Jeffrey Altman [Sat, 10 Feb 2018 15:47:24 +0000 (10:47 -0500)]
rx: Do not count RXGEN_OPCODE towards abort threshold
An RXGEN_OPCODE is returned for opcodes that are not implemented by the
rx service. These opcodes might be deprecated opcodes that are no
longer supported or more recently registered opcodes that have yet to
be implemented. Clients should not be punished for issuing unsupported
calls. The clients might be old and are issuing no longer supported
calls or they might be newer and are issuing yet to be implemented calls
as part of a feature test and fallback strategy.
This change ignores RXGEN_OPCODE errors when deciding how to adjust the
rx_call.abortCount. When an RXGEN_OPCODE abort is sent the
rx_call.abortCount and rx_call.abortError are left unchanged which
preserves the state for the next failing call.
Note that this change intentionlly prevents the incrementing of the
abortCount for client connections as they never send delay aborts.
Reviewed-on: https://gerrit.openafs.org/12906 Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit f82d1c7d5aeae148305e867c1f79c6ea2f9e0a2a)
Marcio Barbosa [Wed, 21 Jun 2017 20:24:05 +0000 (16:24 -0400)]
ubik: check if epoch is sane before db relabel
The sync-site relabels its database at the end of the first write
transaction. The new label will be equal to the time at which the
sync-site in question first received its coordinator mandate. This time
is stored by a global called ubik_epochTime. In order to make sure that
the new database label is sane, only relabel the database if
ubik_epochTime is within a specific range.
Reviewed-on: https://gerrit.openafs.org/12640 Reviewed-by: Mark Vitale <mvitale@sinenomine.net> Reviewed-by: Andrew Deason <adeason@dson.org> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu> Tested-by: BuildBot <buildbot@rampaginggeek.com>
(cherry picked from commit f5c289d00aaf7c5525b477da5b89f6675456c211)
Change-Id: I78ebd2b8aeae01ef5e3b826ad6f1de5a5c1db79e
Reviewed-on: https://gerrit.openafs.org/12886 Reviewed-by: Marcio Brito Barbosa <mbarbosa@sinenomine.net> Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Mark Vitale <mvitale@sinenomine.net> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Benjamin Kaduk [Sat, 9 Dec 2017 17:37:59 +0000 (11:37 -0600)]
Replace <rpc/types.h> with <rx/xdr.h>
Our in-tree xdr.h appears to have started life as a concatenation of
rpc/types.h and rpc/xdr.h, and should include all the needed functionality.
Indeed, commit 7293ddf325b149cae60d3abe7199d08f196bd2b9 even indicates
that we expect to be using our in-tree XDR everywhere anyway, so the
system XDR is superfluous.
Note that afs/sysincludes.h (not afsincludes.h!) already includes
rx/xdr.h ifndef AFS_LINUX22_ENV.
This change should help systems running glibc 2.26 or newer, which has
stopped providing the Sun RPC headers by default.
While here remove some duplicate includes of rpc/types.h in the
AIX-specific sources.
The Solaris NFS translator bits cannot really be changed, since the system
headers are used and have tight interdependencies.
Update rxgen to not emit rpc/types.h inclusion.
[mmeffie: squash 12801 to not emit rpc/types.h from rxgen]
Reviewed-on: https://gerrit.openafs.org/12800 Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Michael Meffie <mmeffie@sinenomine.net> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit e443a9fb67dbc29e6cc36661a4ac6e91af113f23)
Change-Id: I351e5c1e1223c49ca76e3d68c264ac1625abae60
Reviewed-on: https://gerrit.openafs.org/12894 Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Mark Vitale <mvitale@sinenomine.net> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Reviewed-on: https://gerrit.openafs.org/12884 Reviewed-by: Benjamin Kaduk <kaduk@mit.edu> Tested-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit c7c71d2429cf685f3ffad6b2e6d102d900edc197)
Change-Id: I271cfeb6aea888ae40539e248a18131b0affeda8
Reviewed-on: https://gerrit.openafs.org/12901 Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Mark Vitale <mvitale@sinenomine.net> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Mark Vitale [Tue, 30 Jun 2015 05:54:21 +0000 (01:54 -0400)]
SOLARIS: Avoid vcache locks when flushing pages for RO vnodes
We have multiple code paths that hold the following locks at the same
time:
- avc->lock for a vcache
- The page lock for a page in 'avc'
In order to avoid deadlocks, we need a consistent ordering for obtaining
these two locks. The code in afs_putpage() currently obtains avc->lock
before the page lock (Obtain*Lock is called before pvn_vplist_dirty).
The code in afs_getpages() also obtains avc->lock before the page lock,
but it does so in a loop for all requested pages (via pvn_getpages()).
On the second iteration of that loop, it obtains avc->lock, and the page
from the first iteration of the loop is still locked. Thus, it obtains a
page lock before locking avc->lock in some cases.
