Steve Simmons [Tue, 31 Aug 2010 23:21:50 +0000 (19:21 -0400)]
Update the man pages to discourage use of uss
Usually the text added was a copy of a CAUTION section that
had already been added in a few places. This change applies it
consistently across all uss-related man pages. In pod1/afs.pod that
text would be excessively wordy; a briefer note is used there to
direct the reader to the full text.
This is a partial fix for RT bug #128018. It does not fully close
the bug; the AFS Administrators Guide needs to be updated as well.
Andrew Deason [Fri, 12 Nov 2010 16:03:43 +0000 (10:03 -0600)]
doc: Fix fileserver synopsis
The fileserver synopsis was missing the leading 'fileserver' before
the options list. This causes the options list to not be interpreted
as POD, and so you get a lot of ugly unprocessed POD markup in the man
page. Fix that.
Simon Wilkinson [Tue, 5 Oct 2010 08:01:00 +0000 (09:01 +0100)]
Irix: Make compiler less chatty
Supress a few of our errors from the Irix compiler and linker, so its
output is a little less verbose.
This change suppresses the function declared but not used and
multiple declaration errors that we get due to our static_inline fudge
and the paramater declared but not used errors.
Other error suppression is possible - you just need the number
immediately after the 'cc-' in the build logs to say which number to
add to the -woff line.
Reviewed-on: http://gerrit.openafs.org/2908 Tested-by: Simon Wilkinson <sxw@inf.ed.ac.uk> Reviewed-by: Derrick Brashear <shadow@dementia.org> Tested-by: Derrick Brashear <shadow@dementia.org>
(cherry picked from commit e7a12d56bc3b27a3ada37e2799e1925204d23300)
Simon Wilkinson [Mon, 4 Oct 2010 11:33:24 +0000 (12:33 +0100)]
configure: Restore saved CFLAGS
When we test for whether the C compiler can take the
-fno-strength-reduce flag, we add the flag to CFLAGS to do so.
However, we were not restoring the old value of this flag when we
completed the test, and so we were always setting -fno-strength-reduce
in the userspace compile.
Previously, this was harmless, as we always overwrote CFLAGS, but if
we're moving to a world where we honour the user's setting of CFLAGS,
we need to not leak changes in this way.
AFS users not otherwise familiar with Kerberos may not realize that
one sets KRB5CCNAME to use an alternative ticket cache. Mention the
variable in the aklog man page, although defer to the Kerberos
documentation for most details.
Reviewed-on: http://gerrit.openafs.org/2761 Reviewed-by: Andrew Deason <adeason@sinenomine.net> Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Rod Widdowson <rdw@steadingsoftware.com> Reviewed-by: Russ Allbery <rra@stanford.edu>
(cherry picked from commit 089cd2c1039315fe400f85eec1c9f2152ea090c7)
Andrew Deason [Fri, 14 Jan 2011 20:52:10 +0000 (14:52 -0600)]
RX: Include netinet/ip6.h before inet/ip.h
Some older Solaris (at least some Solaris 8) requires netinet/ip6.h to
be included before inet/ip.h, or the compiler chokes on some
ipv6-related declarations in inet/ip.h. So, include it.
Simon Wilkinson [Mon, 6 Sep 2010 08:37:23 +0000 (09:37 +0100)]
aklog: Fix weak_crypto tests
The tests for the various ways of enabling weak cryptography fail
with current Heimdal master, because it defines krb5_allow_weak_crypto
but does not prototype it.
Fix this by testing for the Heimdal version (which MIT does not provide)
first, and only if that's not available, try to use allow_weak_crypto.
Simon Wilkinson [Fri, 18 Feb 2011 00:36:33 +0000 (00:36 +0000)]
RedHat packaging: Use %{dist} not %{osver}
There's a standard mechanism for defining a RPMs target
distribution in the Fedora and RedHat worlds. This is to use the
%{dist} macro, and to insert it at the end (not the beginning) of
the release field.
Move over to using this standard mechanism, and modify the build
system to match. Note that this means that RPM names have now
changed slightly.
