+++ /dev/null
-Basic Installation
-==================
-
- These are generic installation instructions.
-
- The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation. It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, a file
-`config.cache' that saves the results of its tests to speed up
-reconfiguring, and a file `config.log' containing compiler output
-(useful mainly for debugging `configure').
-
- If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If at some point `config.cache'
-contains results you don't want to keep, you may remove or edit it.
-
- The file `configure.in' is used to create `configure' by a program
-called `autoconf'. You only need `configure.in' if you want to change
-it or regenerate `configure' using a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
- 1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system. If you're
- using `csh' on an old version of System V, you might need to type
- `sh ./configure' instead to prevent `csh' from trying to execute
- `configure' itself.
-
- Running `configure' takes awhile. While running, it prints some
- messages telling which features it is checking for.
-
- 2. Type `make' to compile the package.
-
- 3. Optionally, type `make check' to run any self-tests that come with
- the package.
-
- 4. Resulting binaries will be in a directory named for the AFS system
- name for which you're building, e.g. i386_linux24 or sun4x_57.
-
- 5. You can remove the program binaries and object files from the
- source code directory by typing `make clean'. To also remove the
- files that `configure' created (so you can compile the package for
- a different kind of computer), type `make distclean'. There is
- also a `make maintainer-clean' target, but that is intended mainly
- for the package's developers. If you use it, you may have to get
- all sorts of other programs in order to regenerate files that came
- with the distribution.
-
-Compilers and Options
-=====================
-
- Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. You can give `configure'
-initial values for variables by setting them in the environment. Using
-a Bourne-compatible shell, you can do that on the command line like
-this:
- CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
-
-Or on systems that have the `env' program, you can do it like this:
- env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
-
-Compiling For Multiple Architectures
-====================================
-
- You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory. To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'. `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
- If you have to use a `make' that does not supports the `VPATH'
-variable, you have to compile the package for one architecture at a time
-in the source code directory. After you have installed the package for
-one architecture, use `make distclean' before reconfiguring for another
-architecture.
-
-Optional Features
-=================
-
- Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System). The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
- For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
- There may be some features `configure' can not figure out
-automatically, but needs to determine by the type of host the package
-will run on. Usually `configure' can figure that out, but if it prints
-a message saying it can not guess the host type, give it the
-`--host=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name with three fields:
- CPU-COMPANY-SYSTEM
-
-See the file `config.sub' for the possible values of each field. If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the host type.
-
- If you are building compiler tools for cross-compiling, you can also
-use the `--target=TYPE' option to select the type of system they will
-produce code for and the `--build=TYPE' option to select the type of
-system on which you are compiling the package.
-
-Sharing Defaults
-================
-
- If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists. Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Operation Controls
-==================
-
- `configure' recognizes the following options to control how it
-operates.
-
-`--cache-file=FILE'
- Use and save the results of the tests in FILE instead of
- `./config.cache'. Set FILE to `/dev/null' to disable caching, for
- debugging `configure'.
-
-`--help'
- Print a summary of the options to `configure', and exit.
-
-`--quiet'
-`--silent'
-`-q'
- Do not print messages saying which checks are being made. To
- suppress all normal output, redirect it to `/dev/null' (any error
- messages will still be shown).
-
-`--srcdir=DIR'
- Look for the package's source code in directory DIR. Usually
- `configure' can determine that directory automatically.
-
-`--version'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
-
-`configure' also accepts some other, not widely useful, options.
-
+++ /dev/null
-Copyright 2000, International Business Machines Corporation and others.
-All Rights Reserved.
-
-This software has been released under the terms of the IBM Public
-License. For details, see the LICENSE file in the top-level source
-directory or online at http://www.openafs.org/dl/license10.html
-
-Building OpenAFS on UNIX and LINUX
-----------------------------------
-
-A. Creating the proper directory structure.