Since we have two code paths that obtain those two locks in a different
order, a deadlock can occur. Fixing this properly requires changing at
least one of those code paths, so the locks are taken in a consistent
order. However, doing so is complex and will be done in a separate
future commit.
For this commit, we can avoid the deadlock for RO volumes by simply
avoiding taking avc->lock in afs_putpages() at all while the pages are
locked. Normally, we lock avc->lock because pvn_vplist_dirty() will call
afs_putapage() for each dirty page (and afs_putapage() requires
avc->lock held). But for RO volumes, we will have no dirty pages
(because RO volumes cannot be written to from a client), and so
afs_putapage() will never be called.
So to avoid this deadlock issue for RO volumes, avoid taking avc->lock
across the pvn_vplist_dirty() call in afs_putpage(). We now pass a dummy
pageout callback function to pvn_vplist_dirty() instead, which should
never be called, and which panics if it ever is.
We still need to hold avc->lock a few other times during afs_putpage()
for other minor reasons, but none of these hold page locks at the same
time, so the deadlock issue is still avoided.
Benjamin Kaduk [Fri, 5 Jan 2018 04:00:15 +0000 (22:00 -0600)]
rx: remove trailing semicolons from FBSD mutex operations
Since the first introduction of FreeBSD support, the macros
(MUTEX_ENTER, etc.) for kernel mutex operations have included
trailing semicolons, unique among all the platforms.
This did not cause problems until the recent work on rx event
handlers, which put a MUTEX_ENTER() in the body of an 'if' clause
with no brackets, and attempted to follow it with an 'else' clause.
This results in the following (rather obtuse) compiler error:
Christof Hanke [Mon, 18 Dec 2017 15:58:39 +0000 (16:58 +0100)]
Avoid gcc warning
When using the configure option --enable-checking with gcc 7.2.1,
the compilation fails with
vutil.c:860:20: error: ‘%s’ directive writing up to 255 bytes into \
a region of size 63 [-Werror=format-overflow=]
This can be seen in the logs of the openSUSE Tumbleweed builder
for e.g. build 2368.
Avoid this warning by using snprintf which is provided by libroken
for all platforms.
Reviewed-on: https://gerrit.openafs.org/12813 Reviewed-by: Benjamin Kaduk <kaduk@mit.edu> Tested-by: BuildBot <buildbot@rampaginggeek.com>
(cherry picked from commit fd4eaebb60dbefc27be98015fee23a3cf5d9752d)
Marcio Barbosa [Mon, 21 Aug 2017 18:21:54 +0000 (14:21 -0400)]
ubik: avoid DISK_Begin on sites that didn't vote for sync
As already described on 7c708506, SDISK_Begin fails on remotes if
lastYesState is not set. To fix this problem, 7c708506 does not allow
write transactions until we know that lastYesState is set on at least
quorum (ubik_syncSiteAdvertised == 1). In other words, if enough sites
received a beacon packet informing that a sync-site was elected, write
transactions will be allowed. This means that ubik_syncSiteAdvertised
can be true while lastYesState is not set in a few sites.
Consider the following scenario in a cell with frequent write
transactions:
Site A => Sync-site (up)
Site B => Remote 1 (up)
Site C => Remote 2 (down - unreachable)
Since A and B are up, we have quorum. After the second wave of beacons,
ubik_syncSiteAdvertised will be true and write transactions will be
allowed. At some point, C is not unreachable anymore. Site A sends a
copy of its database to C, but C did not vote for A yet (lastYesState ==
0). A new write transaction is initialized and, since lastYesState is
not set on C, DISK_Begin fails on this remote site and C is marked as
down. Since C is reachable, A will mark this remote site as up. The
sync-site will send its database to C, but C did not vote for A yet. A
new write transaction is initialized and, since lastYesState is not set
on C, DISK_Begin fails on this remote site and C is marked as down. In a
cell with frequent write transactions, this cycle will repeat forever.
As a result, the sync-site will be constantly sending its database to C
and quorum will be operating with less sites, increasing the chances
of re-elections.
To fix this problem, do not call DISK_Begin on remotes that did not
vote for the sync-site yet.
Reviewed-on: https://gerrit.openafs.org/12715 Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Mark Vitale <mvitale@sinenomine.net> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit 68ec78950a6e39dc1bf15012d4b889728086d0b7)
Marcio Barbosa [Mon, 21 Aug 2017 19:50:14 +0000 (15:50 -0400)]
ubik: update ubik_dbVersion during SDISK_SendFile
The ubik_dbVersion global represents the sync site's database version
and it is mostly used by the remote sites for sanity checks. Currently,
this global is updated when database changes are made on the sync site
(SDISK_Commit or SDISK_SetVersion), as well as every time we vote "yes"
for the sync-site in a beacon reply. Unfortunately, ubik_dbVersion is
not updated when a copy of the sync site's database is received via
DISK_SendFile, and it won't get updated until our next "yes" vote.