Andrew Deason [Thu, 17 Feb 2011 21:47:00 +0000 (15:47 -0600)]
afsd: Make mountdir check kernel-specific
Checking if the /afs directory exists only makes sense for the kernel
afsd. The libuafs afsd does not care if the mount directory actually
exists on the machine or not, since it may not interact with the mount
directory path on the local machine at all.
So, make the mountdir check code be a new afsd function
(afsd_check_mount), and have it stat() the mount directory only in the
kernels-specific afsd.
RedHat: Change the defined initdir path to /etc/rc.d/init.d
On Red Hat systems, /etc/init.d is a symlink to /etc/rc.d/init.d. We
should use the actual path for packaging the init scripts, to avoid
any issues with package verification.
Reviewed-on: http://gerrit.openafs.org/3625 Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de> Reviewed-by: Derrick Brashear <shadow@dementia.org> Tested-by: BuildBot <buildbot@rampaginggeek.com>
(cherry picked from commit da912adbf1512702a17b8e381af3d0225875e67c)
Ben Kaduk [Thu, 17 Feb 2011 20:00:06 +0000 (15:00 -0500)]
Pull in 64BIT_ENV for FBSD
Support for some newer FreeBSD versions was added after we killed
AFS_64BIT_ENV, but the commit to kill it was not cherry-picked
to openafs-stable-1_6_x. Cherry-picking the new version support
thus introduced a bug, as we still need to define AFS_64BIT_ENV
for these systems on this branch.
We attempted to fix this previously, but that fix was incomplete.
Apply the full fix now.
A direct commit to openafs-stable-1_6_x, as this change is not
relevant for master.
Andrew Deason [Fri, 3 Dec 2010 22:39:57 +0000 (16:39 -0600)]
LINUX: Define zero_user_segment
When the kernel does not have the zero_user_segments function, we
define it ourselves. Also define the zero_user_segment function, since
we use it, and a kernel lacking zero_user_segments will also lack
zero_user_segment.
Reviewed-on: http://gerrit.openafs.org/3432 Tested-by: Andrew Deason <adeason@sinenomine.net> Reviewed-by: Matt Benjamin <matt@linuxbox.com> Reviewed-by: Simon Wilkinson <sxw@inf.ed.ac.uk> Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Derrick Brashear <shadow@dementia.org>
(cherry picked from commit fb325c3c63d844eda1da23e2ab5facba14994a6f)
Andrew Deason [Tue, 15 Feb 2011 23:21:49 +0000 (17:21 -0600)]
vol: Restore inode OS_READ/WRITE
Commit 335ccb4082657b7d0e4e9af1076356cf115642d2 removed the OS_READ
and OS_WRITE definitions for non-namei code. We need those definitions
to build the pread/pwrite emulation functions, so put them back in.
This allows us to build the inode fileserver backend when we do not
have native positional I/O.
Andrew Deason [Mon, 14 Feb 2011 19:53:11 +0000 (13:53 -0600)]
HPUX: Disable positional I/O
Some versions of HP-UX have the pread() and pwrite() functions, but
they behave in odd ways; most notably, ignoring the offset argument
when _FILE_OFFSET_BITS is defined to 64.
This is noted in recent gnulib documentation
<http://git.savannah.gnu.org/cgit/gnulib.git/tree/doc/posix-functions/pwrite.texi>,
and slightly less clear references to pread() being broken can be
found on the development mailing list for git itself.
It is not completely clear what specific HP-UX versions are affected
by this. An autoconf run-time test may also be insufficient, because
the same binaries should be usable on machines with broken and
non-broken pread() implementations. So, to be safe, disable positional
I/O on HP-UX unconditionally.
Derrick Brashear [Thu, 20 Jan 2011 03:56:12 +0000 (22:56 -0500)]
MacOS: don't allow krb5 at login when AD plugin authenticates
if AD is being used to verify authentication (e.g. via builtin)
don't allow get krb5 at login to succeed. since a helper does this we can't
grey the option, but we can decline to act on it.
