--- /dev/null
+#
+# File: README
+#
+# Purpose: README for OpenAFS psf file
+#
+# Copyright: None
+#
+# Header: $Header$
+# Header: $Header$
+#
+
+
+This directory contains a Product Specification File (PSF) which defines
+the layout of OpenAFS using the transarc-paths (--enable-transarc-paths). If
+you did not run configure --enable-transarc-paths, using the psf file to
+package the distribution will work, but you will be missing directories
+when running the servers.
+
+The source files and controlled scripts contained in these products'
+filesets are also provided in this directory.
+
+In order to package the sofware using HP's Software Distributor follow
+the following procedure:
+
+Ensure the AFS docs are installed in the AFS build directory.
+
+Install the latest SD patch PHCO_27672, earlier patches will work, but
+this patch fixes several memory leaks.
+
+Change directory to the top level directory, replacing the "x" with the
+correct version number:
+
+ cd <path-to-toplevel>/openafs-1.2.x
+
+Run the configure --enable-transarc-paths
+
+Then create the distribution directory:
+
+ make dest
+
+Once the build in the distribution directory is completed, change dir to
+the swpackage directory:
+
+ cd <path-to-toplevel>/openafs-1.2.x/src/packaging/HP-UX
+
+Test the package creation, replace the "x" with the version just compiled:
+
+ swpackage -p -s psf-1.2.x-transarc-paths-11.00
+
+The package does include vfsck, mount, umount, etc. for installation in
+/sbin/fs/afs. You will have to move the files into
+hp_ux110/dest/root.server/etc in order to package them.
+
+Run:
+ swpackage -s psf-1.2.x-transarc-paths-11.xx [@ /dir/to/destination_depot]
+
+This command will package the product for installation with software distributor
+into /var/spool/sw unless an alternate depot [ @ /dir/to/destination_depot]
+is defined.
+
+Files can be compressed before transfer to the depot by using
+
+ swpackage -x compress_files=true -x reinstall_files=true \
+ -s psf-1.2.x-transarc-paths-11.xx [@ /dir/to/destination_depot]
+
+The psf file is designed to package the software for installation on
+32bit or 64bit HP-UX 11.00. The binaries should be compiled with +DAportable or
++DA1.0, or other options that allow binary compatibility between operating
+the two operating systems (32bit or 64 bit).
+
+When installed, the package does install the kernel library, master.d file,
+regen the kernel and cause a reboot.
+
+The 1.2.10 package does upgrade the 1.2.9 or the 1.2.8 package, so if a
+previous version is packaged and installed a later packaged product will
+upgrade it. (Worked for me).
+
+Follow the Quick Start Guide after installation to configure OPENAFS
+
+Feel free to make any corrections to any mistakes I may have made.
+
+Paul Weber
+Hewlett-Packard
+I N V E N T
--- /dev/null
+
+This is the depot copyright.
+
--- /dev/null
+
+This is the depot description.
+
--- /dev/null
+
+This softare is given freely and is totally unsupported by HP. There are
+no warranties expressed or implied. Installation and use are solely at the
+risk of the installer and user.
+
+Paul Weber
+Hewlett-Packard Consulting
+
--- /dev/null
+
+This softare is given freely and is totally unsupported by HP. There are
+no warranties expressed or implied. Installation and use are solely at the
+risk of the installer and user.
+
+Paul Weber
+Hewlett-Packard Consulting
+
--- /dev/null
+
+This softare is given freely and is totally unsupported by HP. There are
+no warranties expressed or implied. Installation and use are solely at the
+risk of the installer and user.
+
+Paul Weber
+Hewlett-Packard Consulting
+
--- /dev/null
+
+This softare is given freely and is totally unsupported by HP. There are
+no warranties expressed or implied. Installation and use are solely at the
+risk of the installer and user.
+
+Paul Weber
+Hewlett-Packard Consulting
+
--- /dev/null
+
+This softare is given freely and is totally unsupported by HP. There are
+no warranties expressed or implied. Installation and use are solely at the
+risk of the installer and user.
+
+Paul Weber
+Hewlett-Packard Consulting
+
--- /dev/null
+
+This softare is given freely and is totally unsupported by HP. There are
+no warranties expressed or implied. Installation and use are solely at the
+risk of the installer or user.
+
+
--- /dev/null
+
+This is the copyright
+
--- /dev/null
+
+This softare is given freely and is totally unsupported by HP. There are
+no warranties expressed or implied. Installation and use are solely at the
+risk of the installer or user.
+
+
--- /dev/null
+
+This softare is given freely and is totally unsupported by HP. There are
+no warranties expressed or implied. Installation and use are solely at the
+risk of the installer and user.
+
+Paul Weber
+Hewlett-Packard Consulting
+
--- /dev/null
+
+This is the vendor description.
+
--- /dev/null
+>andrew.cmu.edu #Carnegie Mellon University - Computing Services
+128.2.10.11 #vice11.fs.andrew.cmu.edu
+128.2.10.12 #vice12.fs.andrew.cmu.edu
+128.2.10.2 #vice2.fs.andrew.cmu.edu
+128.2.10.28 #vice28.fs.andrew.cmu.edu
+128.2.10.7 #vice7.fs.andrew.cmu.edu
+>cs.cmu.edu #Carnegie Mellon University - School of Comp. Sci.
+128.2.206.130 #cucumber.srv.cs.cmu.edu
+128.2.222.199 #papaya.srv.cs.cmu.edu
+128.2.242.86 #lemon.srv.cs.cmu.edu
+>ece.cmu.edu #Carnegie Mellon University - Elec. Comp. Eng. Dept.
+128.2.129.7 #porok.ece.cmu.edu
+128.2.129.8 #vicio.ece.cmu.edu
+128.2.129.9 #e-xing.ece.cmu.edu
+>athena.mit.edu #MIT/Athena cell
+18.70.0.6 #prill.mit.edu.
+18.145.0.25 #agamemnon.mit.edu.
+18.159.0.34 #chimera.mit.edu.
+>dev.mit.edu #MIT/IS Development cell
+18.86.0.28 #wham.mit.edu.
+18.86.0.50 #hum.mit.edu.
+18.86.0.51 #rattle.mit.edu.
+>net.mit.edu #MIT/Network Group cell
+18.72.1.38 #gracie.mit.edu.
+18.72.0.26 #cetus.mit.edu.
+>sipb.mit.edu #MIT/SIPB cell
+18.181.0.19 #reynelda.mit.edu.
+18.181.0.23 #ronald-ann.mit.edu.
+18.181.0.22 #rosebud.mit.edu.
+>ir.stanford.edu #Stanford University
+171.64.7.222 #afsdb1.stanford.edu
+171.64.7.234 #afsdb2.stanford.edu
+171.64.7.246 #afsdb3.stanford.edu
+>umr.edu #University of Missouri - Rolla
+131.151.1.59 #afs1.umr.edu
+131.151.1.70 #afs6.umr.edu
+131.151.1.146 #afs5.umr.edu
+>dementia.org #Dementia Unlimited
+128.2.35.149 #alycia.dementia.org
+128.2.120.216 #meredith.dementia.org
--- /dev/null
+athena.mit.edu
+net.mit.edu
+sipb.mit.edu
+dev.mit.edu
+ops.mit.edu
--- /dev/null
+/afs:/usr/vice/cache:100000
--- /dev/null
+# File: psf-1.2.10
+#
+# Purpose: OpenAFS Product Specification File (PSF) for swpackage
+#
+# Copyright: Copyright (c) 2003
+#
+# Header: $Header$
+#
+# Description: This PSF contains a valid product definition which includes
+# all attributes for OpenAFS installation via software Distributor
+#
+#
+# Not all control scripts are required for installation of a product/fileset
+#
+# Below is the list of control scripts that can be used on either
+# Products or filesets
+ # Control script definition(s):
+ #
+ # Control scripts are optional. If defined, then specify the
+ # path to the script file.
+ #
+ # NOTE: control scripts can be defined for products too.
+
+ #checkinstall path # Install check script
+ #preinstall path # Install pre-load script
+ #postinstall path # Install post-load script
+ #configure path # Configure for use script
+ #unconfigure path # Configure undo script
+ #verify path # Verify integrity script
+ #checkremove path # Remove check script
+ #preremove path # Remove pre-remove script
+ #postremove path # Remove post-remove script
+ #control_file path # Addition (sub)script or control data
+
+
+ vendor
+
+ tag "OpenSource" # The identifier for the vendor.
+ title "OpenSource Software" # The name of the vendor.
+# uuid "" # The NetLs UUID for the vendor.
+ description < data/vendor.description # A multi-line description of the vendor.
+
+ end #Vendor
+
+ # Product definition(s):
+ #
+ # All product attributes are optional, except for the tag and the
+ # filesets which must be contained within it.
+
+ product
+
+ tag "OPENAFS" # The identifier for the product.
+ title "Open Source Andrews File System" # The name of the product.
+ revision "A.1.2.10" # The revision (release) number of the product.
+
+ #number "the_number" # The order/part number for the product.
+ category "OpenSource"" # The type of software (identifier).
+ #category_title "the category title" # The type of software (string).
+
+ description < data/product.description # A file containing a
+ #multi-line description of the product.
+
+ copyright "(c)Copyright 2002 OpenAFS, All Rights Reserved."
+
+ readme < data/product.README # A multi-page README for the product.
+
+
+ architecture HP-UX_B.11.00_32/64 # A concise summary of hardware/OS'es
+ #supported.
+
+ machine_type *:32* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.00 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+
+ directory /usr/afs # The root directory for the product
+ is_locatable false # If defined then users can install the product
+ # into any directory they specify.
+
+ # Control script definition(s):
+ #
+ # Control scripts are optional. If defined, then specify the
+ # path to the script file.
+ #
+ # NOTE: control scripts can be defined for products or filesets
+
+ configure scripts/openafs.configure
+ unconfigure scripts/openafs.unconfigure
+
+ # Subproduct definition(s):
+ #
+ # Subproducts are optional. If defined, then they group/partition
+ # the product's filesets into logical sets. If defined, then the
+ # tag and contents are required.
+ #
+ # The Runtime subproduct contains anything that is pertinant to
+ # either the server or client products
+ #
+ #
+ subproduct
+ tag Runtime
+ title "Rutime Requirements for OpenAFS Client and Server"
+ contents OPENAFS-RUN
+ end # Runtime subproduct
+ fileset
+ tag OPENAFS-RUN
+ title "OpenAFS Runtime"
+ revision A.1.2.10
+ architecture HP-UX_B.11.00_32/64
+ machine_type *:32* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.00 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ ancestor OPENAFS.OPENAFS-RUN,fa=HP-UX_B.11.00_32/64,fr=<A.1.2.10
+
+ description < data/openafs-run.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+
+
+ #configure scripts/openafs-run.configure
+ #unconfigure scripts/openafs-run.unconfigure
+ #preremove scripts/openafs-run.preremove
+ #postremove scripts/openafs-run.postremove
+
+ # File definition(s):
+ #
+ # To define the files contained in a fileset, you can:
+ #
+ # 1) specify default permissions,
+ # 2) specify files explicitly,
+ # 3) specify files implicitly,
+ # 4) map source pathnames to target pathnames.
+
+ file_permissions -m 755 -o root -g sys
+ directory /usr/afs
+
+ file_permissions -u 222 -o root -g sys
+ directory /usr/vice
+ directory /usr/vice/etc
+ directory /usr/vice/etc/config
+
+ file_permissions -m 755 -o root -g sys
+ directory ../../../hp_ux110/dest/bin = /usr/afs/bin
+ file_permissions -u 222 -o root -g sys
+
+ file afsmonitor
+ file bos
+ file compile_et
+ file dlog
+ file dpass
+ file fs
+ file install
+ file klog
+ file klog.krb
+ file knfs
+ file kpasswd
+ file livesys
+ file rxgen
+ file pagsh
+ file pagsh.krb
+ file pts
+ file scout
+ file sys
+ file tokens
+ file tokens.krb
+ file translate_et
+ file udebug
+ file unlog
+ file xstat_cm_test
+ file xstat_fs_test
+
+ file_permissions -m 755 -o root -g sys
+ directory ../../../hp_ux110/dest/etc = /usr/afs/bin
+ file_permissions -u 222 -o root -g sys
+ file backup
+ file butc
+ file copyauth
+ file fms
+ file fstrace
+ file kas
+ file read_tape
+ file restorevol
+ file rxdebug
+ file uss
+ file vos
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../../../hp_ux110/dest/root.client/usr/vice/etc/dkload = /usr/newconfig/sbin/init.d
+ file afs.rc afs
+
+ end # fileset
+#
+# The DocsByLang subproduct contains documentation pages by language
+
+ subproduct
+ tag DocsByLang
+ title "Manuals by Language"
+ contents OPENAFS-ENG-DOC
+ end # Manuals subproduct
+ fileset
+ tag OPENAFS-ENG-DOC
+ title "OpenAFS English Documentation"
+ revision A.1.2.10
+ machine_type *:32* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.00 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ architecture HP-UX_B.11.00_32/64
+ ancestor OPENAFS.OPENAFS-ENG-DOC,fa=HP-UX_B.11.00_32/64,fr=<A.1.2.10
+
+ description < data/openafs-run.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+
+
+ #unconfigure scripts/openafs-eng-man.unconfigure
+ #verify scripts/openafs-eng-man.verify
+ #checkremove scripts/openafs-eng-man.checkremove
+ #preremove scripts/openafs-eng-man.preremove
+ #postremove scripts/openafs-eng-man.postremove
+ #control_file scripts/openafs-eng-man.subscript
+
+
+ file_permissions -u 222 -o root -g sys
+ directory ../../../doc = /usr/afs/doc
+ file *
+
+ end # fileset
+
+ fileset
+ tag OPENAFS-SRV
+ title "OpenAFS Server"
+ machine_type *:32* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.00 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ revision A.1.2.10
+ architecture HP-UX_B.11.00_32/64
+ ancestor OPENAFS.OPENAFS-SRV,fa=HP-UX_B.11.00_32/64,fr=<A.1.2.10
+
+ description < data/openafs-srv.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+
+ # Require that the Runtime product be in place before installing
+ # Server product.
+
+ prerequisite OPENAFS.OPENAFS-RUN
+ prerequisite OPENAFS.OPENAFS-KRN32 | OPENAFS.OPENAFS-KRN64
+ # corequisite
+
+
+ configure scripts/openafs-srv.configure
+ unconfigure scripts/openafs-srv.unconfigure
+ preremove scripts/openafs-srv.preremove
+
+ #verify scripts/openafs-srv.verify
+ #checkremove scripts/openafs-srv.checkremove
+ #preremove scripts/openafs-srv.preremove
+ #postremove scripts/openafs-srv.postremove
+ #control_file scripts/openafs-srv.subscript
+
+ # File definition(s):
+ #
+
+ file_permissions -u 222 -o bin -g bin
+ directory /sbin/fs/afs
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../../../hp_ux110/dest/root.server/etc = /sbin/fs/afs
+ file bcheckrc
+ file mount
+ file umount
+ file vfsck fsck
+
+ file_permissions -m 755 -o root -g sys
+ directory ../../../hp_ux110/dest/root.server/usr/afs/bin = /usr/afs/bin
+ file_permissions -u 222 -o root -g sys
+ file bosserver
+ file buserver
+ file fileserver
+ file kaserver
+ file kpwvalid
+ file pt_util
+ file ptserver
+ file salvager
+ file upclient
+ file upserver
+ file vlserver
+ file volinfo
+ file volserver
+
+ file_permissions -m 755 -o root -g sys
+ directory ../../../hp_ux110/dest/etc = /usr/afs/bin
+ file_permissions -u 222 -o root -g sys
+ file kadb_check
+ file kdb
+ file kdump
+ file kdump32
+ file kdump64
+ file kseal
+ file rmtsysd
+ file vsys
+ file prdb_check
+ file vldb_check
+ file vldb_convert
+
+ end # fileset
+
+ fileset
+ tag OPENAFS-CLNT
+ title "OpenAFS Client"
+ revision A.1.2.10
+ machine_type *:32* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.00 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ architecture HP-UX_B.11.00_32/64
+ ancestor OPENAFS.OPENAFS-CLNT,fa=HP-UX_B.11.00_32/64,fr=<A.1.2.10
+
+ description < data/openafs-clnt.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+ # If the client is installed, you must install the kernel driver
+ #
+ # This prereq means that either kernel fileset must be installed
+ # the KRN32 for 32 bitOS or KRN64 for 64BIT OS
+
+ prerequisite OPENAFS.OPENAFS-RUN
+ prerequisite OPENAFS.OPENAFS-KRN32 | OPENAFS.OPENAFS-KRN64
+ # corequisite
+
+ checkinstall scripts/openafs-clnt.checkinstall
+ preinstall scripts/openafs-clnt.preinstall
+ configure scripts/openafs-clnt.configure
+ unconfigure scripts/openafs-clnt.unconfigure
+ preremove scripts/openafs-clnt.preremove
+
+ # Have SD create the /usr/vice/cache directories
+ #
+ file_permissions -u 222 -o root -g sys
+ directory /usr/vice/cache
+
+ file_permissions -u 222 -o bin -g bin
+ directory /usr/newconfig/vice
+ directory /usr/newconfig/vice/etc
+
+ file_permissions -u 222 -o root -g sys
+ directory files/afs = /afs
+
+ file_permissions -u 222 -o bin -g bin
+ directory files/usr/vice/etc = /usr/newconfig/usr/vice/etc
+ file CellServDB
+ file SuidCells
+ file cacheinfo
+
+ file_permissions -u 222 -o root -g sys
+ directory ../../../hp_ux110/dest/root.client/usr/vice/etc = /usr/vice/etc
+ file afsd
+
+ directory ../../../hp_ux110/dest/lib = /usr/lib/security
+ file_permissions -u 222 -o bin -g bin
+ file pam_afs.so.1
+ file pam_afs.krb.so.1
+
+ # Startup links will be configured in the configure script
+
+ # File definition(s):
+ #
+ # To define the files contained in a fileset, you can:
+ #
+ # 1) specify default permissions,
+ # 2) specify files explicitly,
+ # 3) specify files implicitly,
+ # 4) map source pathnames to target pathnames.