During this window, the current database version will not match
ubik_dbVersion. As a result, any write transaction during this time
frame will fail on the remote site in question.
To fix this problem, do not wait for the next beacon packet to update
ubik_dbVersion when the sync site's database is received; just update
it when we get the new database. Since no write transactions are
allowed while the db is transferring, ubik_dbVersion can be safely
updated.
Reviewed-on: https://gerrit.openafs.org/12716 Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Mark Vitale <mvitale@sinenomine.net> Reviewed-by: Andrew Deason <adeason@dson.org> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit 50c1d1088d2adcbb37b6a9d23fdd63617b1267be)
Andrew Deason [Fri, 12 Jan 2018 03:27:28 +0000 (21:27 -0600)]
LINUX: Avoid locking inode in check_dentry_race
Currently, check_dentry_race locks the parent inode in order to ensure
it is not running in parallel with d_splice_alias for the same inode.
(For old Linux kernel versions; see commit b0461f2d: "LINUX:
Workaround d_splice_alias/d_lookup race".)
However, it is possible to hit this area of code when the parent inode
is already locked. When someone tries to create a file, directory, or
symlink, Linux tries to lookup the dentry for the target path, to see
if it already exists. While looking up the last component of the path,
Linux locks the directory, and if it finds a dentry for the target
name, it calls d_invalidate on it while the parent directory is
locked.
For a dentry with a NULL inode, we'll then try to lock the parent
inode in check_dentry_race. But since the inode is already locked, we
will deadlock.
From a user's point of view, the hang can be reproduced by doing
something similar to:
$ mkdir dir # succeeds
$ rmdir dir
$ ls -l dir
ls: cannot access dir: No such file or directory
$ mkdir dir # hangs
To avoid this, we can just change which lock we're using to avoid
check_dentry_race/d_splice_alias from running in parallel. Instead of
locking the parent inode, introduce a new global lock (called
dentry_race_sem), and lock that in check_dentry_race and around our
d_splice_alias call. We know that those are the only two users of this
new lock, so this should avoid any such deadlocks.
This does potentially reduce performance, since all tasks that hit
check_dentry_race or d_splice_alias will take the same global lock.
However, this at least still allows us to make use of negative
dentries, and this entire code path only applies to older Linux
kernels. It could be possible to add a new lock into struct vcache
instead, but using a global lock like this commit does is much
simpler.
Reviewed-on: https://gerrit.openafs.org/12868 Tested-by: Benjamin Kaduk <kaduk@mit.edu> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit ef1d4c8d328e9b9affc9864fd084257e9fa08445)
Caitlyn Marko [Thu, 9 Feb 2017 14:16:17 +0000 (09:16 -0500)]
SOLARIS: save kernel module function arguments for debugging
Add the -Wu,-save_args compiler option when building kernel modules
under Solaris 10 and 11 for the amd64 architecture.
Binaries generated with this option save function arguments on the stack
during function entry for debugging purposes. Up to six integer
arguments are saved on function entry, and are not modified during the
execution of the function.
[mmeffie: commit message update]
Reviewed-on: https://gerrit.openafs.org/12798 Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit 32d0493a7e4f74f5e5efdfde5eca29ed7d1bf3ec)
Marcio Barbosa [Mon, 5 Feb 2018 21:16:17 +0000 (21:16 +0000)]
autoconf: detect ctf-tools and add ctf to libafs
CTF is a reduced form of debug information similar to DWARF and stab. It
describes types and function prototypes. The principal objective of the
format is to shrink the data size as much as possible so that it could
be included in a production environment. MDB, DTrace, and other tools
use CTF debug information to read and display structures correctly.
This commit introduces a new configure option called --with-ctf-tools.
This option can be used to specify an alternative path where the tools
can be found. If the path is not provided, the tools will be searched
in a set of default directories (including $PATH). The CTF debugging
information will only be included if the corresponding --enable-debug /
--enable-debug-kernel is specified.
Note: at the moment, the Solaris kernel module is the only module
benefited by this commit.
Reviewed-on: https://gerrit.openafs.org/12680 Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit 88cb536f99dc58fdbeb9fa6c47c26774241a0cb6)
Michael Meffie [Sat, 30 Dec 2017 22:59:38 +0000 (17:59 -0500)]
autoconf: refactor linux-checks.m4
Further refactoring of the autoconf macros. Divy up the linux kernel
checks into smaller files.
This is a non-functional change. Care has been taken preserve the
ordering of the autoconf tests. Except for whitespace, the generated
configure file has not been changed by this refactoring. This has been
verified with a 'diff -u -w -B' comparison of the generated configure
file before and after applying this commit.