Andrew Deason [Fri, 12 Nov 2010 16:32:57 +0000 (10:32 -0600)]
doc: Do not process .in files for html
We do not want to process .pod.in files when generating HTML versions
of the man pages. Change the filename filtering logic to only accept
.pod files, so we'll also skip over all other stuff we don't want,
like CVS or fragments directories.
Jeffrey Altman [Sat, 12 Feb 2011 16:52:12 +0000 (11:52 -0500)]
Windows: Fix GetIoctlHandle path construction
GetIoctlHandle() is used to construct the magic pioctl file
path used to initiate pioctl operations with the cache manager.
The first error introduced double directory separators. The
second error was testing an uninitialized value which could
have resulted in a missing directory separator.
Jeffrey Altman [Sat, 12 Feb 2011 16:45:15 +0000 (11:45 -0500)]
Windows: Fix symlink and mount point make \\afs\xxx handling
When processing a request to make a symlink or a mount point
in the afs root volume (\\AFS) the smb redirector will fail
the request because a server name by itself is not a valid path.
Therefore, we insert the "all" share component to refer to the
root volume as a valid path. \\AFS\foobar becomes \\AFS\all\foobar.
A recent change stripped the trailing slash from the string
returned by Parent(). This broke the test that determines
whether or not the provided path that failed the IsAFS() test
is in fact referring to the \\AFS server and requires the insertion
of the "all" share name.
This patchset permits the test to work with \\AFS or \\AFS\
and removes extraneous directory separators from the generated
path containing the "all" share.
OpenBSD: Make OpenBSD 4.7 param headers consistent
OpenBSD follows the policy of using a separate common
param file (post 1.4.x). However, when introducing support
for i386 OpenBSD 4.7, this was not done and a single param
config header file was created instead. This patch changes
the param files for OpenBSD 4.7 so that they are
consistent with the other OpenBSD versions by using a
separate common param header file.
Marc Dionne [Sat, 29 Jan 2011 00:41:32 +0000 (19:41 -0500)]
Linux: 2.6.38: Adjust for permission inode operation changes
The permission i_op has a new signature with a flags argument, and
must now deal with RCU path walking.
- Fix existing configure test for this i_op, it succeeds when it
shouldn't
- Add a new configure test for the new signature
- Make our permission i_op "RCU-walk aware" - return ECHILD if
called in that mode
Marc Dionne [Sat, 29 Jan 2011 00:03:39 +0000 (19:03 -0500)]
Linux: allow compile flags to be passed to AC_CHECK_LINUX_BUILD
Some linux autoconf tests require particular compile flags such as
-Werror. Add a parameter to the AC_CHECK_LINUX_BUILD macro that
lets the caller pass in any needed special flags.
Adapt a few existing tests that were still using AC_TRY_KBUILD
directly.
Jeffrey Altman [Mon, 7 Feb 2011 21:44:09 +0000 (16:44 -0500)]
Windows: correct pthread_xxx_init semantics
pthread lock and conditional initialization semantics
do not require that the lock structure be zeroed before
pthread_xxxx_init() functions are called. Since the Windows
CriticalSection initialization does require that the memory
be zeroed, the pthread_xxxx_init() functions must zero the
memory just in case before performing the CriticalSection
initialization.
Jeffrey Altman [Mon, 31 Jan 2011 16:43:39 +0000 (11:43 -0500)]
Windows: No NCBRESET when probing Loopback after start
The Netbios NCBRESET command resets all of the Netbios state
associated with the LAN adapter including the name bindings.
In response to a detected LAN adapter IP address change, the
smb_LanAdapterChange() function is called to determine if any
Netbios LAN adapter bindings that were in use or should be in
use by afsd_service were altered. As part of the check,
lana_GetUncServerNameEx() is called which in turn calls
lana_FindLoopback() which in turn issued a lana_IsLoopback()
for each LAN adapter with the 'reset adapter' flag set to TRUE.
Calling lana_IsLoopback() with 'reset' equal TRUE was fine
when lana_GetUncServerNameEx() was only called from smb_Init(),
but it is not fine when called after the service is processing
calls. By resetting the adapter the binding of the netbios name
"AFS" (or "<MACHINE>-AFS") is removed and all outstanding calls
are canceled. If the SMB redirector attempts a reconnect during
the window before NCBADDNAM is called to re-bind the name, a
negative cache entry will be placed in the netbios name lookup
table that will prevent the SMB redirector from connecting to
the client for several minutes.