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../../../hp_ux110/dest/bin = /usr/afs/bin
+ file up
+ file cmdebug
+
+ end # fileset
+
+ #
+ # Put the afs kernel driver filesets into a subproduct
+ # in order that the prerequisite for the client filelset
+ # will automatically select the correct kernel fileset
+ # based on os-bitness
+ subproduct
+ tag Kernel
+ title "OpenAFS Kernel Drivers"
+ contents OPENAFS-KRN32 OPENAFS-KRN64
+ end
+ fileset
+ tag OPENAFS-KRN32
+ title "OpenAFS 32bit Kernel Drivers"
+ revision A.1.2.10
+ machine_type *:32* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.00 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ architecture HP-UX_B.11.00_32
+ ancestor OPENAFS.OPENAFS-KRN,fa=HP-UX_B.11.00_32,fr=<A.1.2.10
+
+ description < data/openafs-krn.description
+
+ is_kernel true
+ is_reboot true
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+ exrequisite OPENAFS.OPENAFS-KRN64
+
+ checkremove scripts/openafs-krn.checkremove
+ configure scripts/openafs-krn.configure
+ postinstall scripts/openafs-krn.postinstall
+ unconfigure scripts/openafs-krn.unconfigure
+ verify scripts/openafs-krn.verify
+
+ # File definition(s):
+ #
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../../../hp_ux110/dest/root.client/bin = /usr/conf/lib
+ file libafs.nonfs.a libafs.a
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../../../hp_ux110/dest/root.client/usr/vice/etc = /usr/conf/master.d
+ file afs.driver afs
+
+ end # fileset
+ fileset
+ tag OPENAFS-KRN64
+ title "OpenAFS 64 bit Kernel Drivers"
+ revision A.1.2.10
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.00 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ machine_type *:64*
+ architecture HP-UX_B.11.00_64
+ ancestor OPENAFS.OPENAFS-KRN,fa=HP-UX_B.11.00_64,fr=<A.1.2.10
+
+ description < data/openafs-krn.description
+
+ is_kernel true
+ is_reboot true
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+ exrequisite OPENAFS.OPENAFS-KRN32
+
+
+ checkremove scripts/openafs-krn.checkremove
+ configure scripts/openafs-krn.configure
+ postinstall scripts/openafs-krn.postinstall
+ unconfigure scripts/openafs-krn.unconfigure
+ verify scripts/openafs-krn.verify
+
+ # File definition(s):
+ #
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../../../hp_ux110/dest/root.client/bin = /usr/conf/lib
+ file libafs64.nonfs.a libafs.a
+
+ end # fileset
+ # End of Kernel subproduct
+ #
+ # We can call this whatever you like, the name falls in line
+ # with other SD packaged media
+ #
+ fileset
+ tag OPENAFS-DEV
+ title "OpenAFS Developers Kit"
+ revision A.1.2.10
+ architecture HP-UX_B.11.00_64
+ ancestor OPENAFS.OPENAFS-DEV,fa=HP-UX_B.11.00_32/64,fr=<A.1.2.10
+ machine_type *:32*
+
+ description < data/openafs-krn.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+
+
+ #unconfigure scripts/openafs-dev.unconfigure
+ #verify scripts/openafs-dev.verify
+ #checkremove scripts/openafs-dev.checkremove
+ #preremove scripts/openafs-dev.preremove
+ #postremove scripts/openafs-dev.postremove
+ #ucontrol_file scripts/openafs-dev.subscript
+
+ # File definition(s):
+ #
+
+# file_permissions -u 222 -o bin -g bin
+# directory ../../../hp_ux110/dest/include = /usr/afs/include
+# file *
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../../../hp_ux110/dest/root.perf/include/afs = /usr/afs/include/afs
+# file afs_stats.h # Included above
+# file afs_sysnames.h # Included above
+ file afs_usrops.h
+# file param.h # Different param.h than above
+# file stds.h
+ file sysincludes.h
+
+ end # fileset
+
+ # The ManualsByLang subproduct contains manual pages by language
+
+ subproduct
+ tag ManualsByLang
+ title "Manuals by Language"
+ contents OPENAFS-ENG-MAN
+ end # Manuals subproduct
+ fileset
+ tag OPENAFS-ENG-MAN
+ title "OpenAFS English Manual Pages"
+ revision A.1.2.10
+ architecture HP-UX_B.11.00_32/64
+ ancestor OPENAFS.OPENAFS-ENG-MAN,fa=HP-UX_B.11.00_32/64,fr=<A.1.2.10
+
+ # description < data/openafs-run.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+
+
+ configure scripts/openafs-eng-man.configure
+ unconfigure scripts/openafs-eng-man.unconfigure
+ #verify scripts/openafs-eng-man.verify
+ #checkremove scripts/openafs-eng-man.checkremove
+ #preremove scripts/openafs-eng-man.preremove
+ #postremove scripts/openafs-eng-man.postremove
+ #control_file scripts/openafs-eng-man.subscript
+
+ # File definition(s):
+ #
+
+ file_permissions -u 222 -o bin -g bin
+ directory /usr/afs/man
+ directory /usr/afs/man/man1
+ directory ../../../src/man = /usr/afs/man/man1
+ file *
+
+ end # fileset
+ end # product
--- /dev/null
+# File: psf-1.2.10-11.11
+#
+# Purpose: OpenAFS Product Specification File (PSF) for swpackage
+#
+# Copyright: Copyright (c) 2003
+#
+# Header: $Header$
+#
+# Description: This PSF contains a valid product definition which includes
+# all attributes for OpenAFS installation via software Distributor
+# This psf is to be used on openafs compiled as 32bit binaries.
+#
+#
+# Not all control scripts are required for installation of a product/fileset
+#
+# Below is the list of control scripts that can be used on either
+# Products or filesets
+ # Control script definition(s):
+ #
+ # Control scripts are optional. If defined, then specify the
+ # path to the script file.
+ #
+ # NOTE: control scripts can be defined for products too.
+
+ #checkinstall path # Install check script
+ #preinstall path # Install pre-load script
+ #postinstall path # Install post-load script
+ #configure path # Configure for use script
+ #unconfigure path # Configure undo script
+ #verify path # Verify integrity script
+ #checkremove path # Remove check script
+ #preremove path # Remove pre-remove script
+ #postremove path # Remove post-remove script
+ #control_file path # Addition (sub)script or control data
+
+
+ vendor
+
+ tag "OpenSource" # The identifier for the vendor.
+ title "OpenSource Software" # The name of the vendor.
+# uuid "" # The NetLs UUID for the vendor.
+ description < data/vendor.description # A multi-line description of the vendor.
+
+ end #Vendor
+
+ # Product definition(s):
+ #
+ # All product attributes are optional, except for the tag and the
+ # filesets which must be contained within it.
+
+ product
+
+ tag "OPENAFS" # The identifier for the product.
+ title "Open Source Andrews File System" # The name of the product.
+ revision "A.1.2.10" # The revision (release) number of the product.
+
+ #number "the_number" # The order/part number for the product.
+ category "OpenSource"" # The type of software (identifier).
+ #category_title "the category title" # The type of software (string).
+
+ description < data/product.description # A file containing a
+ #multi-line description of the product.
+
+ copyright "(c)Copyright 2002 OpenAFS, All Rights Reserved."
+
+ readme < data/product.README # A multi-page README for the product.
+
+
+ architecture HP-UX_B.11.11_32/64 # A concise summary of hardware/OS'es
+ #supported.
+
+ machine_type *:32* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.11 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+
+ directory /usr/afs # The root directory for the product
+ is_locatable false # If defined then users can install the product
+ # into any directory they specify.
+
+ # Control script definition(s):
+ #
+ # Control scripts are optional. If defined, then specify the
+ # path to the script file.
+ #
+ # NOTE: control scripts can be defined for products or filesets
+
+ configure scripts/openafs.configure
+ unconfigure scripts/openafs.unconfigure
+
+ # Subproduct definition(s):
+ #
+ # Subproducts are optional. If defined, then they group/partition
+ # the product's filesets into logical sets. If defined, then the
+ # tag and contents are required.
+ #
+ # The Runtime subproduct contains anything that is pertinant to
+ # either the server or client products
+ #
+ #
+ subproduct
+ tag Runtime
+ title "Rutime Requirements for OpenAFS Client and Server"
+ contents OPENAFS-RUN
+ end # Runtime subproduct
+ fileset
+ tag OPENAFS-RUN
+ title "OpenAFS Runtime"
+ revision A.1.2.10
+ architecture HP-UX_B.11.11_32/64
+ machine_type *:32* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.11 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ ancestor OPENAFS.OPENAFS-RUN,fa=HP-UX_B.11.11_32/64,fr=<A.1.2.10
+
+ description < data/openafs-run.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+
+
+ #configure scripts/openafs-run.configure
+ #unconfigure scripts/openafs-run.unconfigure
+ #preremove scripts/openafs-run.preremove
+ #postremove scripts/openafs-run.postremove
+
+ # File definition(s):
+ #
+ # To define the files contained in a fileset, you can:
+ #
+ # 1) specify default permissions,
+ # 2) specify files explicitly,
+ # 3) specify files implicitly,
+ # 4) map source pathnames to target pathnames.
+
+ file_permissions -m 755 -o root -g sys
+ directory /usr/afs
+
+ file_permissions -u 222 -o root -g sys
+ directory /usr/vice
+ directory /usr/vice/etc
+ directory /usr/vice/etc/config
+
+ file_permissions -m 755 -o root -g sys
+ directory ../../../hp_ux110/dest/bin = /usr/afs/bin
+ file_permissions -u 222 -o root -g sys
+
+ file afsmonitor
+ file bos
+ file compile_et
+ file dlog
+ file dpass
+ file fs
+ file install
+ file klog
+ file klog.krb
+ file knfs
+ file kpasswd
+ file livesys
+ file rxgen
+ file pagsh
+ file pagsh.krb
+ file pts
+ file scout
+ file sys
+ file tokens
+ file tokens.krb
+ file translate_et
+ file udebug
+ file unlog
+ file xstat_cm_test
+ file xstat_fs_test
+
+ file_permissions -m 755 -o root -g sys
+ directory ../../../hp_ux110/dest/etc = /usr/afs/bin
+ file_permissions -u 222 -o root -g sys
+ file backup
+ file butc
+ file copyauth
+ file fms
+ file fstrace
+ file kas
+ file read_tape
+ file restorevol
+ file rxdebug
+ file uss
+ file vos
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../../../hp_ux110/dest/root.client/usr/vice/etc/dkload = /usr/newconfig/sbin/init.d
+ file afs.rc afs
+
+ end # fileset
+#
+# The DocsByLang subproduct contains documentation pages by language
+
+ subproduct
+ tag DocsByLang
+ title "Manuals by Language"
+ contents OPENAFS-ENG-DOC
+ end # Manuals subproduct
+ fileset
+ tag OPENAFS-ENG-DOC
+ title "OpenAFS English Documentation"
+ revision A.1.2.10
+ machine_type *:32* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.11 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ architecture HP-UX_B.11.11_32/64
+ ancestor OPENAFS.OPENAFS-ENG-DOC,fa=HP-UX_B.11.11_32/64,fr=<A.1.2.10
+
+ description < data/openafs-run.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+
+
+ #unconfigure scripts/openafs-eng-man.unconfigure
+ #verify scripts/openafs-eng-man.verify
+ #checkremove scripts/openafs-eng-man.checkremove
+ #preremove scripts/openafs-eng-man.preremove
+ #postremove scripts/openafs-eng-man.postremove
+ #control_file scripts/openafs-eng-man.subscript
+
+
+ file_permissions -u 222 -o root -g sys
+ directory ../../../doc = /usr/afs/doc
+ file *
+
+ end # fileset
+
+ fileset
+ tag OPENAFS-SRV
+ title "OpenAFS Server"
+ machine_type *:32* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.11 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ revision A.1.2.10
+ architecture HP-UX_B.11.11_32/64
+ ancestor OPENAFS.OPENAFS-SRV,fa=HP-UX_B.11.11_32/64,fr=<A.1.2.10
+
+ description < data/openafs-srv.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+
+ # Require that the Runtime product be in place before installing
+ # Server product.
+
+ prerequisite OPENAFS.OPENAFS-RUN
+ prerequisite OPENAFS.OPENAFS-KRN32 | OPENAFS.OPENAFS-KRN64
+ # corequisite
+
+
+ configure scripts/openafs-srv.configure
+ unconfigure scripts/openafs-srv.unconfigure
+ preremove scripts/openafs-srv.preremove
+
+ #verify scripts/openafs-srv.verify
+ #checkremove scripts/openafs-srv.checkremove
+ #preremove scripts/openafs-srv.preremove
+ #postremove scripts/openafs-srv.postremove
+ #control_file scripts/openafs-srv.subscript
+
+ # File definition(s):
+ #
+
+ file_permissions -u 222 -o bin -g bin
+ directory /sbin/fs/afs
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../../../hp_ux110/dest/root.server/etc = /sbin/fs/afs
+ file bcheckrc
+ file mount
+ file umount
+ file vfsck fsck
+
+ file_permissions -m 755 -o root -g sys
+ directory ../../../hp_ux110/dest/root.server/usr/afs/bin = /usr/afs/bin
+ file_permissions -u 222 -o root -g sys
+ file bosserver
+ file buserver
+ file fileserver
+ file kaserver
+ file kpwvalid
+ file pt_util
+ file ptserver
+ file salvager
+ file upclient
+ file upserver
+ file vlserver
+ file volinfo
+ file volserver
+
+ file_permissions -m 755 -o root -g sys
+ directory ../../../hp_ux110/dest/etc = /usr/afs/bin
+ file_permissions -u 222 -o root -g sys
+ file kadb_check
+ file kdb
+ file kdump
+ file kdump32
+ file kdump64
+ file kseal
+ file rmtsysd
+ file vsys
+ file prdb_check
+ file vldb_check
+ file vldb_convert
+
+ end # fileset
+
+ fileset
+ tag OPENAFS-CLNT
+ title "OpenAFS Client"
+ revision A.1.2.10
+ machine_type *:32* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.11 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ architecture HP-UX_B.11.11_32/64
+ ancestor OPENAFS.OPENAFS-CLNT,fa=HP-UX_B.11.11_32/64,fr=<A.1.2.10
+
+ description < data/openafs-clnt.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+ # If the client is installed, you must install the kernel driver
+ #
+ # This prereq means that either kernel fileset must be installed
+ # the KRN32 for 32 bitOS or KRN64 for 64BIT OS
+
+ prerequisite OPENAFS.OPENAFS-RUN
+ prerequisite OPENAFS.OPENAFS-KRN32 | OPENAFS.OPENAFS-KRN64
+ # corequisite
+
+ checkinstall scripts/openafs-clnt.checkinstall
+ preinstall scripts/openafs-clnt.preinstall
+ configure scripts/openafs-clnt.configure
+ unconfigure scripts/openafs-clnt.unconfigure
+ preremove scripts/openafs-clnt.preremove
+
+ # Have SD create the /usr/vice/cache directories
+ #
+ file_permissions -u 222 -o root -g sys
+ directory /usr/vice/cache
+
+ file_permissions -u 222 -o bin -g bin
+ directory /usr/newconfig/vice
+ directory /usr/newconfig/vice/etc
+
+ file_permissions -u 222 -o root -g sys
+ directory files/afs = /afs
+
+ file_permissions -u 222 -o bin -g bin
+ directory files/usr/vice/etc = /usr/newconfig/usr/vice/etc
+ file CellServDB
+ file SuidCells
+ file cacheinfo
+
+ file_permissions -u 222 -o root -g sys
+ directory ../../../hp_ux110/dest/root.client/usr/vice/etc = /usr/vice/etc
+ file afsd
+
+ directory ../../../hp_ux110/dest/lib = /usr/lib/security
+ file_permissions -u 222 -o bin -g bin
+ file pam_afs.so.1
+ file pam_afs.krb.so.1
+
+ # Startup links will be configured in the configure script
+
+ # File definition(s):
+ #
+ # To define the files contained in a fileset, you can:
+ #
+ # 1) specify default permissions,
+ # 2) specify files explicitly,
+ # 3) specify files implicitly,
+ # 4) map source pathnames to target pathnames.
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../../../hp_ux110/dest/bin = /usr/afs/bin
+ file up
+ file cmdebug
+
+ end # fileset
+
+ #
+ # Put the afs kernel driver filesets into a subproduct
+ # in order that the prerequisite for the client filelset
+ # will automatically select the correct kernel fileset
+ # based on os-bitness
+ subproduct
+ tag Kernel
+ title "OpenAFS Kernel Drivers"
+ contents OPENAFS-KRN32 OPENAFS-KRN64
+ end
+ fileset
+ tag OPENAFS-KRN32
+ title "OpenAFS 32bit Kernel Drivers"
+ revision A.1.2.10
+ machine_type *:32* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.11 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ architecture HP-UX_B.11.11_32
+ ancestor OPENAFS.OPENAFS-KRN,fa=HP-UX_B.11.11_32,fr=<A.1.2.10
+
+ description < data/openafs-krn.description
+
+ is_kernel true
+ is_reboot true
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+ exrequisite OPENAFS.OPENAFS-KRN64
+
+ checkremove scripts/openafs-krn.checkremove
+ configure scripts/openafs-krn.configure
+ postinstall scripts/openafs-krn.postinstall
+ unconfigure scripts/openafs-krn.unconfigure
+ verify scripts/openafs-krn.verify
+
+ # File definition(s):
+ #
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../../../hp_ux110/dest/root.client/bin = /usr/conf/lib
+ file libafs.nonfs.a libafs.a
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../../../hp_ux110/dest/root.client/usr/vice/etc = /usr/conf/master.d
+ file afs.driver afs
+
+ end # fileset
+ fileset
+ tag OPENAFS-KRN64
+ title "OpenAFS 64 bit Kernel Drivers"
+ revision A.1.2.10
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.11 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ machine_type *:64*
+ architecture HP-UX_B.11.11_64
+ ancestor OPENAFS.OPENAFS-KRN,fa=HP-UX_B.11.11_64,fr=<A.1.2.10
+
+ description < data/openafs-krn.description
+
+ is_kernel true
+ is_reboot true
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+ exrequisite OPENAFS.OPENAFS-KRN32
+
+
+ checkremove scripts/openafs-krn.checkremove
+ configure scripts/openafs-krn.configure
+ postinstall scripts/openafs-krn.postinstall
+ unconfigure scripts/openafs-krn.unconfigure
+ verify scripts/openafs-krn.verify
+
+ # File definition(s):
+ #
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../../../hp_ux110/dest/root.client/bin = /usr/conf/lib
+ file libafs64.nonfs.a libafs.a
+
+ end # fileset
+ # End of Kernel subproduct
+ #
+ # We can call this whatever you like, the name falls in line
+ # with other SD packaged media
+ #
+ fileset
+ tag OPENAFS-DEV
+ title "OpenAFS Developers Kit"
+ revision A.1.2.10
+ architecture HP-UX_B.11.11_64
+ ancestor OPENAFS.OPENAFS-DEV,fa=HP-UX_B.11.11_32/64,fr=<A.1.2.10
+ machine_type *:32*
+
+ description < data/openafs-krn.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+
+
+ #unconfigure scripts/openafs-dev.unconfigure
+ #verify scripts/openafs-dev.verify
+ #checkremove scripts/openafs-dev.checkremove
+ #preremove scripts/openafs-dev.preremove
+ #postremove scripts/openafs-dev.postremove
+ #ucontrol_file scripts/openafs-dev.subscript
+
+ # File definition(s):
+ #
+
+# file_permissions -u 222 -o bin -g bin
+# directory ../../../hp_ux110/dest/include = /usr/afs/include
+# file *
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../../../hp_ux110/dest/root.perf/include/afs = /usr/afs/include/afs
+# file afs_stats.h # Included above
+# file afs_sysnames.h # Included above
+ file afs_usrops.h
+# file param.h # Different param.h than above
+# file stds.h
+ file sysincludes.h
+
+ end # fileset
+
+ # The ManualsByLang subproduct contains manual pages by language
+
+ subproduct
+ tag ManualsByLang
+ title "Manuals by Language"
+ contents OPENAFS-ENG-MAN
+ end # Manuals subproduct
+ fileset
+ tag OPENAFS-ENG-MAN
+ title "OpenAFS English Manual Pages"
+ revision A.1.2.10
+ architecture HP-UX_B.11.11_32/64
+ ancestor OPENAFS.OPENAFS-ENG-MAN,fa=HP-UX_B.11.11_32/64,fr=<A.1.2.10
+
+ # description < data/openafs-run.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+
+
+ configure scripts/openafs-eng-man.configure
+ unconfigure scripts/openafs-eng-man.unconfigure
+ #verify scripts/openafs-eng-man.verify
+ #checkremove scripts/openafs-eng-man.checkremove
+ #preremove scripts/openafs-eng-man.preremove
+ #postremove scripts/openafs-eng-man.postremove
+ #control_file scripts/openafs-eng-man.subscript
+
+ # File definition(s):
+ #
+
+ file_permissions -u 222 -o bin -g bin
+ directory /usr/afs/man
+ directory /usr/afs/man/man1
+ directory ../../../src/man = /usr/afs/man/man1
+ file *
+
+ end # fileset
+ end # product
--- /dev/null
+# File: psf-1.2.10-11.22
+#
+# Purpose: OpenAFS Product Specification File (PSF) for swpackage
+#
+# Copyright: Copyright (c) 2003
+#
+# Header: $Header$
+#
+# Description: This PSF contains a valid product definition which includes
+# all attributes for OpenAFS installation via software Distributor
+# This psf is for 11.22, Itanium only
+#
+# Not all control scripts are required for installation of a product/fileset
+#
+# Below is the list of control scripts that can be used on either
+# Products or filesets
+ # Control script definition(s):
+ #
+ # Control scripts are optional. If defined, then specify the
+ # path to the script file.