Reviewed-on: https://gerrit.openafs.org/12844 Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit 6a2b85cd4c00a08e165cb96d2cb56bf87c6324bc)
Michael Meffie [Sat, 30 Dec 2017 17:12:59 +0000 (12:12 -0500)]
autoconf: refactor ostype.m4
Further refactoring of the autoconf macros. Move more linux and solaris
specific checks into their own files.
This is a non-functional change. Care has been taken preserve the
ordering of the autoconf tests. Except for whitespace, the generated
configure file has not been changed by this refactoring. This has been
verified with a 'diff -u -w -B' comparison of the generated configure
file before and after applying this commit.
Reviewed-on: https://gerrit.openafs.org/12843 Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit 3c2e39bab7d927aa5f20d02a5e327927a4b2b553)
Michael Meffie [Fri, 29 Dec 2017 19:24:28 +0000 (14:24 -0500)]
autoconf: refactor acinclude.m4
The acinclude.m4 is very large and often requires to be changed for
unrelated commits. Divy up the large acinclude.m4 into a number of
smaller files to avoid so many contentions and to make the autoconf
system easier to maintain.
This is a non-functional change. Care has been taken preserve the
ordering of the autoconf tests. Except for whitespace, the generated
configure file has not been changed by this refactoring. This has been
verified with a 'diff -u -w -B' comparison of the generated configure
file before and after applying this commit.
Reviewed-on: https://gerrit.openafs.org/12842 Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit c72622a244e561173e86ffe88ee3c9a8c823a76a)
Michael Meffie [Wed, 17 Jan 2018 22:33:50 +0000 (17:33 -0500)]
redhat: fix conditional for kernel-debuginfo files directive
Commit 443dd5367e0cd9050ad39a6594c5be521271b4e9 added support for a
separate debuginfo package for the kernel module. Unfortunately, the
%files directive for the kernel module debuginfo package was incorrectly
placed in the %if stanza of the build_userspace condition, so the
rpmbuild fails when attempting to build just the kernel module.
Fix this by moving the new %files directive out of the build_userspace
conditional.
Reviewed-on: https://gerrit.openafs.org/12874 Reviewed-by: Benjamin Kaduk <kaduk@mit.edu> Tested-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit f599e1ce6354c42a9c0c8f7205ba8a03c35ea72b)
Michael Meffie [Sat, 22 Jul 2017 02:30:43 +0000 (22:30 -0400)]
redhat: avoid rpmbuild exclude directives
Older versions of rpmbuild do not support the files exclude directive,
so fall back to the old way in which we remove the files to be excluded
and list the files to be included.
Reviewed-on: https://gerrit.openafs.org/12733 Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit a71288a387095ccb4be83c1abae34ada80f53185)
Michael Meffie [Thu, 20 Jul 2017 08:13:04 +0000 (04:13 -0400)]
redhat: specify man pages without wildcards
Currently, some of the man pages are specified with the full name and
some are specified with a wildcard for the filename extension. Instead,
specify all the man pages without a wildcards to be more consistent and
to avoid putting incorrect man pages in packages.
This change removes a stray copy the klog.krb5.1 man page from
openafs-kauth-client subpackage and moves the AuthLog/AuthLog.dir man
pages to the optional openafs-kauth-server subpackage.
Reviewed-on: https://gerrit.openafs.org/12731 Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit 671db4ca5a76625d9b7133510cc1cbdda8a5d9b9)
Benjamin Kaduk [Sat, 6 Jan 2018 04:30:02 +0000 (22:30 -0600)]
Merge 1.8.0~pre4 packaging into master
The packaging was staged locally with a build package ready to upload,
just waiting on upstream's tag. Merge this in to the uploader
removal commit already on master.
Benjamin Kaduk [Thu, 4 Jan 2018 02:58:10 +0000 (20:58 -0600)]
Update NEWS entries to reflect new version
There were several versions whose changelog entries were consolidated
into a single one for the first upload to unstable; adapt the
NEWS entries to match.
Mark Vitale [Fri, 1 Dec 2017 01:26:46 +0000 (20:26 -0500)]
LINUX: Avoid d_invalidate() during afs_ShakeLooseVCaches()
With recent changes to d_invalidate's semantics (it returns void in Linux 3.11,
and always returns success in RHEL 7.4), it has become increasingly clear that
d_invalidate() is not the best function for use in our best-effort
(nondisruptive) attempt to free up vcaches that is afs_ShakeLooseVCaches().
The new d_invalidate() semantics always force the invalidation of a directory
dentry, which contradicts our desire to be nondisruptive, especially when
that directory is being used as the current working directory for a process.
Our call to d_invalidate(), intended to merely probe for whether a dentry
can be discarded without affecting other consumers, instead would cause
processes using that dentry as a CWD to receive ENOENT errors from getcwd().