-
- Uncompress the source into a directory of your choice. A directory
- in afs space is also valid. In the directory that you uncompressed the
- source in, you will only have an src/ directory.
-
- 1. Pick a system to build for, and note its default AFS sys_name.
- A directory will be automatically created for binaries to be written
- into with this name when you build.
-
- alpha_dux40
- alpha_dux50 (only tested on 5.0A)
- i386_linux22
- i386_linux24 (only tested with 2.4.0 kernel)
- rs_aix42
- sgi_65 (file server not tested)
- sun4x_56
- sun4x_57
- sun4x_58
- ppc_darwin_13
- alpha_linux_22 (DES does not work, will require one more change to
- compile)
- hp_ux110 (No client support, but db servers and utilities work)
- hp_ux102 (No client support, but db servers and utilities work)
-
- 2. Using configure in the top level directory, configure for your
- AFS system type, providing the necessary flags:
- % ./configure --with-afs-sysname=sun4x_58
-
- For Linux systems you need also provide the patch in which your
- kernel headers for your configured kernel can be found. This should
- be the path of the directory containing a child directory named
- "include". So if your version file was
- /usr/src/linux/include/linux/version.h you would invoke:
- % ./configure --with-afs-sysname=i386_linux24 --with-linux-kernel-headers=/usr/src/linux
-
- Currently you can build for only one Linux kernel at a time,
- and the version is extracted from the kernel headers in the root
- you specify.
-
- Be prepared to provide the switches --enable-obsolete and
- --enable-insecure if you require the use of any bundled but obsolete
- or insecure software included with OpenAFS. See README.obsolete and
- README.insecure for more details.
-
-B Building
-
- 1. Now, you can build OpenAFS.
-
- % make
-
- When the build completes, you will have a complete binary tree
- in the dest directory under the directory named for the sys_name you
- built for, e.g. sun4x_57/dest or i386_linux22/dest
-
- 2. As appropriate you can clean up or, if you're using Linux, build for
- another kernel version:
- a. To clean up:
- % make clean
-
- b. To build for another Linux kernel version:
- the system type defined in step A1.
- % ./configure --with-afs-sysname=i386_linux22 --with-linux-kernel-headers=/usr/src/linux-2.2.19-i686
- % make
-
- Your dest tree will now include an additional kernel module for your
- additional kernel headers. Be aware that if the kernel version string
- which UTS_RELEASE is defined to in include/linux/version.h matches
- the last kernel you built for, the previous kernel module will be
- overwritten.
-
-C Problems
- If you have a problem building this source, you may want to visit
- http://www.openafs.org/ to see if any problems have been reported
- or to find out how to get more help.
-
- Mailing lists have been set up to help; More details can be found
- on the openafs.org site.
-
+++ /dev/null
-The inetd, rcp, rlogind and rsh directories contain AFS authentication (token)
-passing support for their respective utilities. We are not removing these
-utilities as some sites may still be using them, but we *strongly discourage*
-their use. These utilities don't encrypt user traffic, and they also don't
-encrypt the AFS tokens. This means an attacker can capture the data and recover
-a valid authentication token, and use it to perform authenticated operations.
-
-Consider foregoing the rcmds altogether and using ssh. You can get Dug Song's
-ssh patch to support AFS here:
-http://www.monkey.org/~dugsong/ssh-afs/
-but you'll also need to install Kerberos 4 for libraries (which isn't a bad
-idea anyhow). The KTH implementation includes the AFS helper library libkafs,
-and so is desirable:
-ftp://ftp.pdc.kth.se/pub/krb/src/
-
-As a side effect, the insecure, but AFS aware ftpd included in AFS can be
-replaced by the ftpd included in the above-mentioned Kerberos package, as it
-has RFC2228 security extensions.
-
-In any case, carefully consider the security implications before deploying
-these utilities.
-
-To enable building of the insecure code included with OpenAFS, run
-configure with the --enable-insecure switch.
-
projects / packages / o / openafs.git / commitdiff