+ #
+ # NOTE: control scripts can be defined for products too.
+
+ #checkinstall path # Install check script
+ #preinstall path # Install pre-load script
+ #postinstall path # Install post-load script
+ #configure path # Configure for use script
+ #unconfigure path # Configure undo script
+ #verify path # Verify integrity script
+ #checkremove path # Remove check script
+ #preremove path # Remove pre-remove script
+ #postremove path # Remove post-remove script
+ #control_file path # Addition (sub)script or control data
+
+
+ vendor
+
+ tag "OpenSource" # The identifier for the vendor.
+ title "OpenSource Software" # The name of the vendor.
+# uuid "" # The NetLs UUID for the vendor.
+ description < data/vendor.description # A multi-line description of the vendor.
+
+ end #Vendor
+
+ # Product definition(s):
+ #
+ # All product attributes are optional, except for the tag and the
+ # filesets which must be contained within it.
+
+ product
+
+ tag "OPENAFS" # The identifier for the product.
+ title "Open Source Andrews File System" # The name of the product.
+ revision "B.1.2.10" # The revision (release) number of the product.
+
+ #number "the_number" # The order/part number for the product.
+ category "OpenSource"" # The type of software (identifier).
+ #category_title "the category title" # The type of software (string).
+
+ description < data/product.description # A file containing a
+ #multi-line description of the product.
+
+ copyright "(c)Copyright 2002 OpenAFS, All Rights Reserved."
+
+ readme < data/product.README # A multi-page README for the product.
+
+
+ architecture HP-UX_B.11.22_IA/PA # A concise summary of hardware/OS'es
+ #supported.
+
+ machine_type ia64* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.22 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+
+ directory /usr/afs # The root directory for the product
+ is_locatable false # If defined then users can install the product
+ # into any directory they specify.
+
+ # Control script definition(s):
+ #
+ # Control scripts are optional. If defined, then specify the
+ # path to the script file.
+ #
+ # NOTE: control scripts can be defined for products or filesets
+
+ configure scripts/openafs.configure
+ unconfigure scripts/openafs.unconfigure
+
+ # Subproduct definition(s):
+ #
+ # Subproducts are optional. If defined, then they group/partition
+ # the product's filesets into logical sets. If defined, then the
+ # tag and contents are required.
+ #
+ # The Runtime subproduct contains anything that is pertinant to
+ # either the server or client products
+ #
+ #
+ subproduct
+ tag Runtime
+ title "Rutime Requirements for OpenAFS Client and Server"
+ contents OPENAFS-RUN
+ end # Runtime subproduct
+ fileset
+ tag OPENAFS-RUN
+ title "OpenAFS Runtime"
+ revision B.1.2.10
+ architecture HP-UX_B.11.22_IA/PA
+ machine_type ia64* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.22 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ ancestor OPENAFS.OPENAFS-RUN,fa=HP-UX_B.11.22_IA/PA,fr=<B.1.2.10
+
+ description < data/openafs-run.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+
+
+ #configure scripts/openafs-run.configure
+ #unconfigure scripts/openafs-run.unconfigure
+ #preremove scripts/openafs-run.preremove
+ #postremove scripts/openafs-run.postremove
+
+ # File definition(s):
+ #
+ # To define the files contained in a fileset, you can:
+ #
+ # 1) specify default permissions,
+ # 2) specify files explicitly,
+ # 3) specify files implicitly,
+ # 4) map source pathnames to target pathnames.
+
+ file_permissions -m 755 -o root -g sys
+ directory /usr/afs
+
+ file_permissions -u 222 -o root -g sys
+ directory /usr/vice
+ directory /usr/vice/etc
+ directory /usr/vice/etc/config
+
+ file_permissions -m 755 -o root -g sys
+ directory ../hp_ux110/dest/bin = /usr/afs/bin
+ file_permissions -u 222 -o root -g sys
+
+ file afsmonitor
+ file bos
+ file compile_et
+ file dlog
+ file dpass
+ file fs
+ file install
+ file klog
+ file klog.krb
+ file knfs
+ file kpasswd
+ file livesys
+ file rxgen
+ file pagsh
+ file pagsh.krb
+ file pts
+ file scout
+ file sys
+ file tokens
+ file tokens.krb
+ file translate_et
+ file udebug
+ file unlog
+ file xstat_cm_test
+ file xstat_fs_test
+
+ file_permissions -m 755 -o root -g sys
+ directory ../hp_ux110/dest/etc = /usr/afs/bin
+ file_permissions -u 222 -o root -g sys
+ file backup
+ file butc
+ file copyauth
+ file fms
+ file fstrace
+ file kas
+ file read_tape
+ file restorevol
+ file rxdebug
+ file uss
+ file vos
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../hp_ux110/dest/root.client/usr/vice/etc/dkload = /usr/newconfig/sbin/init.d
+ file afs.rc afs
+
+ end # fileset
+#
+# The DocsByLang subproduct contains documentation pages by language
+
+ subproduct
+ tag DocsByLang
+ title "Manuals by Language"
+ contents OPENAFS-ENG-DOC
+ end # Manuals subproduct
+ fileset
+ tag OPENAFS-ENG-DOC
+ title "OpenAFS English Documentation"
+ revision B.1.2.10
+ machine_type ia64* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.22 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ architecture HP-UX_B.11.22_IA/PA
+ ancestor OPENAFS.OPENAFS-ENG-DOC,fa=HP-UX_B.11.22_IA/PA,fr=<B.1.2.10
+
+ description < data/openafs-run.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+
+
+ #unconfigure scripts/openafs-eng-man.unconfigure
+ #verify scripts/openafs-eng-man.verify
+ #checkremove scripts/openafs-eng-man.checkremove
+ #preremove scripts/openafs-eng-man.preremove
+ #postremove scripts/openafs-eng-man.postremove
+ #control_file scripts/openafs-eng-man.subscript
+
+
+ file_permissions -u 222 -o root -g sys
+ directory ../doc = /usr/afs/doc
+ file *
+
+ end # fileset
+
+ fileset
+ tag OPENAFS-SRV
+ title "OpenAFS Server"
+ machine_type ia64* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.22 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ revision B.1.2.10
+ architecture HP-UX_B.11.22_IA/PA
+ ancestor OPENAFS.OPENAFS-SRV,fa=HP-UX_B.11.22_IA/PA,fr=<B.1.2.10
+
+ description < data/openafs-srv.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+
+ # Require that the Runtime product be in place before installing
+ # Server product.
+
+ prerequisite OPENAFS.OPENAFS-RUN
+ prerequisite OPENAFS.OPENAFS-KRN64
+ # corequisite
+
+
+ configure scripts/openafs-srv.configure
+ unconfigure scripts/openafs-srv.unconfigure
+ preremove scripts/openafs-srv.preremove
+
+ #verify scripts/openafs-srv.verify
+ #checkremove scripts/openafs-srv.checkremove
+ #preremove scripts/openafs-srv.preremove
+ #postremove scripts/openafs-srv.postremove
+ #control_file scripts/openafs-srv.subscript
+
+ # File definition(s):
+ #
+
+ file_permissions -u 222 -o bin -g bin
+ directory /sbin/fs/afs
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../hp_ux110/dest/root.server/etc = /sbin/fs/afs
+ file bcheckrc
+ file mount
+ file umount
+ file vfsck fsck
+
+ file_permissions -m 755 -o root -g sys
+ directory ../hp_ux110/dest/root.server/usr/afs/bin = /usr/afs/bin
+ file_permissions -u 222 -o root -g sys
+ file bosserver
+ file buserver
+ file fileserver
+ file kaserver
+ file kpwvalid
+ file pt_util
+ file ptserver
+ file salvager
+ file upclient
+ file upserver
+ file vlserver
+ file volinfo
+ file volserver
+
+ file_permissions -m 755 -o root -g sys
+ directory ../hp_ux110/dest/etc = /usr/afs/bin
+ file_permissions -u 222 -o root -g sys
+ file kadb_check
+ file kdb
+ file kdump
+ file kdump32
+ file kdump64
+ file kseal
+ file rmtsysd
+ file vsys
+ file prdb_check
+ file vldb_check
+ file vldb_convert
+
+ end # fileset
+
+ fileset
+ tag OPENAFS-CLNT
+ title "OpenAFS Client"
+ revision B.1.2.10
+ machine_type ia64* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.22 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ architecture HP-UX_B.11.22_IA/PA
+ ancestor OPENAFS.OPENAFS-CLNT,fa=HP-UX_B.11.22_IA/PA,fr=<B.1.2.10
+
+ description < data/openafs-clnt.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+ # If the client is installed, you must install the kernel driver
+ #
+ # This prereq means that the kernel fileset must be installed
+
+ prerequisite OPENAFS.OPENAFS-RUN
+ prerequisite OPENAFS.OPENAFS-KRN64
+ # corequisite
+
+ checkinstall scripts/openafs-clnt.checkinstall
+ preinstall scripts/openafs-clnt.preinstall
+ configure scripts/openafs-clnt.configure
+ unconfigure scripts/openafs-clnt.unconfigure
+ preremove scripts/openafs-clnt.preremove
+
+ # Have SD create the /usr/vice/cache directories
+ #
+ file_permissions -u 222 -o root -g sys
+ directory /usr/vice/cache
+
+ file_permissions -u 222 -o bin -g bin
+ directory /usr/newconfig/vice
+ directory /usr/newconfig/vice/etc
+
+ file_permissions -u 222 -o root -g sys
+ directory files/afs = /afs
+
+ file_permissions -u 222 -o bin -g bin
+ directory files/usr/vice/etc = /usr/newconfig/usr/vice/etc
+ file CellServDB
+ file SuidCells
+ file cacheinfo
+
+ file_permissions -u 222 -o root -g sys
+ directory ../hp_ux110/dest/root.client/usr/vice/etc = /usr/vice/etc
+ file afsd
+
+ directory ../hp_ux110/dest/lib = /usr/lib/security
+ file_permissions -u 222 -o bin -g bin
+ file pam_afs.so.1
+ file pam_afs.krb.so.1
+
+ # Startup links will be configured in the configure script
+
+ # File definition(s):
+ #
+ # To define the files contained in a fileset, you can:
+ #
+ # 1) specify default permissions,
+ # 2) specify files explicitly,
+ # 3) specify files implicitly,
+ # 4) map source pathnames to target pathnames.
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../hp_ux110/dest/bin = /usr/afs/bin
+ file up
+ file cmdebug
+
+ end # fileset
+
+ #
+ # Put the afs kernel driver filesets into a subproduct
+ # in order that the prerequisite for the client filelset
+ # will automatically select the correct kernel fileset
+ # based on os-bitness, leaving as a subproduct for now
+ subproduct
+ tag Kernel
+ title "OpenAFS Kernel Drivers"
+ contents OPENAFS-KRN64
+ end
+ fileset
+ tag OPENAFS-KRN64
+ title "OpenAFS 64 bit Kernel Drivers"
+ revision B.1.2.10
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.22 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ machine_type ia64*
+ architecture HP-UX_B.11.22_IA/PA
+ ancestor OPENAFS.OPENAFS-KRN,fa=HP-UX_B.11.22_IA/PA,fr=<B.1.2.10
+
+ description < data/openafs-krn.description
+
+ is_kernel true
+ is_reboot true
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+ exrequisite OPENAFS.OPENAFS-KRN32
+
+
+ checkremove scripts/openafs-krn.checkremove
+ configure scripts/openafs-krn.configure
+ postinstall scripts/openafs-krn.postinstall
+ unconfigure scripts/openafs-krn.unconfigure
+ verify scripts/openafs-krn.verify
+
+ # File definition(s):
+ #
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../hp_ux110/dest/root.client/bin = /usr/conf/lib
+ file libafs64.nonfs.a libafs.a
+
+ end # fileset
+ # End of Kernel subproduct
+ #
+ # We can call this whatever you like, the name falls in line
+ # with other SD packaged media
+ #
+ filese10
+ tag OPENAFS-DEV
+ title "OpenAFS Developers Kit"
+ revision B.1.2.10
+ architecture HP-UX_B.11.22_IA/PA
+ ancestor OPENAFS.OPENAFS-DEV,fa=HP-UX_B.11.22_IA/PA,fr=<B.1.2.10
+ machine_type ia64*
+
+ description < data/openafs-krn.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+
+
+ #unconfigure scripts/openafs-dev.unconfigure
+ #verify scripts/openafs-dev.verify
+ #checkremove scripts/openafs-dev.checkremove
+ #preremove scripts/openafs-dev.preremove
+ #postremove scripts/openafs-dev.postremove
+ #ucontrol_file scripts/openafs-dev.subscript
+
+ # File definition(s):
+ #
+
+# file_permissions -u 222 -o bin -g bin
+# directory ../hp_ux110/dest/include = /usr/afs/include
+# file *
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../hp_ux110/dest/root.perf/include/afs = /usr/afs/include/afs
+# file afs_stats.h # Included above
+# file afs_sysnames.h # Included above
+ file afs_usrops.h
+# file param.h # Different param.h than above
+# file stds.h
+ file sysincludes.h
+
+ end # fileset
+
+ # The ManualsByLang subproduct contains manual pages by language
+
+ subproduct
+ tag ManualsByLang
+ title "Manuals by Language"
+ contents OPENAFS-ENG-MAN
+ end # Manuals subproduct
+ fileset
+ tag OPENAFS-ENG-MAN
+ title "OpenAFS English Manual Pages"
+ revision B.1.2.10
+ architecture HP-UX_B.11.22_IA/PA
+ ancestor OPENAFS.OPENAFS-ENG-MAN,fa=HP-UX_B.11.22_IA/PA,fr=<B.1.2.10
+
+ # description < data/openafs-run.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+
+
+ configure scripts/openafs-eng-man.configure
+ unconfigure scripts/openafs-eng-man.unconfigure
+ #verify scripts/openafs-eng-man.verify
+ #checkremove scripts/openafs-eng-man.checkremove
+ #preremove scripts/openafs-eng-man.preremove
+ #postremove scripts/openafs-eng-man.postremove
+ #control_file scripts/openafs-eng-man.subscript
+
+ # File definition(s):
+ #
+
+ file_permissions -u 222 -o bin -g bin
+ directory /usr/afs/man
+ directory /usr/afs/man/man1
+ directory ../src/man = /usr/afs/man/man1
+ file *
+
+ end # fileset
+ end # product
--- /dev/null
+# File: psf-1.2.8
+#
+# Purpose: OpenAFS Product Specification File (PSF) for swpackage
+#
+# Copyright: Copyright (c) 2003
+#
+# Header: $Header$
+#
+# Description: This PSF contains a valid product definition which includes
+# all attributes for OpenAFS installation via software Distributor
+#
+#
+# Not all control scripts are required for installation of a product/fileset
+#
+# Below is the list of control scripts that can be used on either
+# Products or filesets
+ # Control script definition(s):
+ #
+ # Control scripts are optional. If defined, then specify the
+ # path to the script file.
+ #
+ # NOTE: control scripts can be defined for products too.
+
+ #checkinstall path # Install check script
+ #preinstall path # Install pre-load script
+ #postinstall path # Install post-load script
+ #configure path # Configure for use script
+ #unconfigure path # Configure undo script
+ #verify path # Verify integrity script
+ #checkremove path # Remove check script
+ #preremove path # Remove pre-remove script
+ #postremove path # Remove post-remove script
+ #control_file path # Addition (sub)script or control data
+
+
+ vendor
+
+ tag "OpenSource" # The identifier for the vendor.
+ title "OpenSource Software" # The name of the vendor.
+# uuid "" # The NetLs UUID for the vendor.
+ description < data/vendor.description # A multi-line description of the vendor.
+
+ end #Vendor
+
+ # Product definition(s):
+ #
+ # All product attributes are optional, except for the tag and the
+ # filesets which must be contained within it.
+
+ product
+
+ tag "OPENAFS" # The identifier for the product.
+ title "Open Source Andrews File System" # The name of the product.
+ revision "A.1.2.8" # The revision (release) number of the product.
+
+ #number "the_number" # The order/part number for the product.
+ category "OpenSource"" # The type of software (identifier).
+ #category_title "the category title" # The type of software (string).
+
+ description < data/product.description # A file containing a
+ #multi-line description of the product.
+
+ copyright "(c)Copyright 2002 OpenAFS, All Rights Reserved."
+
+ readme < data/product.README # A multi-page README for the product.
+
+
+ architecture HP-UX_B.11.00_32/64 # A concise summary of hardware/OS'es
+ #supported.
+
+ machine_type *:32* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.00 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+
+ directory /usr/afs # The root directory for the product
+ is_locatable false # If defined then users can install the product
+ # into any directory they specify.
+
+ # Control script definition(s):
+ #
+ # Control scripts are optional. If defined, then specify the
+ # path to the script file.
+ #
+ # NOTE: control scripts can be defined for products or filesets
+
+ configure scripts/openafs.configure
+ unconfigure scripts/openafs.unconfigure
+
+ # Subproduct definition(s):
+ #
+ # Subproducts are optional. If defined, then they group/partition
+ # the product's filesets into logical sets. If defined, then the
+ # tag and contents are required.