A previous commit (c3bbf0b4444db88192eea4580ac9e9ca3de0d286) tried to address
this issue by calling d_prune_aliases() instead of d_invalidate(), but
d_prune_aliases() does not recursively descend into children of the given
dentry while pruning, leaving it an incomplete solution for our use-case.
To address these issues, modify the shakeloose routine TryEvictDentries() to
call shrink_dcache_parent() and maybe __d_drop() for directories, and
d_prune_aliases() for non-directories, instead of d_invalidate(). (Calls to
d_prune_aliases() for directories have already been removed by reverting commit c3bbf0b4444db88192eea4580ac9e9ca3de0d286.)
Just like d_invalidate(), shrink_dcache_parent() has been around "forever"
(since pre-git v2.6.12). Also like d_invalidate(), it "walks" the parent
dentry's subdirectories and "shrinks" (unhashes) unused dentries. But unlike
d_invalidate(), shrink_dcache_parent() will not unhash an in-use dentry, and
has never changed its signature or semantics.
d_prune_aliases() has also been available "forever", and has also never changed
its signature or semantics. The lack of recursive descent is not an issue for
non-directories, which cannot have such children.
[kaduk@mit.edu: apply review feedback to fix locking and avoid extraneous
changes, and reword commit message]
Reviewed-on: https://gerrit.openafs.org/12830 Reviewed-by: Benjamin Kaduk <kaduk@mit.edu> Tested-by: BuildBot <buildbot@rampaginggeek.com>
(cherry picked from commit afbc199f152cc06edc877333f229604c28638d07)
Change-Id: I6d37e5584b57dcbb056385a79f67b92a363e08d2
Reviewed-on: https://gerrit.openafs.org/12851 Tested-by: BuildBot <buildbot@rampaginggeek.com> Tested-by: Benjamin Kaduk <kaduk@mit.edu> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Mark Vitale [Thu, 30 Nov 2017 22:56:13 +0000 (17:56 -0500)]
LINUX: consolidate duplicate code in osi_TryEvictDentries
The two stanzas for HAVE_DCACHE_LOCK are now functionally identical;
remove the preprocessor conditionals and duplicate code.
Minor functional change is incurrred for very old (before 2.6.38) Linux
versions that have dcache_lock; we are now obtaining the d_lock as well.
This is safe because d_lock is also quite old (pre-git, 2.6.12), and it
is a spinlock that's only held for checking d_unhashed. Therefore, it
should have negligible performance impact. It cannot cause deadlocks or
violate locking order, because spinlocks can't be held across sleeps.
Reviewed-on: https://gerrit.openafs.org/12792 Reviewed-by: Benjamin Kaduk <kaduk@mit.edu> Reviewed-by: Andrew Deason <adeason@dson.org> Tested-by: BuildBot <buildbot@rampaginggeek.com>
(cherry picked from commit 5076dfc14b980aed310f3862875d5e9919fa199d)
Mark Vitale [Thu, 30 Nov 2017 21:08:38 +0000 (16:08 -0500)]
LINUX: create afs_linux_dget() compat wrapper
For dentry operations that cover multiple dentry aliases of
a single inode, create a compatibility wrapper to hide differences
between the older dget_locked() and the current dget().
No functional change should be incurred by this commit.
Reviewed-on: https://gerrit.openafs.org/12789 Reviewed-by: Andrew Deason <adeason@dson.org> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu> Tested-by: BuildBot <buildbot@rampaginggeek.com>
(cherry picked from commit 74f4bfc627c836c12bb7c188b86d570d2afdcae8)
However, since that commit, several things have happened:
- RHEL 7.4 changed the semantics of d_invalidate() such that it
invalidates the cwd, but did NOT change the return type to void.
This broke our autoconf test for detecting the new semantics.
- Further research reveals that d_prune_aliases() was not the best
choice for replacing d_invalidate(). This is because for directories,
d_prune_aliases() doesn't invalidate dentries when they are referenced
by its children, and it doesn't walk the tree trying to invalidate
child dentries. So it can leave dentries dangling, if the only
references to thos dentries are via children.
Stephan Wiesand [Fri, 22 Dec 2017 13:40:32 +0000 (14:40 +0100)]
Linux 4.15: check for 2nd argument to pagevec_init
Linux 4.15 removes the distinction between "hot" and "cold" cache
pages, and pagevec_init() no longer takes a "cold" flag as the
second argument. Add a configure test and use it in osi_vnodeops.c .
Stephan Wiesand [Fri, 22 Dec 2017 13:17:09 +0000 (14:17 +0100)]
Linux: use plain page_cache_alloc
Linux 4.15 removes the distinction between "hot" and "cold" cache
pages, and no longer provides page_cache_alloc_cold(). Simply use
page_cache_alloc() instead, rather than adding yet another test.
Marcio Barbosa [Thu, 12 Oct 2017 15:42:40 +0000 (12:42 -0300)]
macos: make the OpenAFS client aware of APFS
Apple has introduced a new file system called APFS. Starting from High
Sierra, APFS replaces Mac OS Extended (HFS+) as the default file system
for solid-state drives and other flash storage devices.