If the environment is one in which frequent IP address change
events are triggered, it is possible that the SMB redirector
will never be able to reconnect to the service.
This patchset adds a flag, LANA_NETBIOS_NO_RESET, to the
lana_GetUncServerEx interface which permits smb_LanAdapterChange()
to avoid the undesirable reset. This negative flag was selected
in order to avoid changing the current default behavior as the
lanahelper library is used by out of tree installers and it
is preferred that OpenAFS avoid breaking them unnecessarily.
Do not use reserved preprocessor symbol names. Instead
use OPENAFS_<PATH>_<HEADER>_H formatted names where <PATH>
is the subdirectory path from src/ in which the header
file originates in the repository.
Andrew Deason [Thu, 2 Sep 2010 20:05:21 +0000 (15:05 -0500)]
namei: Limit traversal when removing data dirs
namei_RemoveDataDirectories currently calls delTree with 'tree'
pointing to the part of the path immediately following n_base (i.e.
starting at the beginning of n_voldir1). This causes delTree to
traverse all of n_voldir1, trying to delete every directory it finds.
Since we are typically only trying to remove a single volume when
calling namei_RemoveDataDirectories, instead call delTree with 'tree'
pointing to immediately after n_voldir1, and beginning at n_voldir2
and try to just rmdir n_voldir1 afterwards. This way, we do not
traverse a large fraction of the entire partition when just trying to
delete a single volume, and so can significantly speed up volume
removals.
Andrew Deason [Thu, 9 Sep 2010 19:10:01 +0000 (14:10 -0500)]
namei: Do not remove n_voldir1
When removing data directories in namei_RemoveDataDirectories, do not
remove the n_voldir1 directory (directory X in /vicepa/AFSIDat/X).
Removing this directory can race against the creation of an entirely
unrelated volume, causing the create op to fail (since it tries to
create a directory in a directory that no longer exists).
We don't currently have the necessary locking to make this safe, and
since the overhead of n_voldir1 existing is pretty negligible, just
leave it there. Also add some comments briefly justifying this.
Note that other similar races probably exist for directories under
n_voldir1, but they would only be between volumes in the same VG, and
so are much less likely to occur.
Andrew Deason [Mon, 22 Nov 2010 02:29:11 +0000 (21:29 -0500)]
Remove unreached lines
Fix some macros to eliminate unreached trailing empty statements (such
as: "{code = foo; goto error;};"), and other oddities causing
"statement not reached" warnings. Also eliminate a couple of code
blocks that were never reached.
Jeffrey Altman [Thu, 28 Oct 2010 04:40:32 +0000 (00:40 -0400)]
vol: Always use INVALID_FD to indicate an invalid fd
file descriptors on Windows are not ints and therefore
cannot be safely compared against -1. Always use INVALID_FD
which is -1 on UNIX and INVALID_HANDLE_VALUE on Windows.
Reviewed-on: http://gerrit.openafs.org/3178 Reviewed-by: Derrick Brashear <shadow@dementia.org> Reviewed-by: Andrew Deason <adeason@sinenomine.net> Tested-by: Derrick Brashear <shadow@dementia.org>
(cherry picked from commit d21dd16789458c07e63abe021f93f656dba4e52c)
Andrew Deason [Thu, 2 Sep 2010 16:25:27 +0000 (11:25 -0500)]
vol: Add VInit cond var and remove busywaits
In DAFS, FSYNC_sync was waiting for VInit to reach at least 2 by
looping around pthread_yield(). For a server with a large number of
volumes, it can take a while for volumes to preattach, and so we are
effectively busy-waiting for preattach to finish. This can slow
fileserver startup and peg the cpu.
So instead, add a condition variable for when VInit changes, and wait
on that. Also modify other checkers of VInit to use the cond var.