+ #
+ # The Runtime subproduct contains anything that is pertinant to
+ # either the server or client products
+ #
+ #
+ subproduct
+ tag Runtime
+ title "Rutime Requirements for OpenAFS Client and Server"
+ contents OPENAFS-RUN
+ end # Runtime subproduct
+ fileset
+ tag OPENAFS-RUN
+ title "OpenAFS Runtime"
+ revision A.1.2.8
+ architecture HP-UX_B.11.00_32/64
+ machine_type *:32* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.00 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ ancestor OPENAFS.OPENAFS-RUN,fa=HP-UX_B.11.00_32/64,fr=<A.1.2.8
+
+ description < data/openafs-run.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+
+
+ #configure scripts/openafs-run.configure
+ #unconfigure scripts/openafs-run.unconfigure
+ #preremove scripts/openafs-run.preremove
+ #postremove scripts/openafs-run.postremove
+
+ # File definition(s):
+ #
+ # To define the files contained in a fileset, you can:
+ #
+ # 1) specify default permissions,
+ # 2) specify files explicitly,
+ # 3) specify files implicitly,
+ # 4) map source pathnames to target pathnames.
+
+ file_permissions -m 755 -o root -g sys
+ directory /usr/afs
+
+ file_permissions -u 222 -o root -g sys
+ directory /usr/vice
+ directory /usr/vice/etc
+ directory /usr/vice/etc/config
+
+ file_permissions -m 755 -o root -g sys
+ directory ../hp_ux110/dest/bin = /usr/afs/bin
+ file_permissions -u 222 -o root -g sys
+
+ file afsmonitor
+ file bos
+ file compile_et
+ file dlog
+ file dpass
+ file fs
+ file install
+ file klog
+ file klog.krb
+ file knfs
+ file kpasswd
+ file livesys
+ file rxgen
+ file pagsh
+ file pagsh.krb
+ file pts
+ file scout
+ file sys
+ file tokens
+ file tokens.krb
+ file translate_et
+ file udebug
+ file unlog
+ file xstat_cm_test
+ file xstat_fs_test
+
+ file_permissions -m 755 -o root -g sys
+ directory ../hp_ux110/dest/etc = /usr/afs/bin
+ file_permissions -u 222 -o root -g sys
+ file backup
+ file butc
+ file copyauth
+ file fms
+ file fstrace
+ file kas
+ file read_tape
+ file restorevol
+ file rxdebug
+ file uss
+ file vos
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../hp_ux110/dest/root.client/usr/vice/etc/dkload = /usr/newconfig/sbin/init.d
+ file afs.rc afs
+
+ end # fileset
+#
+# The DocsByLang subproduct contains documentation pages by language
+
+ subproduct
+ tag DocsByLang
+ title "Manuals by Language"
+ contents OPENAFS-ENG-DOC
+ end # Manuals subproduct
+ fileset
+ tag OPENAFS-ENG-DOC
+ title "OpenAFS English Documentation"
+ revision A.1.2.8
+ machine_type *:32* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.00 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ architecture HP-UX_B.11.00_32/64
+ ancestor OPENAFS.OPENAFS-ENG-DOC,fa=HP-UX_B.11.00_32/64,fr=<A.1.2.8
+
+ description < data/openafs-run.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+
+
+ #unconfigure scripts/openafs-eng-man.unconfigure
+ #verify scripts/openafs-eng-man.verify
+ #checkremove scripts/openafs-eng-man.checkremove
+ #preremove scripts/openafs-eng-man.preremove
+ #postremove scripts/openafs-eng-man.postremove
+ #control_file scripts/openafs-eng-man.subscript
+
+
+ file_permissions -u 222 -o root -g sys
+ directory ../doc = /usr/afs/doc
+ file *
+
+ end # fileset
+
+ fileset
+ tag OPENAFS-SRV
+ title "OpenAFS Server"
+ machine_type *:32* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.00 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ revision A.1.2.8
+ architecture HP-UX_B.11.00_32/64
+ ancestor OPENAFS.OPENAFS-SRV,fa=HP-UX_B.11.00_32/64,fr=<A.1.2.8
+
+ description < data/openafs-srv.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+
+ # Require that the Runtime product be in place before installing
+ # Server product.
+
+ prerequisite OPENAFS.OPENAFS-RUN
+ prerequisite OPENAFS.OPENAFS-KRN32 | OPENAFS.OPENAFS-KRN64
+ # corequisite
+
+
+ configure scripts/openafs-srv.configure
+ unconfigure scripts/openafs-srv.unconfigure
+ preremove scripts/openafs-srv.preremove
+
+ #verify scripts/openafs-srv.verify
+ #checkremove scripts/openafs-srv.checkremove
+ #preremove scripts/openafs-srv.preremove
+ #postremove scripts/openafs-srv.postremove
+ #control_file scripts/openafs-srv.subscript
+
+ # File definition(s):
+ #
+
+ file_permissions -u 222 -o bin -g bin
+ directory /sbin/fs/afs
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../hp_ux110/dest/root.server/etc = /sbin/fs/afs
+ file bcheckrc
+ file mount
+ file umount
+ file vfsck fsck
+
+ file_permissions -m 755 -o root -g sys
+ directory ../hp_ux110/dest/root.server/usr/afs/bin = /usr/afs/bin
+ file_permissions -u 222 -o root -g sys
+ file bosserver
+ file buserver
+ file fileserver
+ file kaserver
+ file kpwvalid
+ file pt_util
+ file ptserver
+ file salvager
+ file upclient
+ file upserver
+ file vlserver
+ file volinfo
+ file volserver
+
+ file_permissions -m 755 -o root -g sys
+ directory ../hp_ux110/dest/etc = /usr/afs/bin
+ file_permissions -u 222 -o root -g sys
+ file kadb_check
+ file kdb
+ file kdump
+ file kdump32
+ file kdump64
+ file kseal
+ file rmtsysd
+ file vsys
+ file prdb_check
+ file vldb_check
+ file vldb_convert
+
+ end # fileset
+
+ fileset
+ tag OPENAFS-CLNT
+ title "OpenAFS Client"
+ revision A.1.2.8
+ machine_type *:32* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.00 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ architecture HP-UX_B.11.00_32/64
+ ancestor OPENAFS.OPENAFS-CLNT,fa=HP-UX_B.11.00_32/64,fr=<A.1.2.8
+
+ description < data/openafs-clnt.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+ # If the client is installed, you must install the kernel driver
+ #
+ # This prereq means that either kernel fileset must be installed
+ # the KRN32 for 32 bitOS or KRN64 for 64BIT OS
+
+ prerequisite OPENAFS.OPENAFS-RUN
+ prerequisite OPENAFS.OPENAFS-KRN32 | OPENAFS.OPENAFS-KRN64
+ # corequisite
+
+ checkinstall scripts/openafs-clnt.checkinstall
+ preinstall scripts/openafs-clnt.preinstall
+ configure scripts/openafs-clnt.configure
+ unconfigure scripts/openafs-clnt.unconfigure
+ preremove scripts/openafs-clnt.preremove
+
+ # Have SD create the /usr/vice/cache directories
+ #
+ file_permissions -u 222 -o root -g sys
+ directory /usr/vice/cache
+
+ file_permissions -u 222 -o bin -g bin
+ directory /usr/newconfig/vice
+ directory /usr/newconfig/vice/etc
+
+ file_permissions -u 222 -o root -g sys
+ directory files/afs = /afs
+
+ file_permissions -u 222 -o bin -g bin
+ directory files/usr/vice/etc = /usr/newconfig/usr/vice/etc
+ file CellServDB
+ file SuidCells
+ file cacheinfo
+
+ file_permissions -u 222 -o root -g sys
+ directory ../hp_ux110/dest/root.client/usr/vice/etc = /usr/vice/etc
+ file afsd
+
+ directory ../hp_ux110/dest/lib = /usr/lib/security
+ file_permissions -u 222 -o bin -g bin
+ file pam_afs.so.1
+ file pam_afs.krb.so.1
+
+ # Startup links will be configured in the configure script
+
+ # File definition(s):
+ #
+ # To define the files contained in a fileset, you can:
+ #
+ # 1) specify default permissions,
+ # 2) specify files explicitly,
+ # 3) specify files implicitly,
+ # 4) map source pathnames to target pathnames.
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../hp_ux110/dest/bin = /usr/afs/bin
+ file up
+ file cmdebug
+
+ end # fileset
+
+ #
+ # Put the afs kernel driver filesets into a subproduct
+ # in order that the prerequisite for the client filelset
+ # will automatically select the correct kernel fileset
+ # based on os-bitness
+ subproduct
+ tag Kernel
+ title "OpenAFS Kernel Drivers"
+ contents OPENAFS-KRN32 OPENAFS-KRN64
+ end
+ fileset
+ tag OPENAFS-KRN32
+ title "OpenAFS 32bit Kernel Drivers"
+ revision A.1.2.8
+ machine_type *:32* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.00 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ architecture HP-UX_B.11.00_32
+ ancestor OPENAFS.OPENAFS-KRN,fa=HP-UX_B.11.00_32,fr=<A.1.2.8
+
+ description < data/openafs-krn.description
+
+ is_kernel true
+ is_reboot true
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+ exrequisite OPENAFS.OPENAFS-KRN64
+
+ checkremove scripts/openafs-krn.checkremove
+ configure scripts/openafs-krn.configure
+ postinstall scripts/openafs-krn.postinstall
+ unconfigure scripts/openafs-krn.unconfigure
+ verify scripts/openafs-krn.verify
+
+ # File definition(s):
+ #
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../hp_ux110/dest/root.client/bin = /usr/conf/lib
+ file libafs.nonfs.a libafs.a
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../hp_ux110/dest/root.client/usr/vice/etc = /usr/conf/master.d
+ file afs.driver afs
+
+ end # fileset
+ fileset
+ tag OPENAFS-KRN64
+ title "OpenAFS 64 bit Kernel Drivers"
+ revision A.1.2.8
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.00 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ machine_type *:64*
+ architecture HP-UX_B.11.00_64
+ ancestor OPENAFS.OPENAFS-KRN,fa=HP-UX_B.11.00_64,fr=<A.1.2.8
+
+ description < data/openafs-krn.description
+
+ is_kernel true
+ is_reboot true
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+ exrequisite OPENAFS.OPENAFS-KRN32
+
+
+ checkremove scripts/openafs-krn.checkremove
+ configure scripts/openafs-krn.configure
+ postinstall scripts/openafs-krn.postinstall
+ unconfigure scripts/openafs-krn.unconfigure
+ verify scripts/openafs-krn.verify
+
+ # File definition(s):
+ #
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../hp_ux110/dest/root.client/bin = /usr/conf/lib
+ file libafs64.nonfs.a libafs.a
+
+ end # fileset
+ # End of Kernel subproduct
+ #
+ # We can call this whatever you like, the name falls in line
+ # with other SD packaged media
+ #
+ fileset
+ tag OPENAFS-DEV
+ title "OpenAFS Developers Kit"
+ revision A.1.2.8
+ architecture HP-UX_B.11.00_64
+ ancestor OPENAFS.OPENAFS-DEV,fa=HP-UX_B.11.00_32/64,fr=<A.1.2.8
+ machine_type *:32*
+
+ description < data/openafs-krn.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+
+
+ #unconfigure scripts/openafs-dev.unconfigure
+ #verify scripts/openafs-dev.verify
+ #checkremove scripts/openafs-dev.checkremove
+ #preremove scripts/openafs-dev.preremove
+ #postremove scripts/openafs-dev.postremove
+ #ucontrol_file scripts/openafs-dev.subscript
+
+ # File definition(s):
+ #
+
+# file_permissions -u 222 -o bin -g bin
+# directory ../hp_ux110/dest/include = /usr/afs/include
+# file *
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../hp_ux110/dest/root.perf/include/afs = /usr/afs/include/afs
+# file afs_stats.h # Included above
+# file afs_sysnames.h # Included above
+ file afs_usrops.h
+# file param.h # Different param.h than above
+# file stds.h
+ file sysincludes.h
+
+ end # fileset
+
+ # The ManualsByLang subproduct contains manual pages by language
+
+ subproduct
+ tag ManualsByLang
+ title "Manuals by Language"
+ contents OPENAFS-ENG-MAN
+ end # Manuals subproduct
+ fileset
+ tag OPENAFS-ENG-MAN
+ title "OpenAFS English Manual Pages"
+ revision A.1.2.8
+ architecture HP-UX_B.11.00_32/64
+ ancestor OPENAFS.OPENAFS-ENG-MAN,fa=HP-UX_B.11.00_32/64,fr=<A.1.2.8
+
+ # description < data/openafs-run.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+
+
+ configure scripts/openafs-eng-man.configure
+ unconfigure scripts/openafs-eng-man.unconfigure
+ #verify scripts/openafs-eng-man.verify
+ #checkremove scripts/openafs-eng-man.checkremove
+ #preremove scripts/openafs-eng-man.preremove
+ #postremove scripts/openafs-eng-man.postremove
+ #control_file scripts/openafs-eng-man.subscript
+
+ # File definition(s):
+ #
+
+ file_permissions -u 222 -o bin -g bin
+ directory /usr/afs/man
+ directory /usr/afs/man/man1
+ directory ../src/man = /usr/afs/man/man1
+ file *
+
+ end # fileset
+ end # product
--- /dev/null
+# File: psf-1.2.9
+#
+# Purpose: OpenAFS Product Specification File (PSF) for swpackage
+#
+# Copyright: Copyright (c) 2003
+#
+# Header: $Header$
+#
+# Description: This PSF contains a valid product definition which includes
+# all attributes for OpenAFS installation via software Distributor
+#
+#
+# Not all control scripts are required for installation of a product/fileset
+#
+# Below is the list of control scripts that can be used on either
+# Products or filesets
+ # Control script definition(s):
+ #
+ # Control scripts are optional. If defined, then specify the
+ # path to the script file.
+ #
+ # NOTE: control scripts can be defined for products too.
+
+ #checkinstall path # Install check script
+ #preinstall path # Install pre-load script
+ #postinstall path # Install post-load script
+ #configure path # Configure for use script
+ #unconfigure path # Configure undo script
+ #verify path # Verify integrity script
+ #checkremove path # Remove check script
+ #preremove path # Remove pre-remove script
+ #postremove path # Remove post-remove script
+ #control_file path # Addition (sub)script or control data
+
+
+ vendor
+
+ tag "OpenSource" # The identifier for the vendor.
+ title "OpenSource Software" # The name of the vendor.
+# uuid "" # The NetLs UUID for the vendor.
+ description < data/vendor.description # A multi-line description of the vendor.
+
+ end #Vendor
+
+ # Product definition(s):
+ #
+ # All product attributes are optional, except for the tag and the
+ # filesets which must be contained within it.
+
+ product
+
+ tag "OPENAFS" # The identifier for the product.
+ title "Open Source Andrews File System" # The name of the product.
+ revision "A.1.2.9" # The revision (release) number of the product.
+
+ #number "the_number" # The order/part number for the product.
+ category "OpenSource"" # The type of software (identifier).
+ #category_title "the category title" # The type of software (string).
+
+ description < data/product.description # A file containing a
+ #multi-line description of the product.
+
+ copyright "(c)Copyright 2002 OpenAFS, All Rights Reserved."
+
+ readme < data/product.README # A multi-page README for the product.
+
+
+ architecture HP-UX_B.11.00_32/64 # A concise summary of hardware/OS'es
+ #supported.
+
+ machine_type *:32* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.00 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+
+ directory /usr/afs # The root directory for the product
+ is_locatable false # If defined then users can install the product
+ # into any directory they specify.
+
+ # Control script definition(s):
+ #
+ # Control scripts are optional. If defined, then specify the
+ # path to the script file.
+ #
+ # NOTE: control scripts can be defined for products or filesets
+
+ configure scripts/openafs.configure
+ unconfigure scripts/openafs.unconfigure
+
+ # Subproduct definition(s):
+ #
+ # Subproducts are optional. If defined, then they group/partition
+ # the product's filesets into logical sets. If defined, then the
+ # tag and contents are required.
+ #
+ # The Runtime subproduct contains anything that is pertinant to
+ # either the server or client products
+ #
+ #
+ subproduct
+ tag Runtime
+ title "Rutime Requirements for OpenAFS Client and Server"
+ contents OPENAFS-RUN
+ end # Runtime subproduct
+ fileset
+ tag OPENAFS-RUN
+ title "OpenAFS Runtime"
+ revision A.1.2.9
+ architecture HP-UX_B.11.00_32/64
+ machine_type *:32* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.00 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ ancestor OPENAFS.OPENAFS-RUN,fa=HP-UX_B.11.00_32/64,fr=<A.1.2.9
+
+ description < data/openafs-run.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+
+
+ #configure scripts/openafs-run.configure
+ #unconfigure scripts/openafs-run.unconfigure
+ #preremove scripts/openafs-run.preremove
+ #postremove scripts/openafs-run.postremove
+
+ # File definition(s):
+ #
+ # To define the files contained in a fileset, you can:
+ #
+ # 1) specify default permissions,
+ # 2) specify files explicitly,
+ # 3) specify files implicitly,
+ # 4) map source pathnames to target pathnames.
+
+ file_permissions -m 755 -o root -g sys
+ directory /usr/afs
+
+ file_permissions -u 222 -o root -g sys
+ directory /usr/vice
+ directory /usr/vice/etc
+ directory /usr/vice/etc/config
+
+ file_permissions -m 755 -o root -g sys
+ directory ../../../hp_ux110/dest/bin = /usr/afs/bin
+ file_permissions -u 222 -o root -g sys
+
+ file afsmonitor
+ file bos
+ file compile_et
+ file dlog
+ file dpass
+ file fs
+ file install
+ file klog
+ file klog.krb
+ file knfs
+ file kpasswd
+ file livesys
+ file rxgen
+ file pagsh
+ file pagsh.krb
+ file pts
+ file scout
+ file sys
+ file tokens
+ file tokens.krb
+ file translate_et
+ file udebug
+ file unlog
+ file xstat_cm_test
+ file xstat_fs_test
+
+ file_permissions -m 755 -o root -g sys
+ directory ../../../hp_ux110/dest/etc = /usr/afs/bin
+ file_permissions -u 222 -o root -g sys
+ file backup
+ file butc
+ file copyauth
+ file fms
+ file fstrace
+ file kas
+ file read_tape
+ file restorevol
+ file rxdebug
+ file uss
+ file vos
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../../../hp_ux110/dest/root.client/usr/vice/etc/dkload = /usr/newconfig/sbin/init.d
+ file afs.rc afs
+
+ end # fileset
+#
+# The DocsByLang subproduct contains documentation pages by language
+
+ subproduct
+ tag DocsByLang
+ title "Manuals by Language"
+ contents OPENAFS-ENG-DOC
+ end # Manuals subproduct
+ fileset
+ tag OPENAFS-ENG-DOC
+ title "OpenAFS English Documentation"
+ revision A.1.2.9
+ machine_type *:32* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.00 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ architecture HP-UX_B.11.00_32/64
+ ancestor OPENAFS.OPENAFS-ENG-DOC,fa=HP-UX_B.11.00_32/64,fr=<A.1.2.9
+
+ description < data/openafs-run.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+
+
+ #unconfigure scripts/openafs-eng-man.unconfigure
+ #verify scripts/openafs-eng-man.verify
+ #checkremove scripts/openafs-eng-man.checkremove
+ #preremove scripts/openafs-eng-man.preremove
+ #postremove scripts/openafs-eng-man.postremove
+ #control_file scripts/openafs-eng-man.subscript
+
+
+ file_permissions -u 222 -o root -g sys
+ directory ../../../doc = /usr/afs/doc
+ file *
+
+ end # fileset
+
+ fileset
+ tag OPENAFS-SRV
+ title "OpenAFS Server"
+ machine_type *:32* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.00 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ revision A.1.2.9
+ architecture HP-UX_B.11.00_32/64
+ ancestor OPENAFS.OPENAFS-SRV,fa=HP-UX_B.11.00_32/64,fr=<A.1.2.9
+
+ description < data/openafs-srv.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+
+ # Require that the Runtime product be in place before installing
+ # Server product.