The current OpenAFS client is not aware of APFS. As a result, the
installation of the current client into an APFS volume will panic the
machine.
To fix this problem, make the OpenAFS client aware of APFS.
Reviewed-on: https://gerrit.openafs.org/12743 Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Mark Vitale <mvitale@sinenomine.net> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit 6e57b22642bafb177e0931b8fb24042707d6d62f)
Benjamin Kaduk [Fri, 15 Dec 2017 01:54:57 +0000 (19:54 -0600)]
Fix macro used to check kernel_read() argument order
The m4 macro implementing the configure check is called
LINUX_KERNEL_READ_OFFSET_IS_LAST, but it defines a preprocessor symbol
that is just KERNEL_READ_OFFSET_IS_LAST. Our code needs to check
for the latter being defined, not the former.
Reported by Aaron Ucko.
Reviewed-on: https://gerrit.openafs.org/12808 Reviewed-by: Anders Kaseorg <andersk@mit.edu> Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit edc5463f3db4b6af2307741d9f4ee8f2c81cd98e)
Benjamin Kaduk [Mon, 4 Dec 2017 23:20:57 +0000 (17:20 -0600)]
OPENAFS-SA-2017-001: rx: Sanity-check received MTU and twind values
Rather than blindly trusting the values received in the
(unauthenticated) ack packet trailer, apply some minmial sanity checks
to received values. natMTU and regular MTU values are subject to
Rx minmium/maximum packet sizes, and the transmit window cannot drop
below one without risk of deadlock.
The maxDgramPackets value that can also be present in the trailer
already has sufficient sanity checking.
Extremely low MTU values (less than 28 == RX_HEADER_SIZE) can cause us
to set a negative "maximum usable data" size that gets used as an
(unsigned) packet length for subsequent allocation and computation,
triggering an assertion when the connection is used to transmit data.
Benjamin Kaduk [Mon, 4 Dec 2017 23:20:57 +0000 (17:20 -0600)]
OPENAFS-SA-2017-001: rx: Sanity-check received MTU and twind values
Rather than blindly trusting the values received in the
(unauthenticated) ack packet trailer, apply some minmial sanity checks
to received values. natMTU and regular MTU values are subject to
Rx minmium/maximum packet sizes, and the transmit window cannot drop
below one without risk of deadlock.
The maxDgramPackets value that can also be present in the trailer
already has sufficient sanity checking.
Extremely low MTU values (less than 28 == RX_HEADER_SIZE) can cause us
to set a negative "maximum usable data" size that gets used as an
(unsigned) packet length for subsequent allocation and computation,
triggering an assertion when the connection is used to transmit data.
Benjamin Kaduk [Tue, 28 Nov 2017 04:17:28 +0000 (22:17 -0600)]
afs: Fix bounds check in PNewCell
Reported by the opensuse buildbot:
CC [M] /home/buildbot/opensuse-tumbleweed-i386-builder/build/src/libafs/MODLOAD-4.13.12-1-default-MP/rx_packet.o
/home/buildbot/opensuse-tumbleweed-i386-builder/build/src/afs/afs_pioctl.c: In function ‘PNewCell’:
/home/buildbot/opensuse-tumbleweed-i386-builder/build/src/afs/afs_pioctl.c:3075:55: error: ‘*’ in boolean context, suggest ‘&&’ instead [-Werror=int-in-bool-context]
if ((afs_pd_remaining(ain) < AFS_MAXCELLHOSTS +3) * sizeof(afs_int32))
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~
Benjamin Kaduk [Tue, 28 Nov 2017 04:07:53 +0000 (22:07 -0600)]
rx: fix call refcount leak in error case
The recent event handling normalization in commit 304d758983b499dc568d6ca57b6e92df24b69de8 had event handlers switch
to dropping their reference on the associated connection/call just
before return. An early return case was missed in the conversion,
leading to a refcount leak in an error case.
Reviewed-on: https://gerrit.openafs.org/12781 Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Michael Meffie <mmeffie@sinenomine.net> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit 66b74e78ba5fea6a8236dcd3b8b46e1dfa6a0ac7)
Change-Id: I532c49b2ef6ec95dd26a99c02e12ea53348f9690
Reviewed-on: https://gerrit.openafs.org/12783 Reviewed-by: Michael Meffie <mmeffie@sinenomine.net> Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Marcio Barbosa [Thu, 16 Nov 2017 22:24:03 +0000 (17:24 -0500)]
afs: fix kernel_write / kernel_read arguments
The order / content of the arguments passed to kernel_write and
kernel_read are not right. As a result, the kernel will panic if one of
the functions in question is called.