Jeffrey Altman [Thu, 28 Oct 2010 04:43:26 +0000 (00:43 -0400)]
vol: Use OSI_NULLSOCKET and not -1 to indicate invalid fssync fd
The FSync file descriptor is an osi_socket which has an invalid
value of OSI_NULLSOCKET which is not necessarily -1. Be sure to
compare against OSI_NULLSOCKET and not -1 when checking an invalid
value.
Reviewed-on: http://gerrit.openafs.org/3179 Reviewed-by: Derrick Brashear <shadow@dementia.org> Reviewed-by: Andrew Deason <adeason@sinenomine.net> Tested-by: Derrick Brashear <shadow@dementia.org>
(cherry picked from commit e8991ff8286f151d109bb4f98d885a583e198f83)
Andrew Deason [Mon, 31 Jan 2011 21:00:09 +0000 (15:00 -0600)]
Rx: Do not stop keepalives on ACKALL receipt
We need to still keep sending periodic keepalives after receiving an
ACKALL, since the call is not done yet. ACKALLs can be received when
the peer has received all data from us, well before the call has
finished. This is particularly noticeable for long-lived calls that
have little data transfer, such as AFSVolForward and
AFSVolForwardMultiple.
Jeffrey Altman [Sun, 30 Jan 2011 04:24:16 +0000 (23:24 -0500)]
Windows: out of order locks cm_CheckCBExpiration
The recent refactoring of cm_CheckCBExpiration introduced
a lock ordering error between the cm_scache_t rw lock and the
cm_scacheLock. This patchset fixes the error by dropping the
cm_scacheLock as each cm_scache_t is being processed.
Rod Widdowson [Fri, 28 Jan 2011 16:49:03 +0000 (16:49 +0000)]
Do not compare an FD_t < 0
FD_t is an abstract type. Invalid file decriptors are == INVALID_FD.
In most places this module does the right thing. Fix the last
stragglers where it is testing as less than zero.
Reviewed-on: http://gerrit.openafs.org/3768 Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Andrew Deason <adeason@sinenomine.net> Reviewed-by: Derrick Brashear <shadow@dementia.org>
(cherry picked from commit 299e942ae98dfea3a4804c724e5d440715974e0c)
Andrew Deason [Thu, 2 Dec 2010 23:13:17 +0000 (17:13 -0600)]
RX: Avoid retrying calls on busy channels
When we receive an RX_PACKET_TYPE_BUSY packet, we currently ignore it.
This is a problem when the server has a long-running call on that same
call channel that we don't know about, since we will then keep
retrying the call on the same channel and keep getting
RX_PACKET_TYPE_BUSY responses.
Try to avoid this by returning the RX_CALL_TIMEOUT error when we get a
BUSY packet and there are other free call channels available on the
conn. When the application gets the error and retries the call, we
avoid using the same call channel again where possible. When all of
the call channels appear busy, we revert to effectively the old
behavior of retrying the call on the same channel until we get an
RX_CALL_DEAD (or similar) error.
Jeffrey Altman [Thu, 27 Jan 2011 01:10:57 +0000 (20:10 -0500)]
Windows: Correct cm_volume locking
cm_volume_t flags was used for two categories of flags. The first
protected by the cm_volume_t->rw lock. The second protected by
the global cm_volumeLock. Separate the flags field into two
afs_uint16 fields and break the flag space into FLAG and QFLAG.
Add assertions to the volume LRU functions to ensure that they
are always called with cm_volumeLock write-locked.
Correct two locations where cm_AdjustVolumeLRU() was called
read-locked instead of write-locked.
Andrew Deason [Tue, 25 Jan 2011 16:46:38 +0000 (10:46 -0600)]
vol-salvage: Only delete bad vnodes during !check
In SalvageIndex, if check is true, we're only supposed to check for
consistency and not actually change anything (this is enforced by an
assert later on). The check for vnode magic consistency breaks this
assumption, and just always fixes the vnode.
Change this so we just error out if check is set, and the vnode magic
is wrong.
Rod Widdowson [Sun, 23 Jan 2011 14:29:51 +0000 (14:29 +0000)]
Windows: fix parameters and return value from nt_seek
SetFilePointerEx takes specific values
(FILE_BEGIN/FILE_CURRENT/FILE_END) whilse fseek requires SEEK_SET,
SEK_END, SEEK_CUR. It turns out that these overlap, but we should
not let that pass unchallenged.