+
+ prerequisite OPENAFS.OPENAFS-RUN
+ prerequisite OPENAFS.OPENAFS-KRN32 | OPENAFS.OPENAFS-KRN64
+ # corequisite
+
+
+ configure scripts/openafs-srv.configure
+ unconfigure scripts/openafs-srv.unconfigure
+ preremove scripts/openafs-srv.preremove
+
+ #verify scripts/openafs-srv.verify
+ #checkremove scripts/openafs-srv.checkremove
+ #preremove scripts/openafs-srv.preremove
+ #postremove scripts/openafs-srv.postremove
+ #control_file scripts/openafs-srv.subscript
+
+ # File definition(s):
+ #
+
+ file_permissions -u 222 -o bin -g bin
+ directory /sbin/fs/afs
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../../../hp_ux110/dest/root.server/etc = /sbin/fs/afs
+ file bcheckrc
+ file mount
+ file umount
+ file vfsck fsck
+
+ file_permissions -m 755 -o root -g sys
+ directory ../../../hp_ux110/dest/root.server/usr/afs/bin = /usr/afs/bin
+ file_permissions -u 222 -o root -g sys
+ file bosserver
+ file buserver
+ file fileserver
+ file kaserver
+ file kpwvalid
+ file pt_util
+ file ptserver
+ file salvager
+ file upclient
+ file upserver
+ file vlserver
+ file volinfo
+ file volserver
+
+ file_permissions -m 755 -o root -g sys
+ directory ../../../hp_ux110/dest/etc = /usr/afs/bin
+ file_permissions -u 222 -o root -g sys
+ file kadb_check
+ file kdb
+ file kdump
+ file kdump32
+ file kdump64
+ file kseal
+ file rmtsysd
+ file vsys
+ file prdb_check
+ file vldb_check
+ file vldb_convert
+
+ end # fileset
+
+ fileset
+ tag OPENAFS-CLNT
+ title "OpenAFS Client"
+ revision A.1.2.9
+ machine_type *:32* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.00 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ architecture HP-UX_B.11.00_32/64
+ ancestor OPENAFS.OPENAFS-CLNT,fa=HP-UX_B.11.00_32/64,fr=<A.1.2.9
+
+ description < data/openafs-clnt.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+ # If the client is installed, you must install the kernel driver
+ #
+ # This prereq means that either kernel fileset must be installed
+ # the KRN32 for 32 bitOS or KRN64 for 64BIT OS
+
+ prerequisite OPENAFS.OPENAFS-RUN
+ prerequisite OPENAFS.OPENAFS-KRN32 | OPENAFS.OPENAFS-KRN64
+ # corequisite
+
+ checkinstall scripts/openafs-clnt.checkinstall
+ preinstall scripts/openafs-clnt.preinstall
+ configure scripts/openafs-clnt.configure
+ unconfigure scripts/openafs-clnt.unconfigure
+ preremove scripts/openafs-clnt.preremove
+
+ # Have SD create the /usr/vice/cache directories
+ #
+ file_permissions -u 222 -o root -g sys
+ directory /usr/vice/cache
+
+ file_permissions -u 222 -o bin -g bin
+ directory /usr/newconfig/vice
+ directory /usr/newconfig/vice/etc
+
+ file_permissions -u 222 -o root -g sys
+ directory files/afs = /afs
+
+ file_permissions -u 222 -o bin -g bin
+ directory files/usr/vice/etc = /usr/newconfig/usr/vice/etc
+ file CellServDB
+ file SuidCells
+ file cacheinfo
+
+ file_permissions -u 222 -o root -g sys
+ directory ../../../hp_ux110/dest/root.client/usr/vice/etc = /usr/vice/etc
+ file afsd
+
+ directory ../../../hp_ux110/dest/lib = /usr/lib/security
+ file_permissions -u 222 -o bin -g bin
+ file pam_afs.so.1
+ file pam_afs.krb.so.1
+
+ # Startup links will be configured in the configure script
+
+ # File definition(s):
+ #
+ # To define the files contained in a fileset, you can:
+ #
+ # 1) specify default permissions,
+ # 2) specify files explicitly,
+ # 3) specify files implicitly,
+ # 4) map source pathnames to target pathnames.
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../../../hp_ux110/dest/bin = /usr/afs/bin
+ file up
+ file cmdebug
+
+ end # fileset
+
+ #
+ # Put the afs kernel driver filesets into a subproduct
+ # in order that the prerequisite for the client filelset
+ # will automatically select the correct kernel fileset
+ # based on os-bitness
+ subproduct
+ tag Kernel
+ title "OpenAFS Kernel Drivers"
+ contents OPENAFS-KRN32 OPENAFS-KRN64
+ end
+ fileset
+ tag OPENAFS-KRN32
+ title "OpenAFS 32bit Kernel Drivers"
+ revision A.1.2.9
+ machine_type *:32* # Machines the product supports (uname -m).
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.00 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ architecture HP-UX_B.11.00_32
+ ancestor OPENAFS.OPENAFS-KRN,fa=HP-UX_B.11.00_32,fr=<A.1.2.9
+
+ description < data/openafs-krn.description
+
+ is_kernel true
+ is_reboot true
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+ exrequisite OPENAFS.OPENAFS-KRN64
+
+ checkremove scripts/openafs-krn.checkremove
+ configure scripts/openafs-krn.configure
+ postinstall scripts/openafs-krn.postinstall
+ unconfigure scripts/openafs-krn.unconfigure
+ verify scripts/openafs-krn.verify
+
+ # File definition(s):
+ #
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../../../hp_ux110/dest/root.client/bin = /usr/conf/lib
+ file libafs.nonfs.a libafs.a
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../../../hp_ux110/dest/root.client/usr/vice/etc = /usr/conf/master.d
+ file afs.driver afs
+
+ end # fileset
+ fileset
+ tag OPENAFS-KRN64
+ title "OpenAFS 64 bit Kernel Drivers"
+ revision A.1.2.9
+ os_name HP-UX # OS'es the product supports (uname -s).
+ os_release ?.11.00 # OS releases the product supports (uname -r).
+ os_version * # OS versions the product supports (uname -v).
+ machine_type *:64*
+ architecture HP-UX_B.11.00_64
+ ancestor OPENAFS.OPENAFS-KRN,fa=HP-UX_B.11.00_64,fr=<A.1.2.9
+
+ description < data/openafs-krn.description
+
+ is_kernel true
+ is_reboot true
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+ exrequisite OPENAFS.OPENAFS-KRN32
+
+
+ checkremove scripts/openafs-krn.checkremove
+ configure scripts/openafs-krn.configure
+ postinstall scripts/openafs-krn.postinstall
+ unconfigure scripts/openafs-krn.unconfigure
+ verify scripts/openafs-krn.verify
+
+ # File definition(s):
+ #
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../../../hp_ux110/dest/root.client/bin = /usr/conf/lib
+ file libafs64.nonfs.a libafs.a
+
+ end # fileset
+ # End of Kernel subproduct
+ #
+ # We can call this whatever you like, the name falls in line
+ # with other SD packaged media
+ #
+ fileset
+ tag OPENAFS-DEV
+ title "OpenAFS Developers Kit"
+ revision A.1.2.9
+ architecture HP-UX_B.11.00_64
+ ancestor OPENAFS.OPENAFS-DEV,fa=HP-UX_B.11.00_32/64,fr=<A.1.2.9
+ machine_type *:32*
+
+ description < data/openafs-krn.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+
+
+ #unconfigure scripts/openafs-dev.unconfigure
+ #verify scripts/openafs-dev.verify
+ #checkremove scripts/openafs-dev.checkremove
+ #preremove scripts/openafs-dev.preremove
+ #postremove scripts/openafs-dev.postremove
+ #ucontrol_file scripts/openafs-dev.subscript
+
+ # File definition(s):
+ #
+
+# file_permissions -u 222 -o bin -g bin
+# directory ../../../hp_ux110/dest/include = /usr/afs/include
+# file *
+
+ file_permissions -u 222 -o bin -g bin
+ directory ../../../hp_ux110/dest/root.perf/include/afs = /usr/afs/include/afs
+# file afs_stats.h # Included above
+# file afs_sysnames.h # Included above
+ file afs_usrops.h
+# file param.h # Different param.h than above
+# file stds.h
+ file sysincludes.h
+
+ end # fileset
+
+ # The ManualsByLang subproduct contains manual pages by language
+
+ subproduct
+ tag ManualsByLang
+ title "Manuals by Language"
+ contents OPENAFS-ENG-MAN
+ end # Manuals subproduct
+ fileset
+ tag OPENAFS-ENG-MAN
+ title "OpenAFS English Manual Pages"
+ revision A.1.2.9
+ architecture HP-UX_B.11.00_32/64
+ ancestor OPENAFS.OPENAFS-ENG-MAN,fa=HP-UX_B.11.00_32/64,fr=<A.1.2.9
+
+ # description < data/openafs-run.description
+
+ is_kernel false
+ is_reboot false
+
+ # Dependency definition(s):
+ #
+
+ # prerequisite
+ # corequisite
+
+
+ configure scripts/openafs-eng-man.configure
+ unconfigure scripts/openafs-eng-man.unconfigure
+ #verify scripts/openafs-eng-man.verify
+ #checkremove scripts/openafs-eng-man.checkremove
+ #preremove scripts/openafs-eng-man.preremove
+ #postremove scripts/openafs-eng-man.postremove
+ #control_file scripts/openafs-eng-man.subscript
+
+ # File definition(s):
+ #
+
+ file_permissions -u 222 -o bin -g bin
+ directory /usr/afs/man
+ directory /usr/afs/man/man1
+ directory ../../../src/man = /usr/afs/man/man1
+ file *
+
+ end # fileset
+ end # product
--- /dev/null
+#!/bin/sh
+##############
+# Product: OPENAFS
+# Fileset: OPENAFS.OPENAFS-CLNT
+# checkinstall
+# @(#) $Revision$
+##############
+#
+# (c) Copyright 2003
+#
+########
+
+# The global variables SUCCESS, FAILURE, WARNING, EXCLUDE, PATH, ROOT,
+# SW_CTL_SCRIPT_NAME, _pf, PRODUCT, and FILESET are all set by control_utils.
+
+set -a
+UTILS="/usr/lbin/sw/control_utils"
+if [[ ! -f ${UTILS} ]]
+then
+ echo "ERROR: Cannot find ${UTILS}"
+ exit 1
+fi
+. ${UTILS}
+
+exitval=$SUCCESS # Anticipate success
+
+############################################################################
+
+#
+# Check for running afsd processes, exit with a WARNING if running..
+# and SUCCESS if not running.
+#
+
+ps -ef | grep -v grep | grep afsd
+
+if [[ $? = 0 ]]; then
+ print "WARNING: afsd processes are running..."
+ print "The preinstall script will attempt to shut down afsd processes"
+ exitval=$WARNING
+else
+ print "NOTE: No afsd processes are running."
+ exitval=$SUCCESS
+fi
+
+exit $exitval
--- /dev/null
+#!/bin/sh
+##############
+# Product: OPENAFS
+# Fileset: OPENAFS.OPENAFS-CLNT
+# configure
+# @(#) $Revision$
+# @(#) $Revision$
+##############
+#
+# (c) Copyright 2003
+#
+########
+
+# The global variables SUCCESS, FAILURE, WARNING, EXCLUDE, PATH, ROOT,
+# SW_CTL_SCRIPT_NAME, _pf, PRODUCT, and FILESET are all set by control_utils.
+
+set -a
+UTILS="/usr/lbin/sw/control_utils"
+if [[ ! -f ${UTILS} ]]
+then
+ echo "ERROR: Cannot find ${UTILS}"
+ exit 1
+fi
+. ${UTILS}
+
+exitval=$SUCCESS # Anticipate success
+
+############################################################################
+#
+# Add cacheinfo info only if it does not locally exist
+#
+
+if [[ -d /usr/newconfig/usr/vice/etc && ! -f /usr/vice/etc/cacheinfo ]]; then
+
+ cp /usr/newconfig/usr/vice/etc/cacheinfo /usr/vice/etc
+ chmog 644 bin bin /usr/vice/etc/cacheinfo
+
+fi
+#
+# Add CellServDB info only if it does not locally exist
+#
+if [[ -f /usr/newconfig/usr/vice/etc/CellServDB && ! -f /usr/afs/etc/CellServDB ]]; then
+ print "Adding CellServDB hosts into /usr/afs/etc/CellServDB"
+ cat /usr/newconfig/usr/vice/etc/CellServDB >> /usr/afs/etc/CellServDB
+fi
+
+exit $exitval
--- /dev/null
+#!/bin/sh
+##############
+# Product: OPENAFS
+# Fileset: OPENAFS.OPENAFS-CLNT
+# preinstall
+# @(#) $Revision$
+##############
+#
+# (c) Copyright 2003
+#
+########
+
+# The global variables SUCCESS, FAILURE, WARNING, EXCLUDE, PATH, ROOT,
+# SW_CTL_SCRIPT_NAME, _pf, PRODUCT, and FILESET are all set by control_utils.
+
+set -a
+UTILS="/usr/lbin/sw/control_utils"
+if [[ ! -f ${UTILS} ]]
+then
+ echo "ERROR: Cannot find ${UTILS}"
+ exit 1
+fi
+. ${UTILS}
+
+exitval=$SUCCESS # Anticipate success
+
+############################################################################
+
+#
+# Shutdown the afsd process before upgrading. This is just cleaner, than
+# having SD move the file to #afsd because it's busy and adding it to
+# the cleanup file for removal on the next boot.
+#
+
+ps -ef | grep -v grep | grep afsd
+
+if [[ $? = 0 ]]; then
+ print "afsd process is running..attempting to shut down afsd process"
+ /usr/vice/etc/afsd -shutdown
+ if [[ $? = 0 ]]; then
+ print "Successfully shutdown the afsd processes."
+ exitval=$SUCCESS
+ else
+ print "Failed to successfully shutdown the afsd process."
+ exitval=$FAILURE
+ fi
+fi
+
+exit $exitval
--- /dev/null
+#!/bin/sh
+##############
+# Product: OPENAFS
+# Fileset: OPENAFS.OPENAFS-CLNT
+# preremove
+# @(#) $Revision$
+##############
+#
+# (c) Copyright 2003
+#
+########
+
+# The global variables SUCCESS, FAILURE, WARNING, EXCLUDE, PATH, ROOT,
+# SW_CTL_SCRIPT_NAME, _pf, PRODUCT, and FILESET are all set by control_utils.
+
+set -a
+UTILS="/usr/lbin/sw/control_utils"
+if [[ ! -f ${UTILS} ]]
+then
+ echo "ERROR: Cannot find ${UTILS}"
+ exit 1
+fi
+. ${UTILS}
+
+exitval=$SUCCESS # Anticipate success
+
+############################################################################
+
+#
+# Shutdown the afsd process
+#
+
+/usr/vice/etc/afsd -shutdown
+
+exit $exitval
--- /dev/null
+#!/bin/sh
+##############
+# Product: OPENAFS
+# Fileset: OPENAFS.OPENAFS-CLNT
+# unconfigure
+# @(#) $Revision$
+##############
+#
+# (c) Copyright 2003
+#
+########
+
+# The global variables SUCCESS, FAILURE, WARNING, EXCLUDE, PATH, ROOT,
+# SW_CTL_SCRIPT_NAME, _pf, PRODUCT, and FILESET are all set by control_utils.
+
+set -a
+UTILS="/usr/lbin/sw/control_utils"
+if [[ ! -f ${UTILS} ]]
+then
+ echo "ERROR: Cannot find ${UTILS}"
+ exit 1
+fi
+. ${UTILS}
+
+exitval=$SUCCESS # Anticipate success
+
+############################################################################
+
+
+
+exit $exitval
--- /dev/null
+#!/bin/sh
+
+echo "NOTE: Executing configure script."
+#######
+#
+# (c) Copyright
+#
+########
+
+ set -a
+ UTILS="/usr/lbin/sw/control_utils"
+ if [[ ! -f ${UTILS} ]]
+ then
+ echo "ERROR: Cannot find ${UTILS}"
+ exit 1
+ fi
+ . ${UTILS}
+
+############################################################################
+# Set the global PATH to include OPENAFS software
+ROOT=/usr/afs/
+
+mod_pathfile -a MP ${ROOT}man
+
+if [[ $? = 2 ]]
+then
+ echo " /etc/MANPATH already contains the OPENAFS component."
+else
+ echo "NOTE: Processes may need to be restarted to inherit"
+ echo " ${ROOT}/man in their PATH."
+fi
+
--- /dev/null
+#!/bin/sh
+
+echo "NOTE: Executing unconfigure script."
+#######
+#
+# (c) Copyright
+#
+########
+
+ set -a
+ UTILS="/usr/lbin/sw/control_utils"
+ if [[ ! -f ${UTILS} ]]
+ then
+ echo "ERROR: Cannot find ${UTILS}"
+ exit 1
+ fi
+ . ${UTILS}
+################################################
+# Remove the global MANPATH to exclude OPENAFS software
+ROOT=/opt/afs/
+
+mod_pathfile -d MP ${ROOT}man
+
+if [[ $? = 2 ]]
+then
+ echo " /etc/MANPATH does not contains the OPENAFS component."
+else
+ echo " ${ROOT}/man removed from /etc/MANPATH."
+fi
+
+exit 0
--- /dev/null
+#!/bin/sh
+##############
+# Subproduct: OPENAFS.Kernel
+# Fileset: OPENAFS-KRN32 | OPENAFS-KRN64
+# checkremove
+# @(#) $Revision: 1.2
+##############
+#
+# (c) Copyright Hewlett-Packard Company, 2003
+#
+########
+
+# The global variables SUCCESS, FAILURE, WARNING, EXCLUDE, PATH, ROOT,
+# SW_CTL_SCRIPT_NAME, _pf, PRODUCT, and FILESET are all set by control_utils.
+
+UTILS=/usr/lbin/sw/control_utils
+if [[ ! -f $UTILS ]]
+then
+ print "ERROR: Cannot find the sh functions library $UTILS."
+ exit 1
+fi
+
+. $UTILS
+
+if [[ $SW_SESSION_IS_KERNEL = "TRUE" ]]; then
+
+ # Test here for afs filesystems before removing
+ # Write stdout to a file
+ # We really aren't testing, this script is provided as an example
+
+ if [ -s /tmp/afsfilesystem ] ; then
+ echo "ERROR: AFS filesystems still exist on the system. In order to"
+ echo " remove the $FILESET fileset, you must remove the "
+ echo " afs filesystems and re-execute the swremove command."