Michael Meffie [Mon, 6 Nov 2017 22:37:46 +0000 (17:37 -0500)]
tests: fix out of bounds access in the rx-event test
Use the NUMEVENTS symbol which defines the array size instead of an
incorrect hard coded number when checking if a second event can be added
to be fired at the same time. This fixes a potential out of bounds
access of the event test array.
Also update the comment which incorrectly mentions the incorrect number
of events in the test.
Reviewed-on: https://gerrit.openafs.org/12762 Reviewed-by: Benjamin Kaduk <kaduk@mit.edu> Tested-by: BuildBot <buildbot@rampaginggeek.com>
(cherry picked from commit 50a3eb7b7ee94bffaadc98429bd404164e89ec7f)
Change-Id: I7a975e7498c1c7416a800c9294c97ee4de4fd57a
Reviewed-on: https://gerrit.openafs.org/12779 Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Michael Meffie <mmeffie@sinenomine.net> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Benjamin Kaduk [Thu, 16 Nov 2017 10:49:49 +0000 (04:49 -0600)]
Sprinkle rx_GetConnection() for concision
Instead of inlining the body (taking the lock, incrementing the
refcount, and dropping the lock), use the convenience function
designed for this purpose.
Reviewed-on: https://gerrit.openafs.org/12772 Reviewed-by: Mark Vitale <mvitale@sinenomine.net> Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit 2ae84bf053fe66b73a2c77b5d71305bae2c17587)
Change-Id: I60794d877a76fbb7c8ba59207e710a20641cc8f1
Reviewed-on: https://gerrit.openafs.org/12778 Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Michael Meffie <mmeffie@sinenomine.net> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Benjamin Kaduk [Sun, 8 Oct 2017 03:42:38 +0000 (22:42 -0500)]
Standardize rx_event usage
Go over all consumers of the rx event framework and normalize its usage
according to the following principles:
rxevent_Post() is used to create an event, and it returns an event
handle (with a reference on the event structure) that can be used
to cancel the event before its timeout fires. (There is also an
additional reference on the event held by the global event tree.)
In all(*) usage within the tree, that event handle is stored within
either an rx_connection or an rx_call. Reads/writes to the member variable
that holds the event handle require either the conn_data_lock or call
lock, respectively -- that means that in most cases, callers of
rxevent_Post() and rxevent_Cancel() will be holding one of those
aforementioned locks. The event handlers themselves will need to
modify the call/connection object according to the nature of the
event, which requires holding those same locks, and also a guarantee
that the call/connection is still a live object and has not been
deallocated! Whether or not rxevent_Cancel() succeeds in cancelling
the event before it fires, whenever passed a non-NULL event structure
it will NULL out the supplied pointer and drop a reference on the
event structure. This is the correct behavior, since the caller
has asked to cancel the event and has no further use for the event
handle or its reference on the event structure. The caller of
rxevent_Cancel() must check its return value to know whether or
not the event was cancelled before its handler was able to run.
The interaction window between the call/connection lock and the lock
protecting the red/black tree of pending events opens up a somewhat
problematic race window. Because the application thread is expected
to hold the call/connection lock around rxevent_Cancel() (to protect
the write to the field in the call/connection structure that holds
an event handle), and rxevent_Cancel() must take the lock protecting
the red/black tree of events, this establishes a lock order with the
call/connection lock taken before the eventTree lock. This is in
conflict with the event handler thread, which must take the eventTree
lock first, in order to select an event to run (and thus know what
additional lock would need to be taken, by virtue of what handler
function is to be run). The conflict is easy to resolve in the
standard way, by having a local pointer to the event that is obtained
while the event is removed from the red/black tree under the eventTree
lock, and then the eventTree lock can be dropped and the event run
based on the local variable referring to it. The race window occurs
when the caller of rxevent_Cancel() holds the call/connection lock,
and rxevent_Cancel() obtains the eventTree lock just after the event
handler thread drops it in order to run the event. The event handler
function begins to execute, and immediately blocks trying to obtain
the call/connection lock. Now that rxevent_Cancel() has the eventTree
lock it can proceed to search the tree, fail to find the indicated event
in the tree, clear out the event pointer from the call/connection
data structure, drop its caller's reference to the event structure,
and return failure (the event was not cancelled). Only then does the
caller of rxevent_Cancel() drop the call/connection lock and allow
the event handler to make progress.
This race is not necessarily problematic if appropriate care is taken,
but in the previous code such was not the case. In particular, it
is a common idiom for the firing event to call rxevent_Put() on itself,
to release the handle stored in the call/connection that could have
been used to cancel the event before it fired. Failing to do so would
result in a memory leak of event structures; however, rxevent_Put() does
not check for a NULL argument, so a segfault (NULL dereference) was
observed in the test suite when the race occurred and the event handler
tried to rxevent_Put() the reference that had already been released by
the unsuccessful rxevent_Cancel() call. Upon inspection, many (but not
all) of the uses in rx.c were susceptible to a similar race condition
and crash.