SetFilePointerEx returns nonzero for success zero for failure. fseek
returns the other way around.
Neither of these changes currently matter, but we should fix them.
Reviewed-on: http://gerrit.openafs.org/3746 Reviewed-by: Andrew Deason <adeason@sinenomine.net> Reviewed-by: Jeffrey Altman <jaltman@openafs.org> Tested-by: Jeffrey Altman <jaltman@openafs.org>
(cherry picked from commit 4f838b03bbf9ea0e1ede8a188ea6dde3efb4e231)
Rod Widdowson [Sun, 23 Jan 2011 10:59:28 +0000 (10:59 +0000)]
Windows: read and write take void* buffers, open takes a const char*
nt_read and nt_write were defined to take a char* buffer which was
then cast to a void *. Meantime every call of OS_READ and
OS_WRITE were casting to a char*.
Equally every call of OS_OPEN was passing down a const char*,
causing warnings.
This checkin fixes this:
nt_read : char* to void*
nt_write: char* to const void*
nt_open char* to const char*
OpenBSD: Eliminate complaint about built-in malloc.
With OpenBSD 4.8, OpenBSD now uses gcc 4. With its new
defaults, the OpenAFS compile of the kernel module now
complains incessantly about the conflict between the
built-in malloc versus the kernel version (which has
extra parameters). Therefore, set -fno-builtin-malloc
when compiling the kernel module to remove the noise
since the differences can't be reconciled otherwise.
Rod Widdowson [Sun, 23 Jan 2011 12:04:59 +0000 (12:04 +0000)]
Windows: remove faulty assumptions about device names in vol-salvage
The implementation has an assumption that all disk volumes have an
object name of \Device\HarddiskXXX (where XXX is a number). This is
wrong since the name is purely a convention and since about WXP they
have been called \Device\HarddiskVolumeXXX.
Either way it is spurious to assume the format and then try to compare
the XXX. This change just compares the strings. This is done in a
case insenstive manner which is the safer option. It is quite
feasible, but very unlikely that someone will uses 'case sensitively
different' object names.
Jeffrey Altman [Thu, 20 Jan 2011 07:15:18 +0000 (02:15 -0500)]
vol: fix CreateFile params nt_unlink and nt_open
nt_unlink: when opening a file handle to assign delete on close
status the caller must request DELETE permission.
nt_open: make sure that DELETE permission along with FILE_SHARE_DELETE
is requested if we wish to permit another CreateFile call in the future
to assign delete on close.
Reviewed-on: http://gerrit.openafs.org/3711 Reviewed-by: Andrew Deason <adeason@sinenomine.net> Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Rod Widdowson <rdw@steadingsoftware.com> Reviewed-by: Derrick Brashear <shadow@dementia.org>
(cherry picked from commit 5fdc2679dc973fa45bf4b3bc7f21a527492868db)
Jeffrey Altman [Thu, 20 Jan 2011 07:06:12 +0000 (02:06 -0500)]
vol: add comment nt_unlink cannot with fopen handles
On Windows, files opened via the CRT fopen or open
POSIX compatibility functions cannot be marked for delete
on close. Add a comment until such time as the use of
fopen and open on Windows can be replaced.
Reviewed-on: http://gerrit.openafs.org/3707 Reviewed-by: Derrick Brashear <shadow@dementia.org> Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Rod Widdowson <rdw@steadingsoftware.com>
(cherry picked from commit eb6f3a89a3f4da6d3de2d4ae34743014e4eb0fb2)
Andrew Deason [Wed, 10 Nov 2010 15:11:47 +0000 (09:11 -0600)]
Use afs_foff_t for file offsets
Some callers in vol and volser were not using afs_foff_t for file
offsets for calls to STREAM_ASEEK, FDH_TRUNC, FDH_PREAD, or
FDH_PWRITE. Most notably, in code for volume cloning, purging, and
dumping operations. Fix them to use afs_foff_t to prevent errors when
dealing with large special files.