+ exit $FAILURE
+ fi
+ exit $SUCCESS
+fi
+
--- /dev/null
+#!/bin/sh
+##############
+# Subproduct: OPENAFS.Kernel
+# Fileset: OPENAFS-KRN32 | OPENAFS-KRN64
+# configure
+# @(#) $Revision$
+##############
+#
+# (c) Copyright 2003
+#
+########
+
+# The global variables SUCCESS, FAILURE, WARNING, EXCLUDE, PATH, ROOT,
+# SW_CTL_SCRIPT_NAME, _pf, PRODUCT, and FILESET are all set by control_utils.
+
+set -a
+UTILS="/usr/lbin/sw/control_utils"
+if [[ ! -f ${UTILS} ]]
+then
+ echo "ERROR: Cannot find ${UTILS}"
+ exit 1
+fi
+. ${UTILS}
+
+exitval=$SUCCESS # Anticipate success
+
+############################################################################
+
+#
+# Check for alternate root installation
+#
+if [[ -n "${SW_DEFERRED_KERNBLD}" ]]
+then
+
+ ##########################################
+ # #
+ # Place afs driver into /stand/system #
+ # #
+ ##########################################
+
+ mod_systemfile $SW_SYSTEM_FILE_PATH -a afs
+ if [[ $? -ne 0 ]]
+ then
+ print "ERROR: Cannot update $SW_SYSTEM_FILE_PATH to"
+ print " include afs ($FILESET functionality)."
+ exitval=$FAILURE
+ fi
+fi
+
+exit $exitval
--- /dev/null
+#!/bin/sh
+##############
+# Subproduct: OPENAFS.Kernel
+# Fileset: OPENAFS-KRN32 | OPENAFS-KRN64
+# postinstall
+# @(#) $Revision$
+##############
+#
+# (c) Copyright 2003
+#
+########
+
+# The global variables SUCCESS, FAILURE, WARNING, EXCLUDE, PATH, ROOT,
+# SW_CTL_SCRIPT_NAME, _pf, PRODUCT, and FILESET are all set by control_utils.
+
+set -a
+UTILS="/usr/lbin/sw/control_utils"
+if [[ ! -f ${UTILS} ]]
+then
+ echo "ERROR: Cannot find ${UTILS}"
+ exit 1
+fi
+. ${UTILS}
+
+exitval=$SUCCESS # Anticipate success
+
+############################################################################
+
+# This check modifies only /stand on the root file system
+
+if [[ -z "${SW_DEFERRED_KERNBLD}" ]]
+then
+
+ ##########################################
+ # #
+ # Place afs driver into /stand/system #
+ # #
+ ##########################################
+
+ mod_systemfile $SW_SYSTEM_FILE_PATH -a afs
+ if [[ $? -ne 0 ]]
+ then
+ print "ERROR: Cannot update $SW_SYSTEM_FILE_PATH to"
+ print " include afs ($FILESET functionality)."
+ exitval=$FAILURE
+ fi
+fi
+
+exit $exitval
--- /dev/null
+#!/bin/sh
+##############
+# Subproduct: OPENAFS.Kernel
+# Fileset: OPENAFS-KRN32 | OPENAFS-KRN64
+# configure
+# @(#) $Revision$
+##############
+#
+# (c) Copyright 2003
+#
+########
+
+# The global variables SUCCESS, FAILURE, WARNING, EXCLUDE, PATH, ROOT,
+# SW_CTL_SCRIPT_NAME, _pf, PRODUCT, and FILESET are all set by control_utils.
+
+set -a
+UTILS="/usr/lbin/sw/control_utils"
+if [[ ! -f ${UTILS} ]]
+then
+ echo "ERROR: Cannot find ${UTILS}"
+ exit 1
+fi
+. ${UTILS}
+
+exitval=$SUCCESS # Anticipate success
+
+############################################################################
+
+
+ ##########################################
+ # #
+ # Delete driver from /stand/system #
+ # #
+ ##########################################
+
+ mod_systemfile $SW_SYSTEM_FILE_PATH -d afs
+ if [[ $? -ne 0 ]]
+ then
+ print "ERROR: Cannot update $SW_SYSTEM_FILE_PATH to"
+ print " remove afs ($FILESET functionality)."
+ exitval=$FAILURE
+ fi
+
+exit $exitval
--- /dev/null
+#!/bin/sh
+##############
+# Subproduct: OPENAFS.Kernel
+# Fileset: OPENAFS-KRN32 | OPENAFS-KRN64
+# verify
+# @(#) $Revision: 1.2
+##############
+#
+# (c) Copyright Hewlett-Packard Company, 2003
+#
+########
+
+# The global variables SUCCESS, FAILURE, WARNING, EXCLUDE, PATH, ROOT,
+# SW_CTL_SCRIPT_NAME, _pf, PRODUCT, and FILESET are all set by control_utils.
+
+UTILS=/usr/lbin/sw/control_utils
+if [[ ! -f $UTILS ]]
+then
+ print "ERROR: Cannot find the sh functions library $UTILS."
+ exit 1
+fi
+. $UTILS
+
+TEMP=/tmp/kern-verify.$$
+
+trap "/usr/bin/rm -f $TEMP" HUP INT QUIT TERM ABRT EXIT
+
+kernel="$(get_kernel_path)"
+
+/usr/lbin/sysadm/get_sysfile ${kernel} >| $TEMP
+if [[ ! -s "$TEMP" ]]
+then
+ print "ERROR: The get_sysfile tool failed on ${kernel}."
+ exit $FAILURE
+fi
+
+for driver in afs
+do
+ /usr/bin/grep "^${driver}\$" $TEMP >/dev/null 2>&1
+ if [[ $? -ne 0 ]]
+ then
+ print "WARNING: The \"${driver}\" functionality is not configured in the"
+ print " kernel (${kernel})."
+ print " The $FILESET fileset is not properly installed."
+ exit $WARNING
+ fi
+done
+
+#
+# Finished
+#
+
+exit $exitval
--- /dev/null
+#!/bin/sh
+##############
+# Product: OPENAFS
+# Fileset: OPENAFS.OPENAFS-SRV
+# configure
+# @(#) $Revision$
+# @(#) $Revision$
+##############
+#
+# (c) Copyright 2003
+#
+########
+
+# The global variables SUCCESS, FAILURE, WARNING, EXCLUDE, PATH, ROOT,
+# SW_CTL_SCRIPT_NAME, _pf, PRODUCT, and FILESET are all set by control_utils.
+
+set -a
+UTILS="/usr/lbin/sw/control_utils"
+if [[ ! -f ${UTILS} ]]
+then
+ echo "ERROR: Cannot find ${UTILS}"
+ exit 1
+fi
+. ${UTILS}
+
+exitval=$SUCCESS # Anticipate success
+
+############################################################################
+
+
+
+if [[ -f /sbin/lib/mfsconfig.d/afs ]]; then
+ print "File /sbin/lib/mfsconfig.d/afs already exists"
+else
+ print "Creating file /sbin/lib/mfsconfig.d/afs"
+ print "format_revision 1" > /sbin/lib/mfsconfig.d/afs
+ print "fsck 0 m,P,p,d,f,b:c:y,n,Y,N,q," \
+ >> /sbin/lib/mfsconfig.d/afs
+ chmog 444 bin bin /sbin/lib/mfsconfig.d/afs
+fi
+#
+# Add /sbin/lib/mfsconfig.d/afs to the IPD so it will be removed
+# upon removal of the fileset
+
+print "Adding file /sbin/lib/mfsconfig.d/afs to the OPENAFS.OPENAFS-SRV fileset"
+swmodify -x files=/sbin/lib/mfsconfig.d/afs OPENAFS.OPENAFS-SRV
+
+exit $exitval
--- /dev/null
+#!/bin/sh
+##############
+# Product: OPENAFS
+# Fileset: OPENAFS.OPENAFS-SRV
+# postremove
+# @(#) $Revision$
+##############
+#
+# (c) Copyright 2003
+#
+########
+
+# The global variables SUCCESS, FAILURE, WARNING, EXCLUDE, PATH, ROOT,
+# SW_CTL_SCRIPT_NAME, _pf, PRODUCT, and FILESET are all set by control_utils.
+
+set -a
+UTILS="/usr/lbin/sw/control_utils"
+if [[ ! -f ${UTILS} ]]
+then
+ echo "ERROR: Cannot find ${UTILS}"
+ exit 1
+fi
+. ${UTILS}
+
+exitval=$SUCCESS # Anticipate success
+
+############################################################################
+
+#
+# After the removal of the server, we remove all the files and
+# directories associated
+# with the server (which was created with the bosserver)
+
+RMDIRS="/usr/afs/db \
+ /usr/afs/local \
+ /usr/afs/etc/ThisCell \
+ /usr/afs/etc/CellServDB \
+ /usr/afs/logs"
+
+for dir in $RMDIRS
+do
+ if [[ -d $dir ]]; then
+ print "Removing directory $dir"
+ rm -fr $dir
+ fi
+done
+
+exit $exitval
--- /dev/null
+#!/bin/sh
+##############
+# Product: OPENAFS
+# Fileset: OPENAFS.OPENAFS-SRV
+# preinstall
+# @(#) $Revision$
+##############
+#
+# (c) Copyright 2003
+#
+########
+
+# The global variables SUCCESS, FAILURE, WARNING, EXCLUDE, PATH, ROOT,
+# SW_CTL_SCRIPT_NAME, _pf, PRODUCT, and FILESET are all set by control_utils.
+
+set -a
+UTILS="/usr/lbin/sw/control_utils"
+if [[ ! -f ${UTILS} ]]
+then
+ echo "ERROR: Cannot find ${UTILS}"
+ exit 1
+fi
+. ${UTILS}
+
+exitval=$SUCCESS # Anticipate success
+
+############################################################################
+
+#
+# Assume this system is an AFS server
+# Shutdown before upgrading.
+#
+SERVER=`/usr/bin/hostname`
+
+if [[ -f /usr/afs/bin/bosserver ]]; then
+ /usr/afs/bin/bos shutdown $SERVER -localauth
+fi
+#
+# The bosserver is still running, kill it
+#
+kill_named_procs bosserver SIGTERM
+
+exit $exitval
--- /dev/null
+#!/bin/sh
+##############
+# Product: OPENAFS
+# Fileset: OPENAFS.OPENAFS-SRV
+# preremove
+# @(#) $Revision$
+##############
+#
+# (c) Copyright 2003
+#
+########
+
+# The global variables SUCCESS, FAILURE, WARNING, EXCLUDE, PATH, ROOT,
+# SW_CTL_SCRIPT_NAME, _pf, PRODUCT, and FILESET are all set by control_utils.
+
+set -a
+UTILS="/usr/lbin/sw/control_utils"
+if [[ ! -f ${UTILS} ]]
+then
+ echo "ERROR: Cannot find ${UTILS}"
+ exit 1
+fi
+. ${UTILS}
+
+exitval=$SUCCESS # Anticipate success
+
+############################################################################
+
+#
+# Assume this system is an AFS server
+#
+SERVER=`/usr/bin/hostname`
+
+if [[ -f /usr/afs/bin/bosserver ]]; then
+ /usr/afs/bin/bos shutdown $SERVER -localauth
+fi
+#
+# The bosserver is still running, kill it
+#
+kill_named_procs bosserver SIGTERM
+
+exit $exitval
--- /dev/null
+#!/bin/sh
+##############
+# Product: OPENAFS
+# Fileset: OPENAFS.OPENAFS-SRV
+# configure
+# @(#) $Revision$
+# @(#) $Revision$
+##############
+#
+# (c) Copyright 2003
+#
+########
+
+# The global variables SUCCESS, FAILURE, WARNING, EXCLUDE, PATH, ROOT,
+# SW_CTL_SCRIPT_NAME, _pf, PRODUCT, and FILESET are all set by control_utils.
+
+set -a
+UTILS="/usr/lbin/sw/control_utils"
+if [[ ! -f ${UTILS} ]]
+then
+ echo "ERROR: Cannot find ${UTILS}"
+ exit 1
+fi
+. ${UTILS}
+
+exitval=$SUCCESS # Anticipate success
+
+############################################################################
+
+#
+# Removal of /sbin/lib/mfsconfig.d/afs is done automatically
+# since we add it to the IPD in the configure script.
+
+exit $exitval
--- /dev/null
+#!/bin/sh
+
+echo "NOTE: Executing configure script."
+#######
+#
+# (c) Copyright Hewlett-Packard Company 1994
+#
+########
+
+ set -a
+ UTILS="/usr/lbin/sw/control_utils"
+ if [[ ! -f ${UTILS} ]]
+ then
+ echo "ERROR: Cannot find ${UTILS}"
+ exit 1
+ fi
+ . ${UTILS}
+
+############################################################################
+# Set the global PATH to include OPENAFS software
+ROOT=/usr/afs/
+mod_pathfile -a P ${ROOT}bin
+
+if [[ $? = 2 ]]
+then
+ echo " /etc/PATH already contains the OPENAFS component."
+else
+ echo "NOTE: Processes may need to be restarted to inherit"
+ echo " ${ROOT}/bin in their PATH."
+fi
+
+if [[ -f /usr/newconfig/sbin/init.d/afs ]]; then
+
+ # Copy from the original to /sbin/init.d
+
+ cp /usr/newconfig/sbin/init.d/afs /sbin/init.d
+ chmog 555 bin bin /sbin/init.d/afs
+
+ # Insert the sym links for startup and shutdown
+ # Assume possible upgrade! if the link is there, don't relink
+ #
+ if [[ ! -h /sbin/rc2.d/K800afs ]]; then
+ ln -s /sbin/init.d/afs /sbin/rc2.d/K800afs
+ fi
+ if [[ ! -h /sbin/rc2.d/S460afs ]]; then
+ ln -s /sbin/init.d/afs /sbin/rc2.d/S460afs
+ fi
+
+fi
--- /dev/null
+#!/bin/sh
+
+echo "NOTE: Executing configure script."
+#######
+#
+# (c) Copyright Hewlett-Packard Company 1994
+#
+########
+
+ set -a
+ UTILS="/usr/lbin/sw/control_utils"
+ if [[ ! -f ${UTILS} ]]
+ then
+ echo "ERROR: Cannot find ${UTILS}"
+ exit 1
+ fi
+ . ${UTILS}
+
+############################################################################
+# Removing the OPENOAFS product means cleanup everything!
+
+# Kill ruthlessly..
+
+PROCS="bosserver fileserver volserver buserver ptserver kaserver vlserver \
+ upserver upclient"
+
+for proc in $PROCS
+do
+ kill_named_procs $proc SIGKILL
+done
+
+
+rm -fr /usr/vice
+if [[ $? != 0 ]]
+ print " Could not remove the /usr/vice directory, adding it to the"
+ print " cleanup file"
+ print "/usr/vice" >> /var/adm/cleanupfile
+fi
+rm -fr /usr/afs
+if [[ $? != 0 ]]
+ print " Could not remove the /usr/afs directory, adding it to the"
+ print " cleanup file"
+ print "/usr/afs" >> /var/adm/cleanupfile
+fi
+
+
--- /dev/null
+#!/bin/sh
+
+echo "NOTE: Executing unconfigure script."
+#######
+#
+# (c) Copyright Hewlett-Packard Company 1994
+# @(#) OpenAFS unconfigure v1.2 4/22/03
+########
+
+ set -a
+ UTILS="/usr/lbin/sw/control_utils"
+ if [[ ! -f ${UTILS} ]]
+ then
+ echo "ERROR: Cannot find ${UTILS}"
+ exit 1
+ fi
+ . ${UTILS}
+#
+# Anticipate SUCCESS
+exitval=$SUCCESS
+
+################################################
+# Set the global PATH to include OPENAFS software
+ROOT=/opt/afs/
+mod_pathfile -d P ${ROOT}bin
+
+if [[ $? = 2 ]]
+then
+ echo " $ROOT already removed from /etc/PATH."
+else
+ echo " ${ROOT}/bin removed from path"
+fi
+
+# Remove the startup/shutdown scripts from /sbin/init.d and /sbin/rc2.d
+# Remove the configuration files inserted by the configure script
+
+RMFILES="/usr/vice/etc/AFSlog \
+ /usr/vice/etc/CellServDB \
+ /usr/vice/etc/ThisCell \
+ /usr/vice/etc/cacheinfo \
+ /sbin/rc2.d/K800afs \
+ /sbin/rc2.d/S460afs \
+ /sbin/init.d/afs"
+
+for file in $RMFILES
+do
+ if [[ -f $file ]];then
+ print "Removing file $file"
+ rm $file
+ fi
+done
+
+exit $exitval
--- /dev/null
+>grand.central.org #GCO Public CellServDB 10 Apr 2002
+18.7.14.88 #grand-opening.mit.edu
+128.2.191.224 #penn.central.org
+>wu-wien.ac.at #University of Economics, Vienna, Austria
+137.208.3.33 #afsdb1.wu-wien.ac.at
+137.208.7.4 #afsdb2.wu-wien.ac.at
+137.208.7.7 #afsdb3.wu-wien.ac.at
+>cern.ch #European Laboratory for Particle Physics, Geneva
+137.138.128.148 #afsdb1.cern.ch
+137.138.246.50 #afsdb3.cern.ch
+137.138.246.51 #afsdb2.cern.ch
+>ethz.ch #Swiss Federal Inst. of Tech. - Zurich, Switzerland
+129.132.97.19 #amalthea.ethz.ch
+129.132.97.27 #nethzafs-001.ethz.ch
+129.132.115.3 #himalia.ethz.ch
+129.132.115.37 #nethzafs-005.ethz.ch
+129.132.115.38 #nethzafs-006.ethz.ch
+>extundo.com #Simon Josefsson's cell
+195.42.214.241 #slipsten.extundo.com
+>mekinok.com #Mekinok, Inc.
+4.17.166.66 #loggerhead.mekinok.com
+>sodre.cx #Sodre.cx
+128.8.140.165 #greed.sodre.cx
+>ipp-garching.mpg.de #Institut fuer Plasmaphysik
+130.183.9.5 #afs-db1.rzg.mpg.de
+130.183.100.10 #afs-db2.aug.ipp-garching.mpg.de
+130.183.100.23 #afs-db3.aug.ipp-garching.mpg.de
+>tu-chemnitz.de #Technische Universitaet Chemnitz, Germany
+134.109.2.1 #zuse.hrz.tu-chemnitz.de
+134.109.2.15 #phoenix.hrz.tu-chemnitz.de
+134.109.200.7 #aetius.hrz.tu-chemnitz.de
+>uni-bonn.de #Cell name
+131.220.14.198 #work15-eth.rhrz.uni-bonn.de
+131.220.14.203 #node03-en2.rhrz.uni-bonn.de
+131.220.14.205 #node05.rhrz.uni-bonn.de
+>uni-freiburg.de #Albert-Ludwigs-Universitat Freiburg
+132.230.6.235 #sv6.ruf.uni-freiburg.de
+132.230.6.236 #sv7.ruf.uni-freiburg.de
+132.230.6.237 #sv8.ruf.uni-freiburg.de
+>uni-hohenheim.de #University of Hohenheim
+144.41.2.2 #rs13.serv.uni-hohenheim.de
+144.41.2.3 #rs14.serv.uni-hohenheim.de
+144.41.2.4 #rs15.serv.uni-hohenheim.de
+>meteo.uni-koeln.de #Univ. of Cologne - Inst. for Geophysics & Meteorology
+134.95.144.200 #bora.meteo.uni-koeln.de
+134.95.144.208 #monsun.meteo.uni-koeln.de
+134.95.144.213 #brise.meteo.uni-koeln.de
+>sunsite.dk #SunSITE.dk
+130.225.51.30 #sunsite.dk
+>andrew.cmu.edu #Carnegie Mellon University - Computing Services
+128.2.10.2 #vice2.fs.andrew.cmu.edu
+128.2.10.7 #vice7.fs.andrew.cmu.edu
+128.2.10.11 #vice11.fs.andrew.cmu.edu
+128.2.10.12 #vice12.fs.andrew.cmu.edu
+128.2.10.28 #vice28.fs.andrew.cmu.edu
+>club.cc.cmu.edu #Carnegie Mellon University Computer Club
+128.2.4.131 #yttrium.club.cc.cmu.edu
+128.2.4.132 #zirconium.club.cc.cmu.edu
+>cs.cmu.edu #Carnegie Mellon University - School of Comp. Sci.