The test suite also papers over a related issue in that the event handler
in the test suite always knows that the data structure containing the
event handle will remain live, since it is a global array that is allocated
for the entire scope of the test. In rx.c, events are associated with
calls and connections that have a finite lifetime, so we need to take care
to ensure that the call/connection pointer stored in the event remains
valid for the duration of the event's lifecycle. In particular, even an
attempt to take the call/connection lock to check whether the corresponding
event field is NULL is fraught with risk, as it could crash if the lock
(and containing call/connection) has already been destroyed! There are
several potential ways to ensure the liveness of the associated
call/connection while the event handler runs, most notably to take care
in the call/connection destruction path to ensure that all associated
events are either successfully cancelled or run to completion before
tearing down the call/connection structure, and to give the pending event
its own reference on the associated call/connection. Here, we opt for
the latter, acknowledging that this may result in the event handler thread
doing the full call/connection teardown and delay the firing of subsequent
events. This is deemed acceptable, as pending events are for intentionally
delayed tasks, and some extra delay is probably acceptable. (The various
keepalive events and the challenge event could delay the user experience
and/or security properties if significantly delayed, but I do not believe
that this change admits completely unbounded delay in the event handler
thread, so the practical risk seems minimal.)
Accordingly, this commit attempts to ensure that:
* Each event holds a formal reference on its associated call/connection.
* The appropriate lock is held for all accesses to event pointers in
call/connection structures.
* Each event handler (after taking the appropriate lock) checks whether
it raced with rxevent_Cancel() and only drops the call/connection's
reference to the event if the race did not occur.
* Each event handler drops its reference to the associated call/connection
*after* doing any actions that might access/modify the call/connection.
* The per-event reference on the associated call/connection is dropped by
the thread that removes the event from the red/black tree. That is,
the event handler function if the event runs, or by the caller of
rxevent_Cancel() when the cancellation succeed.
* No non-NULL event handles remain in a call/connection being destroyed,
which would indicate a refcounting error.
(*) There is an additional event used in practice, to reap old connections,
but it is effectively a background task that reschedules itself
periodically, with no handle to the event retained so as to be able
to cancel it. As such, it is unaffected by the concerns raised here.
While here, standardize on the rx_GetConnection() function for incrementing
the reference count on a connection object, instead of inlining the
corresponding mutex lock/unlock and variable access.
In contrast to what was done on master, for the 1.8 branch we do not
force-enable refcount checking.
Reviewed-on: https://gerrit.openafs.org/12756 Reviewed-by: Mark Vitale <mvitale@sinenomine.net> Reviewed-by: Michael Meffie <mmeffie@sinenomine.net> Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit 304d758983b499dc568d6ca57b6e92df24b69de8)
Benjamin Kaduk [Thu, 5 Oct 2017 04:03:44 +0000 (23:03 -0500)]
Adjust rx-event test to exercise cancel/fire race
We currently do not properly handle the case where a thread runs
rxevent_Cancel() in parallel with the event-handler thread attempting
to fire that event, but the test suite only picked up on this issue
in a handful of the Debian automated builds (somewhat less-resourced
ones, perhaps).
Modify the event scheduling algorithm in the test so as to create a
larger chunk of events scheduled to fire "right away" and thereby
exercise the race condition more often when we proceed to cancel
a quarter of events "right away".
Reviewed-on: https://gerrit.openafs.org/12755 Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Mark Vitale <mvitale@sinenomine.net> Reviewed-by: Michael Meffie <mmeffie@sinenomine.net> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit bdb509fb1d8e0fdca05dffecdbcbf60a95ea502e)
Change-Id: I27cebed3c2c3daff10b8d3f5f6f949e667791a72
Reviewed-on: https://gerrit.openafs.org/12774 Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Michael Meffie <mmeffie@sinenomine.net> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Michael Laß [Thu, 2 Nov 2017 20:16:49 +0000 (21:16 +0100)]
gtx: link against libtinfo if termlib is seperated
If ncurses is built with "./configure --with-termlib=tinfo", gtx fails
to link because of an undefined reference to the LINES symbol which is
then provided by libtinfo.so and not libncurses.so.
If ncurses is present, additionally check whether LINES is provided by
ncurses or tinfo and set $LIB_curses accordingly.
This change is based on a patch provided by Bastian Beischer.
FIXES 134420
Reviewed-on: https://gerrit.openafs.org/12760 Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit 311f1d28a2f626350b33ad432e674055b62511bd)
Change-Id: I2f69fe51bbefeeb2a17145a88aa9c891644f2f61
Reviewed-on: https://gerrit.openafs.org/12763 Tested-by: BuildBot <buildbot@rampaginggeek.com> Reviewed-by: Michael Laß <lass@mail.uni-paderborn.de> Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
projects / packages / o / openafs.git / log