Jeffrey Altman [Thu, 20 Jan 2011 07:11:57 +0000 (02:11 -0500)]
vol: nt_open should not create missing directories
Revert the prior change that added directory creation
to nt_open(). nt_open() should fail and the caller should
create the directories. Failure to do so results in an
incomplete tree which confuses the salvager.
Jeffrey Altman [Thu, 20 Jan 2011 06:39:11 +0000 (01:39 -0500)]
vol: make it clearer that SetOGM is not impl on Windows
Separate the SetOGM function into two implementations to
match the other OGM functions. Implement the Windows version
as returning -1 always.
In the future, the OGM functions could be renamed to express
their purpose: saving and restoring the volume id and tag
associated with a file. Windows currently encodes this
information using the CreationDate and the file name but
in the future this information might be stored in an alternate
data stream.
Jeffrey Altman [Thu, 20 Jan 2011 06:35:08 +0000 (01:35 -0500)]
vol: avoid double dir separators from addtoname
The manner in which addtoname() is used can often result
in double dir separators in path names. Check for it and
avoid doubling the separator in addtoname()
Reviewed-on: http://gerrit.openafs.org/3699 Reviewed-by: Derrick Brashear <shadow@dementia.org> Reviewed-by: Andrew Deason <adeason@sinenomine.net> Reviewed-by: Rod Widdowson <rdw@steadingsoftware.com> Tested-by: BuildBot <buildbot@rampaginggeek.com>
(cherry picked from commit 959a892afcc1f33871489912a8ea183fc7fca6c2)
Jeffrey Altman [Thu, 20 Jan 2011 06:23:37 +0000 (01:23 -0500)]
vol: clear ih_synced before dropping lock
in ih_reallyclose() clear ihP->ih_synced before dropped
the IH_LOCK. ih_reallyclose() is already committed to
performing the OS_SYNC() call. Failing to clear the ih_synced
flag before dropping the lock permits another thread, the ih_sync_all()
thread for example, to also conclude that it must sync the
file.
Jeffrey Altman [Sun, 16 Jan 2011 20:49:02 +0000 (15:49 -0500)]
Windows: refactor cm_CheckCBExpiration multihomed
cm_CheckCBExpiration() is refactored to make it easier
to read the decision process. cm_CheckCBExpiration()
determines when a callback is no longer usable and as a
result the object status info should be discarded.
The windows cache manager preserves status info past
callback expiration if all of the sources of a volume
became inaccessible prior to the callback expiration
time. The cache manager was improperly preserving the
status info for objects when the callback was issued by
a multi-homed file server when only the interface that
issued the callback is down.
A separate cm_server_t object is used to represent
each file server interface. When one interface goes
down and others are left up, the cache manager will
now replace the down cm_server_t reference for one that
is up. This substitution is performed as a side effect
of computing the effective downTime in cm_CBServersDownTime().
Jeffrey Altman [Fri, 14 Jan 2011 05:22:39 +0000 (00:22 -0500)]
Windows: use cm_ServerEqual() in cm_Analyze()
In cm_Analyze() when processing VNOVOL, VMOVED or VOFFLINE errors
do not use pointer equivalence as the test to determine if a
server is affected by the error. Use cm_ServerEqual() instead.
Fix cm_ServerEqual() to work even when both cm_server_t objects
are not UUID aware.
Jeffrey Altman [Sat, 15 Jan 2011 16:54:40 +0000 (11:54 -0500)]
vol: construct proper VolDir path on Windows
namei_HandleToInodeDir initializes the path name with
the nt_drive value. Therefore calling addtoname(name, name->n_drive)
produces the invalid path "D:\D:\\Vol_.....". Remove the unnecessary
addtoname() call.
Jeffrey Altman [Sat, 15 Jan 2011 16:47:47 +0000 (11:47 -0500)]
vol: use OS_DIRSEP when constructing paths
Do not assume that / is the directory separator when constructing
paths for internal consumption or log messages. Use OS_DIRSEP
or OS_DIRSEPC as appropriate.
projects / packages / o / openafs.git / log