+128.2.206.130 #cucumber.srv.cs.cmu.edu
+128.2.222.199 #papaya.srv.cs.cmu.edu
+128.2.242.86 #lemon.srv.cs.cmu.edu
+>ece.cmu.edu #Carnegie Mellon University - Elec. Comp. Eng. Dept.
+128.2.129.7 #porok.ece.cmu.edu
+128.2.129.8 #vicio.ece.cmu.edu
+128.2.129.9 #e-xing.ece.cmu.edu
+128.2.136.109 #last.ece.cmu.edu
+>msc.cornell.edu #Cornell University Materials Science Center
+128.84.231.242 #miranda.ccmr.cornell.edu
+128.84.241.35 #co.ccmr.cornell.edu
+128.84.249.78 #dax.ccmr.cornell.edu
+>iastate.edu #Iowa State University
+129.186.1.243 #afsdb-1.iastate.edu
+129.186.6.243 #afsdb-2.iastate.edu
+129.186.142.243 #afsdb-3.iastate.edu
+>athena.mit.edu #MIT/Athena cell
+18.7.1.66 #paris.mit.edu.
+18.145.0.25 #agamemnon.mit.edu.
+18.158.0.37 #prill.mit.edu.
+>dev.mit.edu #MIT/IS Development cell
+18.7.1.70 #wham.mit.edu.
+18.7.15.89 #rattle.mit.edu.
+18.7.15.93 #hum.mit.edu.
+>net.mit.edu #MIT/Network Group cell
+18.72.0.26 #cetus.mit.edu.
+18.72.1.38 #gracie.mit.edu.
+>sipb.mit.edu #MIT/SIPB cell
+18.181.0.19 #reynelda.mit.edu.
+18.181.0.22 #rosebud.mit.edu.
+18.181.0.23 #ronald-ann.mit.edu.
+>msu.edu #Michigan State University Main Cell
+35.9.7.10 #afsdb0.cl.msu.edu
+>nd.edu #University of Notre Dame
+129.74.223.17 #john.helios.nd.edu
+129.74.223.33 #lizardo.helios.nd.edu
+129.74.223.65 #buckaroo.helios.nd.edu
+>pitt.edu #University of Pittsburgh
+136.142.8.15 #afs09.srv.cis.pitt.edu
+136.142.8.20 #afs10.srv.cis.pitt.edu
+136.142.8.21 #afs11.srv.cis.pitt.edu
+>rose-hulman.edu #Rose-Hulman Institute of Technology
+137.112.7.11 #afs1.rose-hulman.edu
+137.112.7.12 #afs2.rose-hulman.edu
+137.112.7.13 #afs3.rose-hulman.edu
+>cs.rose-hulman.edu #Rose-Hulman CS Department
+137.112.40.10 #galaxy.cs.rose-hulman.edu
+>rpi.edu #Rensselaer Polytechnic Institute
+128.113.22.11 #saul.server.rpi.edu
+128.113.22.12 #joab.server.rpi.edu
+128.113.22.13 #korah.server.rpi.edu
+128.113.22.14 #achan.server.rpi.edu
+>hep.sc.edu #USC HEP cell
+129.252.78.77 #cpeven.physics.sc.edu
+129.252.78.79 #redbaron.physics.sc.edu
+>ir.stanford.edu #Stanford University
+171.64.7.222 #afsdb1.stanford.edu
+171.64.7.234 #afsdb2.stanford.edu
+171.64.7.246 #afsdb3.stanford.edu
+>slac.stanford.edu #Stanford Linear Accelerator Center
+134.79.18.25 #afsdb1.slac.stanford.edu
+134.79.18.26 #afsdb2.slac.stanford.edu
+134.79.18.27 #afsdb3.slac.stanford.edu
+>cats.ucsc.edu #UC Santa Cruz, Comm. and Tech. Services, California U.S.A
+128.114.129.14 #elan.ucsc.edu
+128.114.129.15 #ichabod.ucsc.edu
+128.114.129.18 #maneki.ucsc.edu
+>ncsa.uiuc.edu #University of Illinois
+141.142.3.5 #congo.ncsa.uiuc.edu
+141.142.3.8 #nile.ncsa.uiuc.edu
+141.142.230.19 #jinx.ncsa.uiuc.edu
+>umbc.edu #University of Maryland, Baltimore County
+130.85.1.13 #db2.afs.umbc.edu
+130.85.6.33 #db1.afs.umbc.edu
+130.85.60.12 #db3.afs.umbc.edu
+>glue.umd.edu #University of Maryland - Project Glue
+128.8.10.44 #tin.umd.edu
+128.8.10.126 #iron.umd.edu
+128.8.70.10 #copper.umd.edu
+>wam.umd.edu #University of Maryland Network WAM Project
+128.8.70.9 #csc-srv.wam.umd.edu
+128.8.73.9 #pg2-srv.wam.umd.edu
+129.2.128.54 #avw-srv.wam.umd.edu
+>umich.edu #University of Michigan - Campus
+141.211.1.32 #fear.ifs.umich.edu
+141.211.1.33 #surprise.ifs.umich.edu
+141.211.1.34 #ruthless.ifs.umich.edu
+>citi.umich.edu #University of Michigan - CITI
+141.211.92.144 #babble.citi.umich.edu
+>lsa.umich.edu #University of Michigan - College of LS&A
+141.211.54.132 #curtis.admin.lsa.umich.edu
+141.211.61.23 #zee.admin.lsa.umich.edu
+141.211.68.15 #marshall.lsa.umich.edu
+>math.lsa.umich.edu #University of Michigan - Math Department
+141.211.61.40 #ike.math.lsa.umich.edu
+141.211.61.41 #clark.math.lsa.umich.edu
+141.211.61.42 #nimitz.math.lsa.umich.edu
+>umr.edu #University of Missouri - Rolla
+131.151.1.59 #afs1.umr.edu
+131.151.1.70 #afs6.umr.edu
+131.151.1.146 #afs5.umr.edu
+>eng.utah.edu #University of Utah - Engineering
+155.99.222.40 #afs1.eng.utah.edu
+155.99.222.41 #afs2.eng.utah.edu
+>cs.uwm.edu #University of Wisconsin--Milwaukee
+129.89.38.124 #solomons.cs.uwm.edu
+>cs.wisc.edu #Univ. of Wisconsin-Madison, Computer Sciences Dept.
+128.105.132.14 #timon.cs.wisc.edu
+128.105.132.15 #pumbaa.cs.wisc.edu
+128.105.132.16 #zazu.cs.wisc.edu
+>hep.wisc.edu #University of Wisconsin -- High Energy Physics
+128.104.28.219 #anise.physics.wisc.edu
+>biocenter.helsinki.fi #University of Helsinki, Institute of Biotechnology
+128.214.58.174 #afsdb1.biocenter.helsinki.fi
+128.214.88.114 #afsdb2.biocenter.helsinki.fi
+>in2p3.fr #IN2P3 production cell
+134.158.232.11 #ccafsdb1.in2p3.fr
+134.158.232.12 #ccafsdb2.in2p3.fr
+134.158.232.13 #ccafsdb3.in2p3.fr
+>anl.gov #Argonne National Laboratory
+146.137.96.33 #arteus.ctd.anl.gov
+146.137.162.88 #agamemnon.ctd.anl.gov
+146.137.194.80 #antenor.ctd.anl.gov
+>usatlas.bnl.gov #US Atlas Tier 1 Facility at BNL
+130.199.48.32 #aafs01.usatlas.bnl.gov
+130.199.48.33 #aafs02.usatlas.bnl.gov
+130.199.48.34 #aafs03.usatlas.bnl.gov
+>fnal.gov #Fermi National Acclerator Laboratory
+131.225.68.1 #fsus01.fnal.gov
+131.225.68.4 #fsus03.fnal.gov
+131.225.68.14 #fsus04.fnal.gov
+>ictp.trieste.it #The Abdus Salam International Centre for Theoretical Physics (IC
+140.105.16.8 #fs1.ictp.trieste.it
+140.105.16.9 #fs2.ictp.trieste.it
+>cmf.nrl.navy.mil #Naval Research Lab - CCS
+134.207.10.68 #picard.cmf.nrl.navy.mil
+134.207.10.69 #riker.cmf.nrl.navy.mil
+134.207.10.70 #kirk.cmf.nrl.navy.mil
+>lcp.nrl.navy.mil #Naval Research Lab - Lab for Computational Physics
+132.250.114.2 #afs1.lcp.nrl.navy.mil
+132.250.114.4 #afs2.lcp.nrl.navy.mil
+132.250.114.6 #afs3.lcp.nrl.navy.mil
+>es.net #Energy Sciences Net
+198.128.3.21 #fs1.es.net
+198.128.3.22 #fs2.es.net
+198.128.3.23 #fs3.es.net
+>zepa.net #Kolya/zepa.net cell
+205.245.53.21 #perseus.zepa.net.
+205.245.53.48 #neptune.zepa.net.
+>nikhef.nl #The Dutch National Institute for High Energy Physics
+192.16.185.26 #afs1.nikhef.nl
+192.16.185.27 #afs2.nikhef.nl
+>1ts.org #KCR/private Karl Ramm, Cambridge, MA
+4.36.43.102 #dol-guldur.1ts.org
+>dementia.org #Dementia Unlimited
+128.2.12.45 #alycia.dementia.org
+128.2.120.216 #meredith.dementia.org
+>nimlabs.org #Nimlabs, Ink. Cell.
+18.238.1.103 #olfin.nimlabs.org
+18.238.1.105 #caerbanog.nimlabs.org
+>openafs.org #OpenAFS
+128.2.121.218 #virtue.openafs.org
+>rhic #Relativistic Heavy Ion Collider
+130.199.6.51 #rafs03.rcf.bnl.gov
+130.199.6.52 #rafs02.rcf.bnl.gov
+130.199.6.69 #rafs01.rcf.bnl.gov
+>dynarc.se #Dynarc
+62.65.1.17 #adder.dynarc.se
+>isk.kth.se #Royal Institute of Technology, ISK
+130.237.202.12 #afsdb2.isk.kth.se
+130.237.206.13 #afsdb1.isk.kth.se
+130.237.209.141 #afsdb3.isk.kth.se
+>phy.bris.ac.uk #Bristol University - phyics
+137.222.58.9 #afs1.phy.bris.ac.uk
+>hep.man.ac.uk #Manchester HEP
+194.36.2.3 #afs1.hep.man.ac.uk
+>rl.ac.uk #Rutherford Appleton Lab, England
+130.246.12.45 #isabel.cc.rl.ac.uk
+130.246.15.135 #tinkerbel.cc.rl.ac.uk
+130.246.183.164 #wallace.cc.rl.ac.uk
--- /dev/null
+Following are the md5 hashes of all the cellservdb's shipped with
+macos x openafs releases prior to 1.2.7. No newer files need to be
+added to this file, since the way CellServDB files are managed changed
+in 1.2.7
+MD5 (1.0.4/CellServDB) = 4ac0ebd85f6790cdd64d61ff85e5a3f7
+MD5 (1.1.0/CellServDB) = 122a61939725a7b7175ab79816cf4ebf
+MD5 (1.1.1/CellServDB) = 122a61939725a7b7175ab79816cf4ebf
+MD5 (1.2.0/CellServDB) = 122a61939725a7b7175ab79816cf4ebf
+MD5 (1.2.1/CellServDB) = 122a61939725a7b7175ab79816cf4ebf
+MD5 (1.2.2a/CellServDB) = f19fe18f0f4fc3910a0354bfd479b217
+MD5 (1.2.3/CellServDB) = f19fe18f0f4fc3910a0354bfd479b217
+MD5 (1.2.4/CellServDB) = ad94cdff3fcfbd1763099032dd3a0c84
+MD5 (1.2.5/CellServDB) = ad94cdff3fcfbd1763099032dd3a0c84
+MD5 (1.2.6/CellServDB) = 66ad76e99c0f88a7e113c1ccce83819a
--- /dev/null
+{\rtf1\mac\ansicpg10000\cocoartf100
+{\fonttbl\f0\fswiss\fcharset77 Helvetica;\f1\fnil\fcharset77 HelveticaNeue-CondensedBlack;\f2\fswiss\fcharset77 ArialMT;
+}
+{\colortbl;\red255\green255\blue255;}
+\margl1440\margr1440\vieww10620\viewh8860\viewkind0
+\pard\tx1440\tx2880\tx4320\tx5760\tx7200\ql\qnatural
+
+\f0\fs20 \cf0 IBM Public License Version 1.0\
+ \
+
+\f1 THE ACCOMPANYING PROGRAM IS PROVIDED UNDER THE TERMS OF THIS IBM\
+ PUBLIC LICENSE ("AGREEMENT"). ANY USE, REPRODUCTION OR DISTRIBUTION OF\
+ THE PROGRAM CONSTITUTES RECIPIENT'S ACCEPTANCE OF THIS AGREEMENT.\
+
+\f0\fs16 \
+
+\fs20 1. DEFINITIONS\
+ \
+ "Contribution" means:\
+ a) in the case of International Business Machines Corporation ("IBM"),\
+ the Original Program, and\
+ \
+ b) in the case of each Contributor,\
+ \
+ i) changes to the Program, and\
+ \
+ ii) additions to the Program;\
+ \
+ where such changes and/or additions to the Program originate from and\
+ are distributed by that particular Contributor. A Contribution\
+ 'originates' from a Contributor if it was added to the Program by\
+ such Contributor itself or anyone acting on such Contributor's\
+ behalf. Contributions do not include additions to the Program\
+ which: (i) are separate modules of software distributed in\
+ conjunction with the Program under their own license agreement,\
+ and (ii) are not derivative works of the Program.\
+ \
+ "Contributor" means IBM and any other entity that distributes the\
+ Program.\
+ \
+ "Licensed Patents " mean patent claims licensable by a Contributor\
+ which are necessarily infringed by the use or sale of its Contribution\
+ alone or when combined with the Program.\
+ \
+ "Original Program" means the original version of the software\
+ accompanying this Agreement as released by IBM, including source code,\
+ object code and documentation, if any.\
+ \
+ "Program" means the Original Program and Contributions.\
+ \
+ "Recipient" means anyone who receives the Program under this\
+ Agreement, including all Contributors.\
+ \
+ 2. GRANT OF RIGHTS\
+ a) Subject to the terms of this Agreement, each Contributor hereby\
+ grants Recipient a non-exclusive, worldwide, royalty-free\
+ copyright license to reproduce, prepare derivative works of,\
+ publicly display, publicly perform, distribute and sublicense the\
+ Contribution of such Contributor, if any, and such derivative\
+ works, in source code and object code form.\
+ \
+ b) Subject to the terms of this Agreement, each Contributor hereby\
+ grants Recipient a non-exclusive, worldwide, royalty-free patent\
+ license under Licensed Patents to make, use, sell, offer to sell,\
+ import and otherwise transfer the Contribution of such\
+ Contributor, if any, in source code and object code form. This\
+ patent license shall apply to the combination of the Contribution\
+ and the Program if, at the time the Contribution is added by the\
+ Contributor, such addition of the Contribution causes such\
+ combination to be covered by the Licensed Patents. The patent\
+ license shall not apply to any other combinations which include\
+ the Contribution. No hardware per se is licensed hereunder.\
+ \
+ c) Recipient understands that although each Contributor grants the\
+ licenses to its Contributions set forth herein, no assurances are\
+ provided by any Contributor that the Program does not infringe the\
+ patent or other intellectual property rights of any other entity.\
+ Each Contributor disclaims any liability to Recipient for claims\
+ brought by any other entity based on infringement of intellectual\
+ property rights or otherwise. As a condition to exercising the\
+ rights and licenses granted hereunder, each Recipient hereby\
+ assumes sole responsibility to secure any other intellectual\
+ property rights needed, if any. For example, if a third party\
+ patent license is required to allow Recipient to distribute the\
+ Program, it is Recipient's responsibility to acquire that license\
+ before distributing the Program.\
+ \
+ d) Each Contributor represents that to its knowledge it has sufficient\
+ copyright rights in its Contribution, if any, to grant the\
+ copyright license set forth in this Agreement.\
+ \
+ 3. REQUIREMENTS\
+ \
+ A Contributor may choose to distribute the Program in object code form\
+ under its own license agreement, provided that:\
+ a) it complies with the terms and conditions of this Agreement; and\
+ \
+ b) its license agreement:\
+ \
+ i) effectively disclaims on behalf of all Contributors all warranties\
+ and conditions, express and implied, including warranties or\
+ conditions of title and non-infringement, and implied warranties\
+ or conditions of merchantability and fitness for a particular\
+ purpose;\
+ \
+ ii) effectively excludes on behalf of all Contributors all liability\
+ for damages, including direct, indirect, special, incidental and\
+ consequential damages, such as lost profits;\
+ \
+ iii) states that any provisions which differ from this Agreement are\
+ offered by that Contributor alone and not by any other party; and\
+ \
+ iv) states that source code for the Program is available from such\
+ Contributor, and informs licensees how to obtain it in a\
+ reasonable manner on or through a medium customarily used for\
+ software exchange.\
+ \
+ When the Program is made available in source code form:\
+ a) it must be made available under this Agreement; and\
+ \
+ b) a copy of this Agreement must be included with each copy of the\
+ Program.\
+ \
+ Each Contributor must include the following in a conspicuous location\
+ in the Program:\
+ \
+ Copyright \'a9 \{date here\}, International Business Machines Corporation\
+ and others. All Rights Reserved.\
+ \
+ In addition, each Contributor must identify itself as the originator\
+ of its Contribution, if any, in a manner that reasonably allows\
+ subsequent Recipients to identify the originator of the Contribution.\
+ \
+ 4. COMMERCIAL DISTRIBUTION\
+ \
+ Commercial distributors of software may accept certain\
+ responsibilities with respect to end users, business partners and the\
+ like. While this license is intended to facilitate the commercial use\
+ of the Program, the Contributor who includes the Program in a\
+ commercial product offering should do so in a manner which does not\
+ create potential liability for other Contributors. Therefore, if a\
+ Contributor includes the Program in a commercial product offering,\
+ such Contributor ("Commercial Contributor") hereby agrees to defend\
+ and indemnify every other Contributor ("Indemnified Contributor")\
+ against any losses, damages and costs (collectively "Losses") arising\
+ from claims, lawsuits and other legal actions brought by a third party\
+ against the Indemnified Contributor to the extent caused by the acts\
+ or omissions of such Commercial Contributor in connection with its\
+ distribution of the Program in a commercial product offering. The\
+ obligations in this section do not apply to any claims or Losses\
+ relating to any actual or alleged intellectual property infringement.\
+ In order to qualify, an Indemnified Contributor must: a) promptly\
+ notify the Commercial Contributor in writing of such claim, and b)\
+ allow the Commercial Contributor to control, and cooperate with the\
+ Commercial Contributor in, the defense and any related settlement\
+ negotiations. The Indemnified Contributor may participate in any such\
+ claim at its own expense.\
+ \
+ For example, a Contributor might include the Program in a commercial\
+ product offering, Product X. That Contributor is then a Commercial\
+ Contributor. If that Commercial Contributor then makes performance\
+ claims, or offers warranties related to Product X, those performance\
+ claims and warranties are such Commercial Contributor's responsibility\
+ alone. Under this section, the Commercial Contributor would have to\
+ defend claims against the other Contributors related to those\
+ performance claims and warranties, and if a court requires any other\
+ Contributor to pay any damages as a result, the Commercial Contributor\
+ must pay those damages.\
+ \
+ 5. NO WARRANTY\
+ \
+
+\f1 EXCEPT AS EXPRESSLY SET FORTH IN THIS AGREEMENT, THE PROGRAM IS\
+ PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY\
+ KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT LIMITATION, ANY\
+ WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, MERCHANTABILITY\
+ OR FITNESS FOR A PARTICULAR PURPOSE
+\f0 . Each Recipient is solely\
+ responsible for determining the appropriateness of using and\
+ distributing the Program and assumes all risks associated with its\
+ exercise of rights under this Agreement, including but not limited to\
+ the risks and costs of program errors, compliance with applicable\
+ laws, damage to or loss of data, programs or equipment, and\
+ unavailability or interruption of operations.\
+ \
+ 6. DISCLAIMER OF LIABILITY\
+ \
+
+\f1 EXCEPT AS EXPRESSLY SET FORTH IN THIS AGREEMENT, NEITHER RECIPIENT NOR\
+ ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY DIRECT, INDIRECT,\
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING\
+ WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND ON ANY THEORY OF\
+ LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING\
+ NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OR\
+ DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED\
+ HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.\
+
+\f2\fs16 \
+
+\f0\fs20 7. GENERAL\
+ \
+ If any provision of this Agreement is invalid or unenforceable under\
+ applicable law, it shall not affect the validity or enforceability of\
+ the remainder of the terms of this Agreement, and without further\
+ action by the parties hereto, such provision shall be reformed to the\
+ minimum extent necessary to make such provision valid and enforceable.\
+ \
+ If Recipient institutes patent litigation against a Contributor with\
+ respect to a patent applicable to software (including a cross-claim or\
+ counterclaim in a lawsuit), then any patent licenses granted by that\
+ Contributor to such Recipient under this Agreement shall terminate as\
+ of the date such litigation is filed. In addition, If Recipient\
+ institutes patent litigation against any entity (including a\
+ cross-claim or counterclaim in a lawsuit) alleging that the Program\
+ itself (excluding combinations of the Program with other software or\
+ hardware) infringes such Recipient's patent(s), then such Recipient's\
+ rights granted under Section 2(b) shall terminate as of the date such\
+ litigation is filed.\
+ \
+ All Recipient's rights under this Agreement shall terminate if it\
+ fails to comply with any of the material terms or conditions of this\
+ Agreement and does not cure such failure in a reasonable period of\
+ time after becoming aware of such noncompliance. If all Recipient's\
+ rights under this Agreement terminate, Recipient agrees to cease use\
+ and distribution of the Program as soon as reasonably practicable.\
+ However, Recipient's obligations under this Agreement and any licenses\
+ granted by Recipient relating to the Program shall continue and\
+ survive.\
+ \
+ IBM may publish new versions (including revisions) of this Agreement\
+ from time to time. Each new version of the Agreement will be given a\
+ distinguishing version number. The Program (including Contributions)\
+ may always be distributed subject to the version of the Agreement\
+ under which it was received. In addition, after a new version of the\
+ Agreement is published, Contributor may elect to distribute the\
+ Program (including its Contributions) under the new version. No one\
+ other than IBM has the right to modify this Agreement. Except as\
+ expressly stated in Sections 2(a) and 2(b) above, Recipient receives\
+ no rights or licenses to the intellectual property of any Contributor\
+ under this Agreement, whether expressly, by implication, estoppel or\
+ otherwise. All rights in the Program not expressly granted under this\
+ Agreement are reserved.\
+ \
+ This Agreement is governed by the laws of the State of New York and\
+ the intellectual property laws of the United States of America. No\
+ party to this Agreement will bring a legal action under this Agreement\
+ more than one year after the cause of action arose. Each party waives\
+ its rights to a jury trial in any resulting litigation.\
+}
--- /dev/null
+Title OpenAFS
+Version 1.2.6
+Description The OpenAFS distributed filesystem. This package installs an almost-ready-to-run client for OpenAFS. see http://www.openafs.org for more information.
+DefaultLocation /
+Diskname (null)
+DeleteWarning
+NeedsAuthorization YES
+DisableStop NO
+UseUserMask NO
+Application NO
+Relocatable NO
+Required NO
+InstallOnly NO
+RequiresReboot NO
+InstallFat NO
+rootVolumeOnly YES
--- /dev/null
+#!/bin/sh
+if [ -d /afs -a ! -h /afs ]; then
+ rmdir /afs
+fi
+mkdir -p /Network/afs
+if [ ! -h /afs ]; then
+ ln -s /Network/afs /afs
+fi
+
+cd /var/db/openafs/etc
+
+if [ ! -f cacheinfo ]; then
+ cp cacheinfo.sample cacheinfo
+fi
+
+# testing case -- upgrading from pre 1.2.7, but .last file exists.
+# merge the .save and .last....
+if [ ! -f CellServDB -a -f CellServDB.save -a -f CellServDB.master.last ]; then
+ cp CellServDB.save CellServDB
+fi
+
+# upgrading between 2 post-1.2.7 releases (or the testing case)
+if [ -f CellServDB.master.last ]; then
+ if cmp -s CellServDB.master.last CellServDB.master ; then
+ echo No CellServDB updates
+ done=1
+ fi
+fi
+
+# the local changes were included in the update
+if [ -z "$done" -a -f CellServDB ]; then
+ if cmp -s CellServDB CellServDB.master ; then
+ echo CellServDB is up to date.
+ cp CellServDB.master CellServDB.master.last
+ done=1
+ fi
+fi
+
+if [ -z "$done" ]; then
+ # there are local changes to be merged
+ if [ -f CellServDB -a -f CellServDB.master.last ]; then
+ echo Merging CellServDB entries....
+ perl $1/Contents/Resources/csrvdbmerge.pl
+ echo done
+ else
+ # this is a new install, or an upgrade from pre-1.2.7
+ echo "Installing new CellServDB"
+ cp CellServDB.master CellServDB.master.last
+ cp CellServDB.master CellServDB
+ fi
+fi
--- /dev/null
+#!/bin/sh
+
+cd /var/db/openafs/etc
+# only do these checks if we're upgrading from a pre-1.2.7
+if [ -f CellServDB -a ! -f CellServDB.master ]; then
+ CK=`md5 CellServDB | awk '{ print $4 }'`
+ if grep -q $CK $1/Contents/Resources/CellServDB.list; then
+ # it matched one of our previously released files
+ echo Unmodified CellServDB -- not preserving
+ :
+ else
+ if [ ! -f CellServDB.master.last ]; then
+ echo Modified CellServDB -- saving as /var/db/openafs/etc/CellServDB.save
+ echo Please re-merge it manually -- this will not be required for future upgrades
+ fi
+ cp CellServDB CellServDB.save
+ fi
+fi
+if [ -f config/afsd.options -a -f config/afsd.options.sample ]; then
+ if cmp -s config/afsd.options config/afs.options.sample; then
+ echo Removing no-longer needed afsd.options file
+ rm -f config/afsd.options
+ fi
+fi
--- /dev/null
+{\rtf1\mac\ansicpg10000\cocoartf100
+{\fonttbl\f0\fswiss\fcharset77 Helvetica;}
+{\colortbl;\red255\green255\blue255;}
+\margl1440\margr1440\vieww9000\viewh9000\viewkind0
+\pard\tx1440\tx2880\tx4320\tx5760\tx7200\ql\qnatural
+
+\f0\fs20 \cf0 This release of OpenAFS is known to be compatible with MacOS 10.1 (kernel version 1.4, build 5L21) as well as 10.1.1 (kernel version 5.1, build 5M28), 10.1.2 (Darwin 5.2, build 5P48), 10.1.3 (Darwin 5.3, build 5Q45), 10.1.4 (Darwin 5.4, build 5Q125), and 10.1.5 (Darwin 5.5, build 5S60a)\
+\
+Select a client cell name by creating /var/db/openafs/etc/ThisCell\
+\
+The Finder may not detect the existance of afs at login. If you open the /Network folder, it should be visible there.\
+\
+The root.afs.local hack should no longer be required beginning with OpenAFS rele
+ases newer than 1.2.6. The OpenAFS cache manager now includes functionality that
+ should prevent lengthy delays when the finder accesses the afs root. If you cre
+ated a /var/db/openafs/etc/config/afsd.options file for this purpose, it should
+be removed.\
+\
+Reboot when all of this is done.}
--- /dev/null
+#!/bin/sh
+
+if [ -z "$1" ]; then
+ echo Usage: buildpkg binary-dir
+ exit 1
+fi
+BINDEST=$1
+RESSRC=`pwd`
+if [ ! -f /usr/bin/package ]; then
+ echo "/usr/bin/package does not exist. Please run this script on a MacOS X system"
+ echo "with the BSD subsystem installed"
+ exit 1
+fi
+if grep -q 'set resDir = ""' /usr/bin/package ; then
+ echo /usr/bin/package is buggy.
+ echo remove the line \''set resDir = ""'\' from /usr/bin/package and try again
+ exit 1
+fi
+
+if [ ! -f CellServDB ]; then
+ echo "A CellServDB file must be placed in the working directory"
+ die=1
+fi
+FILES="ReadMe.rtf License.rtf CellServDB.list OpenAFS.info OpenAFS.post_install OpenAFS.pre_upgrade csrvdbmerge.pl"
+for f in $FILES; do
+ if [ ! -f $f ]; then
+ echo "file missing: " $f
+ die=1
+ fi
+done
+if [ "$die" ]; then
+ echo "Correct above errors; then retry"
+ exit 1
+fi
+if [ ! -f $BINDEST/bin/translate_et ]; then
+ die=1
+fi
+if [ ! -f $BINDEST/root.client/usr/vice/etc/afs.kext/Contents/MacOS/afs ]; then
+ die=1
+fi
+if [ "$die" ]; then
+ echo $BINDEST " is not a valid binary dir. it should be the result of"
+ echo "make dest"
+ exit 1
+fi
+
+PKGROOT=$RESSRC/pkgroot
+PKGRES=$RESSRC/pkgres
+rm -rf pkgroot pkgres
+mkdir -p $PKGROOT $PKGRES
+
+mkdir $PKGROOT/Library
+chown -R root.admin $PKGROOT
+chmod -R 775 $PKGROOT
+mkdir $PKGROOT/Library/OpenAFS $PKGROOT/Library/OpenAFS/Tools
+cd $BINDEST
+pax -rw * $PKGROOT/Library/OpenAFS/Tools
+cd $RESSRC
+mkdir $PKGROOT/Library
+mkdir $PKGROOT/Library/StartupItems
+mkdir $PKGROOT/Library/StartupItems/OpenAFS
+cp $BINDEST/root.client/usr/vice/etc/afs.rc $PKGROOT/Library/StartupItems/OpenAFS/OpenAFS
+chmod a+x $PKGROOT/Library/StartupItems/OpenAFS/OpenAFS
+cp $BINDEST/root.client/usr/vice/etc/StartupParameters.plist $PKGROOT/Library/StartupItems/OpenAFS/StartupParameters.plist
+chown -R root.admin $PKGROOT/Library
+chmod -R o-w $PKGROOT/Library
+chmod -R g+w $PKGROOT/Library
+chown -R root.wheel $PKGROOT/Library/OpenAFS/Tools
+chmod -R og-w $PKGROOT/Library/OpenAFS/Tools
+
+mkdir $PKGROOT/private $PKGROOT/private/var $PKGROOT/private/var/db
+mkdir $PKGROOT/private/var/db/openafs $PKGROOT/private/var/db/openafs/cache
+mkdir $PKGROOT/private/var/db/openafs/etc $PKGROOT/private/var/db/openafs/etc/config
+cp $RESSRC/CellServDB $PKGROOT/private/var/db/openafs/etc/CellServDB.master
+echo andrew.cmu.edu > $PKGROOT/private/var/db/openafs/etc/ThisCell.sample
+echo /Network/afs:/var/db/openafs/cache:30000 > $PKGROOT/private/var/db/openafs/etc/cacheinfo.sample
+#echo '-stat 2000 -dcache 800 -daemons 3 -volumes 70 -rootvol root.afs.local' > $PKGROOT/private/var/db/openafs/etc/config/afsd.options.sample
+
+strip -X -S $PKGROOT/Library/OpenAFS/Tools/root.client/usr/vice/etc/afs.kext/Contents/MacOS/afs
+
+cp -RP $PKGROOT/Library/OpenAFS/Tools/root.client/usr/vice/etc/afs.kext $PKGROOT/private/var/db/openafs/etc
+
+chown -R root.wheel $PKGROOT/private
+chmod -R og-w $PKGROOT/private
+chmod og-rx $PKGROOT/private/var/db/openafs/cache
+
+mkdir $PKGROOT/usr $PKGROOT/usr/bin $PKGROOT/usr/sbin
+
+BINLIST="fs klog klog.krb kpasswd pagsh pagsh.krb pts sys tokens tokens.krb unlog unlog.krb"
+
+# Should these be linked into /usr too?
+OTHER_BINLIST="bos cmdebug rxgen translate_et udebug xstat_cm_test xstat_fs_test"
+OTHER_ETCLIST="vos rxdebug"
+
+for f in $BINLIST; do
+ ln -s ../../Library/OpenAFS/Tools/bin/$f $PKGROOT/usr/bin/$f
+done
+
+ln -s ../../Library/OpenAFS/Tools/root.client/usr/vice/etc/afsd $PKGROOT/usr/sbin/afsd
+
+chown -R root.wheel $PKGROOT/usr
+chmod -R og-w $PKGROOT/usr
+
+cp License.rtf ReadMe.rtf OpenAFS.post_install OpenAFS.pre_upgrade $PKGRES
+cp OpenAFS.post_install $PKGRES/OpenAFS.post_upgrade
+chmod a+x $PKGRES/OpenAFS.post_install $PKGRES/OpenAFS.post_upgrade $PKGRES/OpenAFS.pre_upgrade
+cp csrvdbmerge.pl $PKGRES
+chmod a+x $PKGRES/csrvdbmerge.pl
+cp CellServDB.list $PKGRES
+chown -R root.wheel $PKGRES
+rm -rf OpenAFS.pkg
+echo /usr/bin/package $PKGROOT OpenAFS.info -r $PKGRES
+/usr/bin/package $PKGROOT OpenAFS.info -r $PKGRES
+#old versions of package didn't handle this properly
+if [ ! -r OpenAFS.pkg/Contents ]; then
+ mkdir OpenAFS.pkg/Contents OpenAFS.pkg/Contents/Resources
+ mv OpenAFS.pkg/OpenAFS.* OpenAFS.pkg/Contents/Resources
+ mv OpenAFS.pkg/*.rtf OpenAFS.pkg/Contents/Resources
+ mv OpenAFS.pkg/csrvdbmerge.pl OpenAFS.pkg/Contents/Resources
+ mv OpenAFS.pkg/CellServDB* OpenAFS.pkg/Contents/Resources
+fi
+
+rm -rf pkgroot pkgres
+# Unfortunately, sudo sets $USER to root, so I can't chown the
+#.pkg dir back to myself
+#chown -R $USER OpenAFS.pkg
--- /dev/null
+#!/usr/bin/perl
+# CellServDB merging script
+# only tested on darwin systems
+
+use File::Copy;
+use IO::File;
+use Fcntl;
+use strict;
+
+
+sub doit {
+ my ($cur,$in,$last,$new);
+ my ($line, $oline, $cell, $pos, $which);
+ my %cellstat;
+
+ $cur=new IO::File '<CellServDB';
+ $last=new IO::File '<CellServDB.master.last';
+
+ while (defined($line=<$cur>)) {
+ if ($line =~ /^>([-a-zA-Z0-9\._]+)\s/) {
+ if ($cell) {
+ $oline=<$last>;
+ if ($oline && $oline !~ /^>/) { # fewer servers in user's file than master
+ $cellstat{$cell} = 1;
+ }
+ }
+ $cell=$1;
+ $cellstat{$cell}=2;
+ # start at the beginning of the old file, and find $cell
+ $last->seek(0,SEEK_SET);
+ while (<$last>) {
+ if (/>$cell\s/) { # note that we don't compare the cell comments
+ $cellstat{$cell}=0;
+ last;
+ }
+ }
+ next;
+ }
+ if (! $cell) {
+ die "First CellServDB line isn't a cell\n";
+ }
+ next if ($cellstat{$cell} == 2); # cell only in local CellServDB
+ next if ($cellstat{$cell} == 1); # already found a local change
+ $oline=<$last>;
+ if ($oline =~ /^>/) { # more servers in user's file than master
+ $last->setpos($pos);
+ $cellstat{$cell} = 1;
+ next;
+ }
+ next if ($line eq $oline);
+ $cellstat{$cell} = 1;
+ }
+ close($last);
+ $cur->seek(0,SEEK_SET);
+ $cur=new IO::File '<CellServDB' or die "No CellServDB: $!\n";
+ $in=new IO::File '<CellServDB.master' or die "No CellServDB.master: $!\n";
+ $new=new IO::File '>CellServDB.NEW' or die "Cannot create output CellServDB: $!\n";
+ while (defined($line=<$cur>)) {
+ if ($line =~ /^>([-a-zA-Z0-9\._]+)\s/) {
+ $cell=$1;
+ $which=$cellstat{$cell};
+ unless ($which) {
+ $in->seek(0,SEEK_SET);
+ while (<$in>) {
+ if (/>$cell\s/) {
+ last;
+ }
+ }
+ if (defined($_)) {
+ print $new $_;
+ while (defined($line=<$in>) && $line !~ /^>/) {
+ print $new $line;
+ }
+ }
+ }
+ }
+ if (! $cell) {
+ die "First CellServDB line isn't a cell\n";
+ }
+ if ($which) {
+ print $new $line;
+ }
+ }
+ close($in);
+ close($cur);
+ close($new);
+ rename('CellServDB.NEW', 'CellServDB');
+ copy('CellServDB.master', 'CellServDB.master.last');
+}
+
+doit;
--- /dev/null
+Included in this directory are copies of the files used to create OpenAFS
+binary packages. Because the Debian and RedHat packaging files are
+maintained externally, they are not included here.
projects / packages / o / openafs.git / commitdiff